Polyurethane sealants in Saudi Arabia are elastic, moisture-curing joint sealants specified for warehouse and factory floors, airport and port pavements, precast facades and water structures. This page lists Saudi polyurethane sealant suppliers and covers the main grades, ASTM C920 and ISO 11600 classes, the SASO conformity question, how Riyadh heat and coastal humidity change application, and the factors behind price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified polyurethane sealants suppliers who quote for your order directly.
Tell us about polyurethane sealants in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi projects specify polyurethane (PU) sealants mainly for joints in concrete: floor and pavement joints that carry traffic, precast and blockwork movement joints, and joints in tanks and treatment plants. They are one product line within sealants and adhesives in Saudi Arabia, chosen for abrasion resistance and paintability where silicone would be too soft or would not take a coating.
| Grade | Saudi applications | What to put in the specification |
|---|---|---|
| High modulus one part PU | Logistics and factory floors in Riyadh and Dammam industrial cities, parking structures, airport terminals | ISO 11600 F 25 HM, ASTM C920 Use T, Shore A hardness, resistance to fuel, oils and cleaning chemicals |
| Low modulus one part PU | Precast cladding, blockwork, villa and compound facades that will be painted | ISO 11600 F 25 LM or ASTM C920 class, primer on porous concrete, overpainting test |
| Self-levelling PU | Wide slab joints, hangar and apron joints | ASTM C920 Grade P, maximum slope, joint width limits |
| Two part PU | High-volume civil joints, deep sections | ASTM C920 Type M, mix ratio, pot life at site temperature |
For glass and sun-facing facade joints, Saudi consultants normally switch to silicone sealants. Joint depth is set by joint fillers and backer rod, which should be specified in the same section, and bonding of panels or tiles belongs with construction adhesives.
Polyurethane wins where joints are walked or driven on, where the sealant will be painted, and where tough abrasion resistance matters; silicone wins on glass and on joints under full sun. Mixing the two carelessly causes failures.
Sika's guidelines for its Sikaflex range say a polyurethane bond line exposed to UV radiation will fail unless protected, and that silicone or silicone oil on a substrate prevents polyurethane from adhering. On Saudi refurbishment and maintenance contracts, especially in older compounds and malls, joints previously sealed with silicone must be cut out and the faces ground clean before PU goes in. Some PU products are marketed as UV stable, but confirm that claim in the exact product's data sheet.
Riyadh's dry summer heat shortens working time and overheats substrates, coastal humidity in Jeddah and the Eastern Province speeds up skinning, and dust everywhere ruins adhesion. Plan sealing around these, not around the programme alone.
Joint geometry follows the product. Sika gives 10 mm to 50 mm joint width with a 1 : 0.8 width to depth ratio for PRO-3; Fosroc gives 2 : 1 for Nitoseal PU40 in 5 mm to 35 mm joints. Use the submitted product's figures.
Performance of polyurethane sealants in Saudi Arabia is set by ASTM, ISO or EN classes in the project specification. On the regulatory side, no SASO technical regulation written specifically for construction joint sealants could be confirmed as of 2026, so importers should confirm the conformity route for their HS code with a SASO-approved notified body.
| Requirement | What it covers | Authority or body |
|---|---|---|
| ASTM C920 | Elastomeric joint sealants: Type S or M, Grade NS or P, movement class, use classes including T for traffic | ASTM, called up in project specifications |
| ISO 11600 | Building joint sealant classes such as F 25 HM and F 25 LM | ISO |
| EN 15651-4 | Sealants for pedestrian walkways | CEN |
| Product and shipment certificates where a technical regulation applies | Imported regulated products cleared through SABER | SASO and its notified bodies |
| Owner material approvals | Plant, utility and infrastructure projects | The owner or its engineering contractor |
SASO's glue and adhesive regulation, described on the Saudi sealants and adhesives overview, excludes construction adhesives covered by other regulations, which is why the route for a PU sealant needs confirming case by case. The guide to SASO and SABER certificates explains product and shipment certificates. For chemical plants in Jubail, compare the resistance list on the data sheet with the actual spill risk: Sika, for example, lists PRO-3 as resistant to seawater, dilute alkalis, diesel and jet fuel but not to alcohols, organic acids or concentrated acids and alkalis.
Saudi supply comes from construction chemical companies with plants or offices in the Kingdom and from building materials distributors in Riyadh, Jeddah and Dammam. Brands with polyurethane sealants include:
Questions to ask: which classification and use classes the product carries; who holds any SASO or SABER certificate and whether stock is made in the Kingdom or imported per order; primer needs per substrate; adhesion test results on your concrete; and manufacturing date with remaining shelf life. Our supplier sourcing guide covers wider checks, and you can post your requirement to receive several Saudi quotes on the same list.
Price depends on grade, pack and certification status; delivery depends on whether the product is stocked in the Kingdom and how far the site is from the main cities.