Bronze products in Saudi Arabia are copper-tin and other copper alloy bar, bushes, castings, sheet and strip used for bearings, pump impellers, valve parts, marine and power-plant components and electrical springs. This page covers bronze types, the EN standards Saudi specifications quote, desert and seawater service points, and how to source bronze from Saudi stockists, foundries and brands.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified bronze products suppliers who quote for your order directly.
Tell us about bronze products in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order phosphor bronze bar and strip, cast bronze impellers, bushes and valve parts, bronze valves and machined bearing components. Bronze is part of copper products in Saudi Arabia, used by pump and valve makers, power and desalination plants, marine yards and maintenance shops.
| Product | Typical Saudi use | Buyer check |
|---|---|---|
| Phosphor bronze bar (CuSn5, PB102, CW451K) | Bushes, gears, springs, pump and valve spindles | Alloy certificate, size tolerance, temper |
| Phosphor bronze strip (CuSn6, CuSn8) | Connectors, switch contacts, springs | Temper, thickness tolerance |
| Cast bronze | Impellers, valve bodies, glands, bearing shells | Alloy, test report, pattern ownership |
| Bronze valves | Water, steam and marine service | Pressure class, marked standard |
| Machined bronze parts | OEM and maintenance spares | Drawing, fit tolerance, surface finish |
Righton Blackburns describes PB102 as about 5% tin with up to 0.4% phosphorus, additions that improve wear resistance, strength, stiffness and corrosion resistance, and Smith Metal calls it the most common wrought phosphor bronze grade used in the UK. For other copper alloys see brass products, copper sheets and strips and copper pipes and tubes.
Use bronze for bearings, wear parts and corrosive fluids where iron would corrode and brass would wear or suffer dezincification. It costs more and machines slowly, so use it where the duty justifies it.
Cast parts start with sand casting, bushes and sleeves can be made by centrifugal casting, and finishing is done in CNC machining or metal fabrication shops.
Desert heat and sand wear bearings, while Red Sea and Arabian Gulf seawater attack unsuitable alloys. Bronze helps in both, but only when the alloy, clearance and lubrication are right.
Applications include centrifugal pumps, marine equipment, gate valves and ball valves.
Bronze is bought to the alloy designation and standard in the specification, with castings tested for chemistry and strength. Finished goods carry SASO conformity, and energy projects use owner approvals. Checked as of 2026:
| Standard or approval | Applies to | Authority |
|---|---|---|
| EN 1982 | Copper alloy ingots and castings; 2024 revision replaced the 2017 edition | CEN |
| EN 1652 | Copper alloy plate, sheet, strip and circles | CEN |
| ASTM B103 | Phosphor bronze plate, sheet, strip and rolled bar | ASTM International |
| SASO and SABER | Regulated finished products, such as some valves and electrical items | SASO |
| Aramco or owner vendor approval | Supply to energy and utility work | The asset owner |
The EN 1982 record shows the 2017 edition withdrawn on 16 October 2024, replaced by EN 1982:2024, and notes that ingots are not suitable for pressure equipment applications. For conformity rules, read the SASO and SABER guide; for valve and fitting standards, the pipe fittings and flanges standards guide.
Specify how the part will be inspected before it is made. For a bush, that means bore and outside diameter tolerance, concentricity and surface finish; for a pump impeller, balance grade and a dimensional check against the drawing; for a valve casting, a pressure test. Agreeing these in the purchase order avoids disputes at the receiving dock, where a part that is only slightly off size can stop a plant overhaul.
Used bronze has scrap value, so mark and record bronze parts you send for repair or re-machining, and agree in writing whether worn parts stay with the workshop or come back to you.
Supply comes from metal stockists in Riyadh, Jeddah and Dammam, foundries and machine shops, and valve distributors. Brands listed here with bronze products include Pegler Yorkshire (brass and bronze valves), Nibco (bronze and brass valves), KITZ (bronze valves among its ranges), Sant (bronze globe and other valves), Crane Fluid Systems (bronze, cast iron and ductile iron valves) and Wieland, whose strip range lists phosphor bronze CuSn6 (CW452K) and CuSn8 (CW453K) on its product page.
Use the sourcing guide, then post your requirement with alloy, form, size and quantity.
Price follows copper and tin markets plus casting or machining cost, and lead time follows stock and pattern availability. Energy-sector approvals can add weeks.
For recurring spares such as pump bushes, ask the supplier to hold stock against a call-off order so a breakdown does not wait for a new casting.