Power Distribution Suppliers, Saudi Arabia
Power distribution equipment in Saudi Arabia covers the substations, ring main units, busduct, energy meters, power factor correction and voltage regulators that take power from the SEC network or a private plant to the loads. This page lists Saudi suppliers and explains SEC distribution specifications, the 230/400 V transition, smart metering, the IEC standards in tenders, the effect of Saudi heat and dust, and what drives cost and delivery.
0 suppliers found · 5 subcategories
No suppliers match these filters
Try clearing some filters — or post your requirement and let matching suppliers come to you.
Post your requirement, get quotes from multiple suppliers
Tell us about power distribution in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
What is power distribution equipment and what do Saudi buyers specify?
Power distribution equipment is the hardware between a utility or plant supply and the final circuits: it switches medium voltage, steps it down, carries current around a site, meters it and corrects its quality. ListGCC lists it as a family under energy and renewables in Saudi Arabia. Saudi buyers range from SEC and its contractors to giga-project developers, industrial cities, hospitals and residential compounds.
| Type | Saudi application | Points to fix in the specification |
|---|---|---|
| Distribution and compact substations | SEC network extensions, housing projects, industrial plots in MODON cities, giga-project districts | Primary voltage of the local network, RMU arrangement, transformer kVA and losses, enclosure temperature class, SEC specification compliance |
| Busduct systems | Transformer to switchboard connections, hospital and hotel risers, data centre power | Current rating derated for room temperature, conductor metal, IP rating, fire-rated crossings |
| Energy meters and monitoring | SEC customer metering, tenant and process sub-metering, energy management systems | Accuracy class, CT ratio, protocol, data integration, SEC acceptance for billing meters |
| Power factor correction | Factories, cold stores, malls with large motor and chiller loads | kvar size and steps, detuning against harmonics, controller, temperature category |
| Voltage regulators and stabilisers | Remote farms and camps on long feeders, construction power, sensitive process equipment | kVA, input range, response time, efficiency, bypass switch |
The switching and transforming parts of a package come from switchgear and panel suppliers, MV switchgear makers and transformer manufacturers, while feeders use cables and wiring. New solar plants and grid battery projects connect to the network through the same substation equipment.
How do SEC specifications shape distribution purchases in Saudi Arabia?
Equipment that will become part of the SEC network must meet SEC's own distribution materials specifications, known as SDMS, and come from a manufacturer SEC has accepted. These specifications sit on top of the IEC standards and set ratings, construction details, tests and documentation for items such as ring main units, transformers, cables and LV distribution pillars.
- Network voltages: SEC medium-voltage distribution commonly runs at 13.8 kV, with 33 kV in some regions, so confirm the primary voltage for the exact location before ordering an RMU or transformer.
- Revisions: SDMS documents are revised over time, so ask the supplier which revision their type tests and approval cover.
- Private networks: inside a plant or giga-project, the owner's specification applies, which may be an Aramco, SABIC, MODON or developer standard rather than SEC.
Low voltage is also changing. SASO says a Council of Ministers resolution (No. 425 of 1431 H) moved Saudi residential and commercial supply from 127/220 V to 230/400 V, and that 127 V supply is being phased out gradually under SEC supervision. Equipment for older areas may still meet 127/220 V systems, so check the actual supply on site.
How far has smart metering gone in Saudi Arabia?
SEC finished replacing more than 10 million mechanical meters with smart meters across all regions in about 13 months, Argaam reported in April 2021, and about 4 million of them, roughly 40%, were manufactured in the Kingdom. For buyers this means utility revenue meters are an SEC matter, while the growing market for private buyers is sub-metering, power quality monitoring and energy management behind the SEC meter, where communication protocols and integration with building or plant systems matter as much as accuracy class.
How should distribution equipment be specified for Saudi heat and dust?
Specify for the hottest enclosure temperature, not the weather station figure. Riyadh, Qassim and the interior see very high summer peaks, dust storms load filters across the Kingdom, and the Red Sea and Gulf coasts add humidity and salt.
Outdoor substations and kiosks
A compact substation in direct sun heats its transformer beyond open-air conditions. IEC 62271-202 defines enclosure classes that express that extra temperature rise; ask which class was type-tested and how the transformer was derated. Shading, light finishes and adequate ventilation reduce the penalty.
Capacitors, busduct and electronics
Power factor correction capacitors have an IEC 60831-1 temperature category, and many Saudi LV rooms exceed it in summer without cooling. Busduct ratings must be derated for warm risers. Voltage stabilisers and meters with electronics need their own operating temperature confirmed.
Sand and salt
Fine sand gets through louvres and settles on insulation. Ask for the IP rating, filter access, and coastal corrosion protection for sites near Jeddah, Yanbu, Jubail and Dammam.
Which standards and approvals apply to power distribution in Saudi Arabia?
Saudi distribution equipment is specified to IEC standards, with SEC SDMS requirements for utility network items and SASO conformity for regulated imports. Check the edition each specification cites, as of 2026.
| Requirement | Scope | Authority or user |
|---|---|---|
| SEC distribution materials specifications (SDMS) | RMUs, transformers, cables, pillars and other SEC network materials | Saudi Electricity Company |
| IEC 62271-200 | Metal-enclosed MV switchgear above 1 kV up to 52 kV, internal arc classification | SEC, owners, consultants |
| IEC 62271-202:2022 | Prefabricated substations above 1 kV up to 52 kV | SEC, owners, consultants |
| IEC 61439-6 | Low-voltage busbar trunking systems | Consultants and manufacturers |
| IEC 60831-1 | Shunt power capacitors up to 1,000 V for power factor correction | Consultants and panel builders |
| IEC 62053-21 and 62053-22 | Energy meter accuracy classes | SEC and sub-metering specifications |
| SASO technical regulations and SABER | Product and shipment certificates for regulated electrical imports | SASO and approved conformity bodies |
The SASO and SABER guide explains certificates for imported electrical equipment, and protection devices are covered under circuit protection.
Who supplies power distribution equipment in Saudi Arabia?
Saudi distribution equipment comes from Saudi transformer and substation factories, international switchgear brands with Saudi assembly or agents, and distributors that stock meters, capacitor banks and stabilisers.
- Saudi Transformers Company manufactures distribution and power transformers and compact and packaged substations in the Kingdom.
- Lucy Electric makes ring main units, packaged substations and grid automation equipment.
- Ormazabal and Efacec supply RMUs, MV switchgear and compact substations.
- Elsewedy Electric supplies MV and LV cables, distribution transformers and turnkey electrical infrastructure.
- ABB and Siemens supply switchgear, distribution transformers and distribution boards.
- Socomec offers power and energy monitoring and transfer switching.
For SEC network items, ask for proof of SEC acceptance for the exact model and SDMS revision. For private networks, ask for type test reports, local content details and Saudi service support. The supplier sourcing guide explains how to check commercial registration and agency agreements.
What affects the cost and lead time of power distribution equipment in Saudi Arabia?
Factory capacity for transformers and switchgear, metal prices and SEC or owner approvals set most of the cost and schedule; standard meters and capacitor components are usually stocked.
- Specification: SEC SDMS items are built to order and tested to SEC requirements, which takes longer than catalogue equipment.
- Local manufacture: Saudi-made transformers and substations avoid import clearance and can help local content scores.
- Copper and aluminium: busduct, cable and transformer prices follow metal markets; agree whether prices are fixed or indexed.
- Imports: imported items need SABER certificates before arrival at King Abdulaziz Port in Dammam or Jeddah Islamic Port.
Share the single-line diagram, network voltage, site conditions and specification with each bidder, then post your requirement to Saudi power distribution suppliers.