Air dryers remove water vapour from compressed air before it condenses in pipes, tools and instruments, and Saudi plants choose between refrigeration, desiccant and membrane types. This page explains each type, how to size for desert heat and coastal humidity, the SASO and ISO requirements, and the brands and distributors that supply them.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified air dryers suppliers who quote for your order directly.
Tell us about air dryers in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Air dryers take water vapour out of compressed air before it condenses in pipes, valves, tools and instruments. Saudi plants mostly use refrigeration dryers for general air and desiccant dryers where a lower dew point is needed. They form one branch of compressed air treatment for Saudi Arabia, alongside filters and receivers.
The parent page explains the ISO 8573-1 water classes. Here the focus is the dryer: how each type works, what to ask for in a quote, and how Riyadh, Jeddah and Jubail conditions change the selection.
| Type | Principle | Typical Saudi use | Watch points |
|---|---|---|---|
| Refrigeration dryer | Chills air to about +3 degrees C pressure dew point and drains condensate | General factory air, workshops, packaging | Capacity drops as inlet and ambient temperature rise |
| Cycling refrigeration dryer | Thermal mass or variable speed follows the load | Plants with swinging demand | Higher price, lower power at part load |
| Heatless desiccant dryer | Two beds, one drying and one regenerating with purge air | Outdoor lines, instrument air, paint shops | Purge air is a continuous loss of compressed air |
| Heated or blower desiccant dryer | Heat or blower regeneration reduces purge air | Large plants, refineries, petrochemical units | More auxiliaries to maintain |
| Heat-of-compression dryer | Compressor discharge heat regenerates the desiccant | Large oil-free compressor stations | Linked to compressor load and type |
| Membrane dryer | Selective membrane strips water vapour | Small point-of-use jobs | Limited flow, uses some purge air |
The compressor upstream decides oil carryover and discharge temperature, so see industrial air compressors and screw air compressors. Downstream of the dryer you need compressed air filters and an air receiver to store the dried air.
Choose a refrigeration dryer if the pipework stays inside and a dew point near +3 degrees C is acceptable. Choose a desiccant dryer if the air goes outdoors in winter nights, through cold stores, or to instruments needing minus 20 or minus 40 degrees C. Then size the dryer at the temperature it really sees.
Central Saudi Arabia is hot in summer, but winter nights outside Riyadh and in the north can fall low enough to freeze condensate in outdoor lines. ANSI/ISA-7.0.01 asks for a dew point at least 10 degrees C below the lowest temperature the instrument air system sees. Desiccant dryers meet that where a refrigeration dryer's +3 degrees C does not.
Humid intake air carries more water into the compressor, so the dryer has more to remove. ISO 7183:2007 defines how dryers are rated, but the rating applies only at the stated inlet and ambient conditions. Give bidders your plant room temperature, the aftercooler outlet temperature and the minimum working pressure, and compare flows at those conditions.
An air cooled condenser dumps heat into the plant room, and a closed container or shed at midday can make the dryer overload itself. Provide ventilation, or choose a water cooled condenser where cooling water exists.
Zero-loss drains save air and avoid timer valve failures. A dew point sensor with an alarm on desiccant dryers shows when a bed has spent its capacity, and dew point dependent switching cuts purge air at low load. Fit a coalescing filter ahead of any desiccant dryer to protect the beds from oil.
An air dryer in Saudi Arabia is specified to ISO 8573-1 and ISO 7183, cleared through SABER if its HS code falls under a SASO technical regulation, and if it holds a pressure vessel or a refrigerant circuit, checked against the SASO Technical Regulation for Pressure Equipment. This was checked in October 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| SABER product and shipment certificates | Imported dryers and motors under a SASO technical regulation by HS code | SASO, via SABER |
| SASO Technical Regulation for Pressure Equipment (December 2022) | Pressure equipment, which may include dryer vessels and receivers | SASO |
| SASO 2893/2018 | IE3 efficiency for single-speed three-phase cage motors, such as blower motors in some dryers | SASO |
| ISO 8573-1:2010 | Purity classes for compressed air | ISO |
| ISO 7183:2007 | Compressed air dryer specification and testing | ISO |
| Aramco and plant specifications | Supply to Aramco, SABIC affiliates and large plants | Owner |
QIMA reports that SASO published the pressure equipment regulation in the gazette on 16 December 2022 and that only the Arabic version was available when it published its note. Ask your supplier how the regulation applies to the vessels in the dryer you are buying. Our SASO and SABER certificates guide explains the certificate flow.
Air dryers reach Saudi buyers from compressor manufacturers and their distributors in Riyadh, Jeddah and the Eastern Province, from filtration specialists and from traders. Buying the dryer with the compressor from one supplier simplifies service, and an authorised distributor will stock desiccant, filter elements and drain valves.
ListGCC includes makers with dryer ranges: Atlas Copco, Kaeser Kompressoren, Ingersoll Rand, BOGE, CompAir, Sullair, ELGi and Parker. Confirm the dryer model in each current catalogue. Read how to source industrial suppliers in Saudi Arabia, or post your requirement to compare quotes.
The price follows the flow rating at site conditions, the dew point class and the control package. Lead time depends on local stock against factory orders, and on SABER paperwork. Running cost over years often exceeds the purchase price.
When food, pharmaceutical and electronics plants need an oil-free compressor, what Class 0 certification means, how heat affects oil-injected filtration, which oil-free technology fits, and how to test the air.
How to pick a compressed air dryer for Gulf heat and humidity: pressure dew point, refrigerated vs heatless and heated desiccant, correction factors at 45°C, purge losses, drains and condensate.