Safety gloves in Saudi Arabia are the mechanical, chemical, thermal, welding and electrical insulating gloves that employers must supply free under the Labor Law, and that importers must certify through SASO and SABER. This page lists Saudi safety glove suppliers and covers the glove standards in the SASO PPE regulation, how to read their markings, Gulf climate selection and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified safety gloves suppliers who quote for your order directly.
Tell us about safety gloves in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Within the Saudi personal protective equipment market, gloves are the item bought most often and in the widest variety: a petrochemical shutdown in Jubail can need leather riggers' gloves, cut-resistant knits, chemical gauntlets, welders' gloves and insulating electrical gloves in the same week. HRSD states that the employer supplies protective equipment, trains workers in its use and may not charge them or deduct its cost from wages. The SASO PPE regulation then decides which glove can be imported and sold at all. Regulatory details below were checked in October 2026.
Annex 1 of SASO's Technical Regulation for Personal Protective Equipment and Clothing (04-04-18-165) lists the glove standards that count as proof of conformity. A Saudi glove tender normally names one or more of them, and the importer's SABER certificate should cite the same standard.
| Standard listed by SASO | What it covers | Typical Saudi use |
|---|---|---|
| EN 388 | Mechanical risks: abrasion, cut, tear, puncture, optional impact | Pipe handling, steel erection, scaffolding, warehouses |
| EN-ISO 374-1 | Dangerous chemicals, classed Type A, B or C | Chemical loading, laboratories, water treatment dosing |
| EN 407 | Thermal risks: heat and flame | Hot work, furnace and kiln areas, sun-heated pipe |
| EN 12477 | Protective gloves for welders | Fabrication yards and shutdown welding |
| SASO-IEC-60903 | Live working gloves of insulating material | Electrical maintenance and substations |
| SASO-ISO-13999-1 and -2 | Gloves and arm guards against hand knife cuts and stabs | Meat and food processing |
| EN 421 | Ionizing radiation and radioactive contamination | Radiography and nuclear medicine |
The annex says its list is under review and that suppliers must use the latest editions on SASO's website, so confirm the edition named on the certificate. Gloves are usually ordered together with eye and face protection for grinding and chemical work and safety footwear to SASO-ISO-20345 or ASTM F2413, and welding gauntlets often come from welding PPE suppliers along with helmets and screens.
Read the code under each pictogram rather than the product name: the code tells you the tested level, and the same glove family can come in several levels. An X in any position means not tested.
Saudi Arabia tests gloves in two ways: dry heat and dust inland around Riyadh and Qassim, and humid heat on the Gulf coast at Jubail and Dammam and on the Red Sea at Jeddah and Yanbu. In both, the usual failure is a glove removed because it is too hot or too slippery, so comfort is part of protection.
Inland, sand and dust strip coatings fast, so look at the EN 388 abrasion digit for logistics and masonry crews, and use contact heat rated gloves for pipe and steel that has stood in the sun. On the coast, sweat soaks fully dipped gloves; palm-coated knits with open backs, foam nitrile grip for oily valves, and a spare pair per shift work better. Rubber gloves and coated knits age in hot storage, so ask for shelf life and keep stock out of un-cooled containers. HRSD bans outdoor work under direct sun from 12:00 pm to 3:00 pm between 15 June and 15 September; our heat stress and summer PPE guide covers the rest of the heat plan.
Every glove covered by the SASO PPE regulation needs a certificate of conformity from a SASO notified body, registered on SABER by the importer. The regulation's Annex 1-b places gloves under customs heading 4015 among the listed products.
| Requirement | Applies to | Authority |
|---|---|---|
| Supply appropriate PPE free of charge and train workers to use it | All employers | HRSD |
| Certificate of conformity, conformity assessment Type 3 of ISO/IEC 17067 | Supplier placing gloves on the market | SASO |
| Label with supplier name and commercial registration, country of origin, and protection level and risk type | Every glove product sold in the Kingdom | SASO |
| Instructions for use in Arabic, or Arabic and English | Every glove product | SASO |
| Product Certificate of Conformity (PCoC), valid one year, and a Shipment Certificate (SCoC) per consignment | Importers registering gloves on SABER | SASO, via SABER |
Intertek confirms the one-year PCoC validity and that an SCoC covers that shipment only. Our guide to SASO and SABER certificates walks through the platform.
Saudi safety gloves come from manufacturers' Saudi offices, authorised distributors and multi-brand safety stockists in Riyadh, Dammam and Al Khobar, Jeddah and the industrial cities of Jubail and Yanbu. A distributor that already holds a PCoC for a glove model can deliver from stock; a model never registered on SABER needs testing and certification before the first container clears.
Glove brands carried include Ansell mechanical and chemical gloves, MAPA Professional chemical gloves, Showa nitrile coated gloves, HexArmor high-cut gloves, Ringers impact gloves for oilfield work, Mechanix Wear mechanics' gloves and Karam work gloves. Ask every supplier for the SABER PCoC per model in its own name, the test report behind it, a sample Arabic label, shelf life, and pairs for a wear trial; plant operators may also keep their own approved glove list. To collect quotes against one glove schedule, post a safety glove requirement listing tasks, standards, levels and monthly volumes.
Midday break dates and hours for the UAE and Saudi Arabia, plus the heat stress controls and PPE specifications HSE managers need for summer outdoor work.
How to choose safety shoes for UAE and Saudi sites: what S3S, PL, SR, HRO and ESD mean, steel vs composite, Gulf heat, SASO and MoIAT conformity, brands, replacement and an RFQ checklist.