Solar trackers in Saudi Arabia are the motorised single-axis structures that rotate PV rows to follow the sun on NREP utility plants and large ground-mount systems. This page lists Saudi tracker suppliers and covers tracker types, IEC 62817 qualification listed by SASO, design for sand and wind, local manufacturing and local content in tenders, and what moves price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified solar trackers suppliers who quote for your order directly.
Tell us about solar trackers in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A solar tracker turns a row of PV modules from east in the morning to west in the evening, so the modules collect more energy than on a fixed frame. In the Kingdom they are the standard structure for utility plants within the Saudi solar energy equipment family, from Sudair in Riyadh Province, whose first 450 MW phase uses trackers built for bifacial modules, to plants tendered in later NREP rounds.
Horizontal single-axis trackers dominate. Dual-axis units appear only in test fields, research centres and small demonstration plants.
| Design choice | When Saudi projects use it | What to compare |
|---|---|---|
| Single-axis, 1P (one module in portrait) | Most utility plants on flat desert ground | Posts per MW, stow logic, drive type, bifacial rear shading |
| Single-axis, 2P (two modules in portrait) | Sites aiming to cut pile count | Torque tube design, dynamic wind analysis, installation speed |
| Terrain-following single-axis | Undulating ground in western and northern regions | Allowed slope, grading savings, row-to-row shading |
| Dual-axis | Research and demonstration | Tracking accuracy, cost, service needs |
Where moving parts are not justified, fixed-tilt solar mounting structures for roofs and ground are the alternative. Agree module format with the PV module supplier for Saudi projects early, because tracker row length and clamp zones depend on it.
Saudi trackers face fine dust, sudden gusts in sandstorms and very hot summers. Good designs handle these through stow strategy, sealing of moving parts and heat-rated electronics.
Interior sites in Riyadh, Qassim, Al Jouf, Tabuk and the Eastern Province see fine sand that reaches slew drives, gears and bearings. Ask for ingress ratings, bearing type (sealed and self-lubricating or greased), and the inspection interval. Abrasion of drive seals is a common maintenance item, so price seal kits into the spares list.
Ask how the tracker detects high wind, how fast all rows reach stow, the stow angle and what backup power keeps the system safe if supply is lost. Request site-specific wind tunnel or dynamic analysis, since damage often comes from oscillation rather than peak static load.
Controllers, motors and row batteries must be rated for the ambient temperature they will meet in a Saudi summer, inside their enclosures. Ask for battery chemistry and replacement interval.
IEA PVPS research estimates soiling cuts global PV yield by 3 to 5 percent a year, with arid regions the worst affected. Trackers can park rows flat for waterless cleaning robots, so check that the cleaning machine and tracker control talk to each other.
As of 2026, SASO's Technical Regulation for Solar Photovoltaic Systems lists IEC 62817 as the standard for trackers, and utility tenders add local content and structural requirements. Confirm with SASO whether your tracker components need certificates of conformity and SABER shipment certificates.
| Requirement | Applies to | Authority or body |
|---|---|---|
| IEC 62817 design qualification of solar trackers | Tracker components and complete system | Listed in the SASO PV regulation; tested by accredited labs |
| SABER product and shipment certificates | Regulated imported products | SASO, through approved certification bodies |
| Local content minimum in NREP tenders | Utility-scale projects, including structures | REPDO, calculated under LCGPA rules |
| Structural, pile and corrosion design | Steel members and foundations | Project specification and the owner's engineer |
IEC 62817 tests components and the full tracker but leaves structural and foundation design to local rules and soil data. Plan geotechnical surveys and pile pull-out tests, and specify galvanising for the site's corrosion class. Our guide to SASO and SABER certificates explains the import steps for regulated products.
Trackers in Saudi Arabia come from international tracker manufacturers, increasingly through factories inside the Kingdom. Local production helps projects meet local content minimums and shortens steel logistics.
Ask for the IEC 62817 report, local content certificate if the tender needs one, references in desert climates, spare parts held in the Kingdom and service response times. You can post your solar tracker requirement to compare offers, and our article on sourcing industrial suppliers in Saudi Arabia covers supplier vetting.
Steel is the largest cost component, and engineering, pile tests and factory slots set the delivery schedule.