Liquid applied membranes in Saudi Arabia are site-applied polyurethane, polyurea, PMMA and water-based coatings that form a jointless waterproof layer on roofs, podium decks, balconies, tanks and wet areas. This page sets out the types Saudi projects specify, how Riyadh heat and coastal humidity limit application, the SABER, Saudi Building Code and European Technical Assessment points to check as of 2026, the brands available and the cost drivers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified liquid applied membranes suppliers who quote for your order directly.
Tell us about liquid applied membranes in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Liquid applied membranes belong to the waterproofing systems used across Saudi construction: coatings poured, rolled or sprayed on site that cure into a single elastic layer with no laps. Saudi contractors use them on villa and apartment roofs in Riyadh, on podium decks and balconies in Jeddah towers, and on plant roofs in Dammam and Jubail, wherever penetrations make sheet detailing slow. The rules below were reviewed in October 2026.
Saudi projects rely mainly on polyurethane liquids, with spray polyurea for large areas and tanks, PMMA for fast detail work and water-based coatings under tiles. The European assessment scheme, summarised by Kiwa, covers each of these families, from polymer modified bitumen and water dispersible polymers through to polyurethane, polyurea, polyaspartic and reactive PMMA.
| Membrane chemistry | Where Saudi sites use it | Points for the enquiry |
|---|---|---|
| Single-pack polyurethane, cured by air moisture | Flat concrete roofs, terraces, overlays on aged bitumen | Coats and consumption, reinforcement fleece, top coat if exposed, European Technical Assessment |
| Two-pack polyurethane | Podium slabs and balconies finished with screed or tiles | Pot life in Saudi heat, crack bridging, protection screed thickness |
| Aliphatic top coat | Sun-exposed roofs and multi-storey car parks | Colour stability, abrasion and traffic rating, compatibility |
| Spray polyurea (pure or hybrid) | Warehouse roofs, reservoirs, bridge and parking decks | Spray equipment, trained crew, adhesion testing, cure speed |
| Fleece-reinforced PMMA | Penetrations, upstands, quick turnaround balconies | Substrate primers, cure time, ventilation in occupied buildings |
| Water-based polymer or acrylic coating | Bathrooms and kitchens under ceramic tiles, light roofs | EN 14891 class for tiling, dry film thickness, recoat time |
Other systems may suit better. Foundations and podiums often take bituminous sheet waterproofing, potable water tanks commonly use cementitious coatings, and basement rafts below the water table can rely on crystalline admixtures and slurries combined with a membrane. Roof sheets and reflective finishes are covered under roof waterproof membranes.
In Saudi Arabia the risk sits in the application window. Riyadh and Qassim roofs get very hot by late morning, Jeddah and the Eastern Province coast add high humidity, and dust storms anywhere can coat a primed surface. Cured membranes cope with sun when protected by the right top coat; uncured coats are the weak point.
A Sika product data sheet for the GCC market, covering the one-component aromatic polyurethane Sikalastic M 640, sets limits that most Saudi summers break at midday:
In practice, Saudi applicators start at dawn, stop when a surface thermometer reads above the data sheet maximum, and on the Red Sea and Gulf coasts check dew point before each coat. Containers left in the sun at a Riyadh site or a Dammam yard can exceed the storage limit within hours, so plan deliveries close to use.
Aromatic polyurethanes are economical but discolour and chalk in sunlight. On an exposed Saudi roof, specify an aliphatic top coat, such as the aliphatic Hyperdesmo ADY coats Alchimica makes, or cover the membrane with insulation and tiles. Sika's exposed build-up for M 640 includes a top coat that the non-exposed build-up drops.
Sand that lands on a primer or a first coat will show later as poor adhesion and pinholes. Put cleaning before each coat into the method statement, use fleece at every drain, upstand and crack, and measure wet film thickness during application rather than trusting the drum count.
Saudi liquid membranes are approved through the Saudi Building Code for the building, SASO's SABER system for imported products, and the European assessments that consultants call up. As of October 2026 a typical submittal covers the items below; confirm the technical regulation for your HS code with SASO.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Saudi Building Code | Roof and foundation design of the building | Saudi Building Code Center |
| SABER product certificate (one year) and shipment certificate (each consignment) where a technical regulation applies | Imported construction products | SASO, through recognised bodies |
| European Technical Assessment to EAD 030350-00-0402 | Liquid roof waterproofing kits | EOTA assessment bodies |
| Extreme climate zone (S) and high TH class | Roofs exposed to Saudi sun | Declared in the kit's ETA |
| EN 14891 | Liquid membranes beneath bonded ceramic tiles | CEN European standard |
TÜV Rheinland lists construction products among SABER's regulated categories and describes a product certificate valid for one year plus a certificate for every shipment. On the technical side, an ETA declares working life (W2 for ten years, W3 for 25), climatic zone (M for Mediterranean or S for extreme), user load from P1 to P4, slope from S1 to S4 and surface temperature classes, as Kiwa explains. For a Saudi roof, insist on the extreme climate zone S and check that the W class supports the warranty term. The guide to SASO and SABER certificates sets out the import steps.
Saudi buyers get liquid membranes from manufacturers with Kingdom or Gulf production, their appointed distributors, and certified applicators who carry the installation warranty. Pick the applicator with the product, because most makers only warrant systems their trained crews install.
Liquid waterproofing makers carried here include Sika (Sikalastic polyurethane membranes), Fosroc (Nitoproof range, including the two-pack 650PU), Soprema (Alsan liquid roofing systems), Alchimica (Hyperdesmo membranes and top coats), Mapei (Purtop polyurea) and Dr Fixit (Pidilite roof coatings).
Saudi prices depend on chemistry, total consumption and how many details the roof has; delivery depends on Kingdom stock, SABER clearance and port routing through Jeddah Islamic Port or King Abdulaziz Port in Dammam.
The supplier sourcing guide for Saudi Arabia and the UAE covers vendor vetting. To compare quotes on one basis, post your requirement with area, exposure, substrate and the working life you need.