Slings and shackles in Saudi Arabia are the rigging gear that joins a load to a crane or hoist: chain, wire rope and synthetic slings plus bow and dee shackles. This page covers the types, how working load limits and certificates work, Saudi heat and coastal conditions, inspection expectations, and how to compare suppliers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified slings & shackles suppliers who quote for your order directly.
Tell us about slings & shackles in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Slings wrap or hook a load, and shackles connect slings, hooks and lifting points. They are the rigging accessories of lifting equipment in Saudi Arabia, used on shutdown work at Jubail and Yanbu, in fabrication yards, on construction sites and at warehouse docks, with every crane from a mobile crane to an overhead crane.
| Type | Where Saudi buyers use it | Points to specify |
|---|---|---|
| Chain sling | Plant maintenance, rough steel and hot environments | Grade, leg count, end fittings, temperature limits |
| Wire rope sling | Construction, pipe laying and marine and offshore lifting | Rope construction, diameter, termination, length |
| Web and round slings | Finished equipment, painted steel and pipe | Width or capacity, length, label legibility, sunlight exposure |
| Bow and dee shackles | Connecting slings to lifting eyes and spreaders | Pin type, grade, WLL, size, marking |
| Hooks, master links and rings | Assembling multi-leg sets | Grade, WLL, latch, traceability |
Rigging is paired with the lifting appliance: gantry cranes, electric hoists or lifting magnets for steel plate.
The working load limit is the most the item is rated to carry in the stated use, and it is permanently marked on the item. It sits well below the breaking load. Always read the marking, reduce the WLL for leg angle and side loading, and withdraw unmarked gear.
Kito Crosby shows what good documentation looks like for its G-2130 bolt type anchor shackles: Grade 6, WLL marked on every shackle, a 6:1 design factor, WLLs from 1/3 t to 150 t, conformity to ASME B30.26, ISO 2415 and EN 13889, and EN 13889 3.1 certification available for certain sizes. Its side-loading reductions are given in a separate warnings document.
Saudi sites expose rigging to strong sun, dust and, on the coasts, salt. Textile slings weaken under ultraviolet light, and steel corrodes near Jubail, Dammam, Yanbu and Jeddah.
Store web and round slings in shaded racks or containers, and withdraw any with unreadable labels or cut covers. Our lifting equipment page explains the sunlight risk to polyester slings.
Choose galvanised or coated shackles and hooks for coastal and offshore-related work, and check threads and pins for corrosion at each inspection.
Kito Crosby rates its G-2130 shackles from minus 40 to 204 degrees Celsius. Other gear has different limits, so check hot work and chemical areas with the maker.
Slings and shackles are lifting accessories under the SASO lifting equipment regulation and under client rules. Our lifting equipment page sets out what we checked in October 2026. UK HSE guidance, a useful benchmark, sets 6 months between thorough examinations of lifting accessories, with a written report showing the date and the next due date. Large clients such as Aramco publish their own rigging hardware rules, so get the current version from the client before you buy.
| Requirement | Applies to | Authority |
|---|---|---|
| Conformity assessment for lifting machinery and components in scope | Supplied lifting gear | SASO via SABER (confirm scope for accessories) |
| Periodic examination and written report | Slings, shackles and accessories in use | SASO-approved bodies, client rules |
| Client rigging hardware rules and vendor approval | Contractors on refinery and petrochemical sites | Aramco, SABIC or plant owner |
| Certificates and unique marking | Every sling and shackle | Manufacturer and supplier |
Choose by documents and delivery. A manufacturer order suits bulk and special assemblies. An authorised distributor in Riyadh, Dammam or Jeddah holds standard grades with certificates and may arrange examination. A stockist helps in a shutdown but should supply the same markings and certificates.
Post your requirement with WLL, length, grade, quantity and delivery city to compare quotes. For the cranes the gear connects to, compare jib cranes.
Price follows material, grade, size, WLL, length, certification and finish. Standard shackles and web slings are generally stocked in the main cities, while special lengths, high-capacity shackles and offshore grades are made to order and shipped through Dammam or Jeddah. Compare quotes on the same documents, because a lower price may leave out certificates.
A rigger checks marking, condition and angle before each lift, since the periodic examination does not replace a look before use. On client sites this check is usually part of the lift plan.
Tag failed items and remove them from the store. Keep rigging in a shaded, locked locker with a register by ID and examination date, so overdue gear is never issued to a crew, especially during shutdowns when many crews draw gear at once.