Diaphragm pumps in Saudi Arabia use a flexing membrane to move chemicals, slurries and process liquids, and serve chemical injection, desalination dosing and plant transfer. This page covers AODD and metering types, materials, API 675 and SASO and SABER points, with links to Saudi suppliers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified diaphragm pumps suppliers who quote for your order directly.
Tell us about diaphragm pumps in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Centrifugal and positive displacement pumps compared: curves vs flat flow, end suction, split case and multistage pumps, gear, progressing cavity, diaphragm and peristaltic pumps, and a duty-by-duty selection table.
Diaphragm pumps use a flexing membrane and two check valves to push liquid through, keeping the pumped fluid away from the drive and any seal. In Saudi Arabia they feature in chemical injection, desalination and water treatment dosing, refinery and petrochemical transfer, mining and paint and coating plants. They are one of five designs on the positive displacement pumps page for Saudi Arabia, which explains relief protection across the group; this page concentrates on the diaphragm family.
| Diaphragm pump type | Drive | Where it appears in Saudi plants |
|---|---|---|
| Air-operated double diaphragm | Compressed air | Drum and sump transfer, slurry, solvents, tank cleaning waste, refinery utilities |
| Mechanical metering | Motor and crank | Low-pressure dosing on cooling water and small skids |
| Hydraulic metering | Oil-backed diaphragm | Accurate injection of inhibitors, antiscalant and acid at higher pressure |
For large flows of clean liquid use centrifugal pumps; for lifting liquids from a low level, a self-priming pump may fit the duty.
An AODD pump is the right choice for intermittent transfer of aggressive, dirty or flammable liquids, where self-priming, dry running and no electric motor outweigh energy cost. The flow is set by the air inlet, and the pump stalls safely against a closed valve.
Specify the air supply with the pump. Give the supplier your available air pressure and flow, because an AODD pump slows or stalls when the air is short, and the flow you read on a catalogue curve is measured at a stated air pressure and discharge head. Ask for the curve for your own conditions rather than the headline maximum.
For continuous all-day duty, compare running cost: compressed air is energy intensive, and an electrically driven pump on a well-sized compressor system or direct motor can be cheaper to run.
Select materials in this order: liquid compatibility, temperature, then solids and pressure. The diaphragm, check balls and seats are the parts that fail, so list them in the quotation.
Pumps that dose treatment chemicals belong to wider water treatment chemical systems; protect the discharge with safety relief valves. Valve fundamentals are in our industrial valves selection guide.
For oil, gas and petrochemical work, Saudi specifications usually call up API 675 for hydraulic diaphragm metering pumps, with Saudi Aramco or the EPC contractor adding project requirements and approved vendor lists. There is no single national diaphragm pump standard that we found; confirm product certification for electrical parts and imports with SASO or SABER. Checked as of 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| API 675 | Hydraulic diaphragm and packed plunger metering pumps | API, via project specification |
| Aramco or EPC specification | Metering and transfer pumps for plant projects | Saudi Aramco, EPC contractors |
| SASO and SABER | Electrical motors and controls on a skid, where they fall under a technical regulation | SASO |
| Hazardous area equipment | Motors and instruments in classified zones | Plant owner, applicable regulation |
| Vendor registration | Pump suppliers to Saudi Aramco | Saudi Aramco |
The paperwork route is explained in our SASO and SABER certificate guide.
Choose a supplier that stocks diaphragm kits, can supply datasheets and has service staff near your plant. Ingersoll Rand is the ListGCC brand with an air-operated diaphragm line, ARO, and offers high-pressure 2:1 models with stainless wetted sections. If the duty turns out to be viscous oil, look at gear pumps; for slurry dosing, peristaltic pumps; for pressure injection, piston pumps.
Price is driven by size, wetted materials, diaphragm type and package scope; we do not publish prices. PTFE and stainless pumps cost more than polypropylene, and hydraulic metering pumps cost more than mechanical ones. Standard AODD models are often stocked in Riyadh, Jeddah and Dammam, while API 675 pumps and special materials take longer, arriving through Jeddah Islamic Port or King Abdulaziz Port.
Ask for repair kit prices up front. To get comparable quotes, post your requirement with liquid, temperature, flow, head and air supply, and read the sourcing guide.