Line pipes and fittings in Saudi Arabia are the API 5L pipe, WPHY butt weld fittings, flanges and branch tees used to build crude, gas, product and water pipelines for Aramco, utilities and industrial cities. This page lists Saudi line pipe and fitting suppliers and covers pipe grades and making routes, fitting standards, Aramco and local content points, documentation, and what changes price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified line pipes & fittings suppliers who quote for your order directly.
Tell us about line pipes & fittings in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi pipelines need two matched sets of material: API 5L line pipe in the grade, level and size the design calls for, and fittings and flanges in equal strength that can be welded into it without weakening the line. They form one part of pipeline equipment and materials in Saudi Arabia, next to valves, coatings, pigging and cathodic protection.
| Product | Where it is used in Saudi Arabia | Key points in the enquiry |
|---|---|---|
| Seamless line pipe | Wellsite flowlines, sour gas gathering, high pressure spools in Eastern Province fields | Grade, PSL 2, sour annex, wall thickness, hardness limits |
| HFW / ERW line pipe | Gathering systems, product and water lines, utility networks in industrial cities | Grade, seam heat treatment and inspection, OD and wall tolerances |
| LSAW and spiral SAW pipe | Large gas trunk lines and long water transmission lines from Red Sea and Gulf desalination plants | Diameter, wall, grade, seam UT and radiography, coating compatibility |
| WPHY elbows, tees, reducers and caps | Pipeline changes of direction, branches and terminations, station piping | WPHY class to MSS SP-75, matched bevel and wall, sour hardness |
| Barred tees and extruded split tees | Branch connections on piggable lines and hot tap points | Bars to stop pigs entering the branch, design pressure, size on size or reduced |
| Weld neck flanges, spectacle blinds | Valve, scraper trap and metering connections | ASME B16.5 or B16.47 series, class, face finish, bore to match pipe |
Two related categories complete the line: API 6D pipeline valves for isolation and scraper traps and pigs, which depend on full-bore fittings and barred tees to pass. External pipeline coatings are normally ordered with the pipe.
Start from the fluid, the H2S content and the design pressure, which fix the API 5L grade, PSL and annexes; then choose the making route by diameter and wall; then order fittings and flanges to the same strength and sour requirements. A mismatch between pipe and fitting grade is one of the most common reasons for rejected material at site.
Many Saudi gas and some crude systems contain H2S. Pipe for that duty is PSL 2 with the sour annex of API 5L, and every fitting and flange welded into it should meet the hardness and material limits of NACE MR0175/ISO 15156. Ask for the sour qualification records (hydrogen induced cracking and sulfide stress cracking tests) from the mill, not only a statement of compliance.
MSS SP-75 fittings are graded by minimum yield strength, WPHY-42 through WPHY-70, and cover sizes up to NPS 60; dimensions for NPS 14 and under follow ASME B16.9. An X60 line, for example, normally takes WPHY-60 fittings. Hot induction bends sit outside SP-75 and need their own purchase specification.
Pipe stored in open laydown yards near Jubail, Yanbu or along a desert route sees intense sun and blowing sand for months. Keep bevel protectors and end caps on, stack on padded skids clear of the ground, and check the coating maker's outdoor storage limit for UV exposure before installation.
Large water transmission systems carrying desalinated water inland use SAW steel pipe in large diameters, often with internal linings. Grade and wall are driven by surge pressure as much as by operating pressure, so share the surge analysis with bidders.
As of 2026, Saudi line pipe and fittings are ordered to API 5L or ISO 3183, MSS SP-75 and ASME flange and fitting standards, with Aramco materials specifications layered on top for Aramco projects. Suppliers to Aramco register through its supplier portal, and local content counts in both Aramco and government tenders.
| Item | What it governs | Organisation |
|---|---|---|
| API Spec 5L, 46th edition | Line pipe grades, PSL 1 and PSL 2, sour and offshore annexes | American Petroleum Institute |
| ISO 3183:2019 | Supplements API 5L 46th edition with ISO exceptions; confirmed in 2026 | ISO |
| MSS SP-75 | High-strength butt weld fittings, WPHY-42 to WPHY-70 | Manufacturers Standardization Society |
| ASME B31.4 / B31.8 | Pipeline design, testing and operation | ASME |
| Aramco supplier registration and IKTVA | Vendors and contractors supplying Saudi Aramco | Saudi Aramco |
| Mandatory List and local content preference | Government supply tenders | Local Content and Government Procurement Authority (LCGPA) |
For government tenders, the LCGPA keeps a Mandatory List of national products, and non-compliant bids can be excluded; national products not on the list can still be evaluated as though competing foreign bids were 10% higher, as Clyde and Co summarised in 2026. Check whether your pipe or fitting is listed with the authority. For Aramco work, IKTVA scores in-Kingdom value, and MEED reported in February 2026 that Aramco had reached a 70% local content level with 75% targeted for 2030. If imported fittings or flanges fall under a SASO technical regulation, SABER certificates apply; our SASO and SABER guide explains the process, and the pipe fittings and flanges standards guide covers markings and certificates.
Saudi projects buy line pipe from in-Kingdom pipe mills and from importing mills' agents, and fittings and flanges from forging houses and stockists in Dammam, Jubail and Jeddah. Local mills carry weight because of local content scoring, while heavy wall seamless pipe and some forged items are still largely imported.
Brands on ListGCC that make the product include Hyundai Steel for API 5L ERW and SAW pipe, NKK (JFE Steel) for seamless line pipe and Huagong for welded API 5L pipe. Forged flanges come from KOFCO, Binda Galperti, Melisi and Metalfar. RMA Middle East in Bahrain makes split and barred tees and insulating joints, and Araflex supplies spiral wound and RTJ gaskets for the flanged joints.
When you compare offers, ask for the producing mill's name on the certificate, sour test records where relevant, and the Aramco approval status if the order is for Aramco. Send your material take-off when you post a requirement for line pipe and fittings to reach several Saudi suppliers.
Steel prices and the grade set the base cost; delivery depends on mill slots, sour testing, coating, inspection and the port of entry.
