Brass products in Saudi Arabia are copper-zinc alloy rod, bar, sections, sheet, strip, fittings and valves used in plumbing, electrical work, machining and hardware for construction, industry and utilities. This page covers brass grades, the EN and GSO standards Saudi specifications quote, water-service and climate points, and how to source from Saudi stockists and brands.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified brass products suppliers who quote for your order directly.
Tell us about brass products in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order free-machining bar for turned parts, cold-forming brass for pressed parts, dezincification-resistant grades for water, sheet and strip, cast brass, and finished fittings and valves. Brass is part of copper products in Saudi Arabia, and demand comes from plumbing, HVAC, electrical and machining trades.
| Product | Typical Saudi use | Buyer check |
|---|---|---|
| Free-machining bar (CW614N, CZ121) | Cable glands, connectors, valve parts, nuts and bolts | Straightness, size tolerance, alloy certificate |
| Cold-forming brass (CuZn37) | Pressed and drawn parts, strip and sheet | Temper, thickness tolerance |
| Dezincification-resistant brass | Water fittings, valves, meters | Grade and water-contact evidence |
| Brass strip and sheet | Terminals, contacts, decorative work | Alloy, temper, finish |
| Fittings and valves | Building services, irrigation, compressed air | Marked standard, pressure rating |
The data on free-machining bar is summarised by Righton Blackburns, whose page describes CZ121 as having about 3% lead as a chip breaker and the highest machinability of any copper alloy. Related products include bronze products, copper pipes and tubes and copper bus bars, which brass terminals and links often connect to.
Match the grade to the process and the fluid. A part that is turned from bar needs a free-machining grade, a part that is pressed or bent needs a cold-forming grade, and any part in contact with potable water needs the grade and compliance evidence your authority accepts.
Machined parts are often finished by CNC machining services or a wider metal fabrication shop, and brass valves appear in ball valves, check valves and gate valves.
Hot, dry inland air and humid coastal air affect brass differently, and water chemistry is the bigger risk for plumbing parts. Desalinated and blended supplies, and chlorination, can be aggressive to the wrong brass.
Brass is bought to EN, ASTM or Gulf standards named in the specification, and finished products carry SASO conformity or owner approvals. Checked as of 2026, these are the references that matter.
| Standard or approval | Applies to | Authority |
|---|---|---|
| GSO EN 1254-1:2024 | Copper alloy capillary fittings for copper tube, ends 6 to 108 mm | GSO |
| EN 1652 | Plate, sheet, strip and circles of copper and copper alloys | CEN |
| EN 1982 | Copper alloy ingots and castings; revised in 2024 | CEN |
| SASO and SABER | Regulated finished products entering Saudi Arabia | SASO |
| Owner or utility approval | Valves and fittings for Aramco, utility or giga-project work | The asset owner |
The GSO record for EN 1254-1 notes that these fittings serve water, heating, cooling, drainage, fire protection, refrigeration, fuel, gas and compressed air systems and are designed for a service life of up to fifty years. Brass castings follow EN 1982, whose Genorma record shows the 2017 edition withdrawn in 2024. The SASO and SABER guide explains conformity.
Order brass bar with a clear delivery condition. Bar can be supplied drawn, extruded or straightened, in different tempers, and the condition changes how it machines and how much it distorts after cutting. State the condition and the size tolerance, and ask for a sample length before committing to a large lot of machined parts, particularly when the parts have thin walls or long bores.
For plumbing and valve work, match the brass to the fitting standard and to the pipe it joins. Mixing brass fittings with copper tube is standard practice, but joining brass to galvanised steel in damp conditions needs an isolating joint, and a threaded brass connection needs thread sealant that suits the fluid and temperature.
Supply comes from metal stockists and traders in Riyadh, Jeddah and Dammam, workshops that machine and finish brass, and brand distributors for fittings and valves. Brands listed here that make brass components are Flowflex (brass compression fittings, check valves), Pegler Yorkshire (brass and bronze valves), Nibco (bronze and brass valves, copper fittings) and Wieland (rolled brass strip and sheet).
Use the sourcing guide, then post your requirement with grade, form, size and quantity.
Price follows the copper and zinc markets plus a conversion charge; lead time follows stock and machining. Quotes for metal-priced goods are often valid for a short time, so confirm validity.
For repeated machined-part orders, agree a stock or call-off arrangement so bar is not re-bought at every price swing.