Gear pumps in Saudi Arabia are rotary positive displacement pumps for lube oil, fuel, bitumen, resins and polymers. This page explains the pump types, the viscosity data a supplier needs, protection in hot dusty sites and API 676 and SASO points, with links to Saudi suppliers of gear pumps.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified gear pumps suppliers who quote for your order directly.
Tell us about gear pumps in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Centrifugal and positive displacement pumps compared: curves vs flat flow, end suction, split case and multistage pumps, gear, progressing cavity, diaphragm and peristaltic pumps, and a duty-by-duty selection table.
Gear pumps are rotary positive displacement pumps that move oils, fuels, resins and polymers by trapping liquid between meshing gears, and in Saudi Arabia they run lube and seal oil systems, fuel and diesel transfer, bitumen loading, and polymer and resin lines at Jubail and Yanbu. They are one of five designs on the positive displacement pumps page for Saudi Arabia. This page looks at the gear pump in detail.
| Gear pump | Saudi duty | Specify |
|---|---|---|
| External gear | Lube oil skids, hydraulic oil, diesel and fuel transfer at higher pressure | Pressure, speed, materials, seal type |
| Internal gear | Fuel oil, bitumen, asphalt, resins, adhesives and viscous chemicals | Viscosity range, jacketing, relief valve, slow speed |
| Gear pump on a skid | Lubrication and seal oil packages for turbines and compressors | Filtration, relief setting, cold-start viscosity |
Gear pumps that drive machines are sold separately as hydraulic pumps. Process gear pumps appear inside lubrication systems and next to oil industrial lubricants storage.
A supplier needs the liquid name, viscosity at minimum and maximum temperature, flow, discharge pressure, suction condition and drive, because gear pump flow falls as pressure rises and as the liquid thins. Without the viscosity range, the quote is a guess.
As a scale of what series can cover, one maker rates its large external gear pump series up to 45 cubic metres per hour, 170 bar and from 0.1 to 1,000,000 cSt. Treat such figures as the outer limits of a whole range, not of one pump.
Protect them with a discharge relief valve, suction strainer, correct seals and shade for the skid. The pump relies on the liquid for lubrication and cannot tolerate grit or dry running.
On commissioning, run the pump on the real liquid, check the discharge pressure against the relief setting, listen for cavitation at the suction and record motor current at the operating temperature. A gear pump that is quiet and draws steady current on day one is far easier to keep running than one that is adjusted only after the first failure. Keep a spare gear set, shaft seal and relief valve spring on site for pumps that serve critical lube or fuel lines.
For thin chemicals use a diaphragm pump; for pressure injection a piston pump.
Saudi oil, gas and petrochemical projects usually specify rotary pumps against API 676 with project-specific additions from Saudi Aramco or the EPC contractor, while general industry accepts the maker standard. We found no national gear pump standard; electrical parts and imports follow SASO and SABER where a technical regulation applies. Checked as of 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| API 676 | Rotary positive displacement pumps for process service | API, via project specification |
| Aramco or EPC specification | Lube oil, seal oil and transfer pumps in plant projects | Saudi Aramco, EPC contractors |
| SASO and SABER | Electrical motors and controls, where covered by a technical regulation | SASO |
| Hazardous area certification | Motors and instruments in classified zones | Plant owner, applicable regulation |
| Vendor registration | Pump suppliers to Saudi Aramco | Saudi Aramco |
Our SASO and SABER certificate guide explains the import paperwork.
Gear pumps in Saudi Arabia come from pump distributors, hydraulic dealers and skid packagers in Riyadh, Jeddah, Dammam and Jubail. The ListGCC brands whose gear pumps drive machinery are Bosch Rexroth and Parker Hannifin; process transfer ranges come from specialist rotary pump makers represented by distributors in the supplier directory.
Price follows size, materials, seal choice, jacketing and standard compliance; we do not publish prices. Cast iron industrial pumps are often stocked in Riyadh, Jeddah and Dammam. Stainless, magnetic drive, jacketed and API 676 pumps are made to order and may arrive through Jeddah Islamic Port or King Abdulaziz Port.
Ask for spare gear sets and seal kits at quotation. To compare quotes, post your requirement with the liquid, viscosity range, pressure and drive, and read the sourcing guide.