Low bed trailers in Saudi Arabia carry excavators, cranes, drilling equipment, transformers and tall skids on a deck set low to the road. This page covers the types, the specification points that matter on long Saudi highways, the permit position, and how to compare suppliers in Riyadh, Dammam, Jeddah and the Eastern Province.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified low bed trailers suppliers who quote for your order directly.
Tell us about low bed trailers in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A low bed trailer, also called a lowboy, is a semi-trailer with a deck dropped between the axle groups, so machinery too tall for a normal deck can pass under bridges and power lines. It is part of industrial transport in Saudi Arabia, and it sits between the flatbed trailers used for steel and pipe and the multi-axle systems used for exceptional cargo.
In the Kingdom the distances change what matters. A move from Jubail to Riyadh, or from Jeddah to a Red Sea project, runs for hours on highways, so axle rating, tyre quality and brake reliability matter as much as deck height. Faymonville describes one 8-axle lowbed with an extendable platform from 14 m to 33.5 m and a hydraulic gooseneck, which shows the kind of options available at the heavy end.
| Type | Where it is used in Saudi Arabia | Points to specify |
|---|---|---|
| Fixed-neck low bed | Moving loaders, rollers and graders between road and civil sites | Deck height, length, ramps, axle count, payload |
| Detachable gooseneck | Excavators and dozers loading from the rear at remote project sites | Neck release, loading ramps, working space |
| Extendable low bed | Pipe, vessels, wind and power-plant components | Retracted and extended length, payload at full extension |
| Multi-axle modular | Transformers, reactors and modules for petrochemical and power sites | Axle lines, axle load, steering, suspension |
| Semi-low or step deck | Cargo slightly over standard height | Upper and lower deck dimensions |
If the item is a reactor or column that requires route surveys and escorts, see heavy haulage and transport. For stacked boxes on the same routes, use container transport.
Start from the heaviest and tallest item and work back: loaded height, weight, and the route from port to site. Many Saudi sites are far from the port, so a trailer that is slightly over a limit becomes a permit and an escort over hundreds of kilometres.
Where the trailer is bought, ask that the plate data and conformity documents match what the Saudi authorities expect for heavy trailers, and confirm the requirements with the relevant authority before ordering.
Saudi conditions test low beds on distance and temperature: long loaded runs in summer, wind-blown sand and, on the coast, salt and humidity. Plan the specification and the maintenance around kilometres in heat.
Low beds use small wheels at high load, which runs tyres hot. Check pressure cold at each departure, match tyres to real axle loads and stop to inspect hubs on long moves. See industrial tyres and wheels for the tyre choices.
Sand gets into bearings, air lines and hydraulic fittings. Ask for sealed hubs, fine filters and a greasing plan for desert roads, and wipe lamps and reflectors after sandstorms.
For fleets near Jubail, Dammam, Jeddah and Yanbu, a galvanised or well-coated chassis and sealed electrics are worth paying for.
The load, not the trailer alone, triggers the exceptional load permit in Saudi Arabia. Loads that exceed standard weights and dimensions need permission from the Roads General Authority, and haulage operators need Transport General Authority licensing. The details we could verify are on our industrial transport page, as of 2026; confirm current limits, fees and documents with the authorities before quoting a programme.
| Item | Applies to | Where to confirm |
|---|---|---|
| Exceptional load permit | Indivisible loads over standard weight or size | Roads General Authority |
| Transport licence for hauliers | Freight operators and their vehicles | Transport General Authority |
| Weighbridge and checkpoint compliance | Loaded trailers on highways | Route weigh stations |
| Client site rules and lifting gear certificates | Loading, lashing and lifting at site | Project owner and competent person |
For the lifting side of a move, read about slings and shackles and mobile cranes.
Decide first between buying, leasing and hiring a hauler. Contractors with steady plant movements often buy; project teams moving a few items hire a haulier who includes trailer, tractor, driver and permits. A manufacturer order gives the right configuration but takes longer; a local distributor holds spares and service; used units need a check of frame cracks, axle condition and paperwork.
Ask for the maker's data plate, brake and tyre records and spare parts availability in your region. Then post your requirement with item dimensions, weight, route and dates to receive comparable quotes.
Price depends on axle lines, payload, neck and deck type, suspension and extendable features. Lead time depends on stock: standard units may be available locally, while custom or modular units can be built and shipped to Dammam or Jeddah. For hire, the permit, escort and distance often matter more than the daily rate, so ask what the quote includes.
A low bed load is secured by chains, binders and wedges rated for the item weight, and loaded on level, firm ground under a banksman's control. Most low bed incidents in practice come from poor loading or lashing rather than the trailer itself.
Keep the driver's trip record, permit papers and lashing certificates in the cab, since weigh stations and client gates ask for them.