Electric hoists in Saudi Arabia are the electric chain and wire rope hoists that lift loads on cranes, monorails and fixed beams in plants, workshops and warehouses from Jubail to Jeddah. This page lists Saudi electric hoist suppliers and covers how to pick the hoist type and duty class for inland heat and coastal humidity, the SASO lifting regulation and SABER certificates, and what sets price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified electric hoists suppliers who quote for your order directly.
Tell us about electric hoists in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order electric hoists in two families: electric chain hoists for light and medium loads, and wire rope hoists for heavier loads, longer lifts and production cranes. Both sit within the lifting equipment family for Saudi industry, and most are bought as part of a crane: the hoist and trolley on an overhead travelling crane in a Saudi factory bay, on a gantry or semi-gantry crane in a stockyard, or on a slewing jib crane serving one workstation.
Demand comes from refinery and petrochemical maintenance shops in Jubail, Ras Tanura and Yanbu, the industrial cities of Riyadh, Dammam, Jeddah and Sudair, pump, valve and compressor repair workshops, precast and steel plants supplying the giga-projects, and logistics hubs. The hoist type is set by the load, the lift height and the number of lifts per hour.
| Type | Where Saudi buyers use it | Specification points |
|---|---|---|
| Fixed-suspension electric chain hoist | Plant room lifting points, valve and pump workshops | Capacity, lift, single or two-speed, supply voltage |
| Chain hoist on a trolley | Monorails and single girder cranes in fabrication shops | Beam size, trolley type, headroom, travel speed |
| Wire rope hoist on a single or double girder crab | Steel, precast and heavy assembly bays | Capacity, lift, duty group, reeving, speeds |
| Low-headroom wire rope hoist | Older buildings with limited height under the roof steel | Hook height, girder type, end approach |
| Explosion-protected hoist | Classified areas in Aramco, SABIC and other hydrocarbon plants | Zone, gas group, temperature class, SASOEX evidence, owner approval |
Manual chain blocks and lever hoists are bought separately from chain hoist and winch suppliers. The rigging under the hook, from shackles to chain slings, comes from sling and shackle suppliers in Saudi Arabia and carries its own certificates.
Inland heat cuts into the cooling margin of hoist motors and brakes, sandstorm dust wears chain, rope and seals, and the humid Gulf and Red Sea coasts bring condensation and corrosion. Each is handled in the specification: rated ambient, enclosure, coating and heating, not a larger hoist.
Every hoist duty rating holds only up to a stated air temperature. Demag's DC chain hoist sheet is a typical example: IP55, class F insulation, 60% duty factor and 360 starts per hour, with reliable operation from -20 °C to +45 °C at full duty and versions for up to 60 °C and higher on request. In a steel-clad shed in central Saudi Arabia the air near the crane girder in summer can exceed that, so state the temperature at hoist level and get written confirmation of the rating or the derating.
Ask for the duty group in the system your client uses. Demag summarises FEM 1Am as light to medium, 2m as medium to heavy and 3m as heavy service, while the ASME H classes run from H1 standby use to H5 near-continuous service. FEM groups are calculated from load spectrum and running time and ASME groups from starts and running minutes per hour and mean effective load, so give suppliers both sets of data. A shutdown hoist in a refinery workshop and a hoist on a pipe spool line need different groups at the same capacity.
Ask for anti-condensation heaters in the motor and control panel, sealed pendants and limit switches, a coating system suited to marine air, and stainless or corrosion-protected chain for hoists working outdoors. Fine dust on lubricated chain and rope becomes an abrasive paste, so agree a cleaning and lubrication interval with the supplier.
As of 2026, electric hoists in Saudi Arabia fall under SASO's Technical Regulation for Machinery Safety, Part 3: Lifting Equipment, which lists "electric motor driven pulley tackle and hoists" under HS code 8425 and requires a certificate of conformity through SABER before sale, plus inspection after installation and periodically in service.
| Requirement | Applies to | Authority |
|---|---|---|
| Product certificate (conformity type 1a) and shipment certificate through SABER | Electric hoists and winches under HS 8425 | SASO and its notified bodies |
| Inspection certificate after installation, then periodic examination including after maintenance or modification | Installed hoists and cranes | SASO-approved inspection bodies |
| SASO GSO EN 14492-2 (power-driven hoists) and SASO GSO ISO 4301-1 (classification) | Design and duty classification | SASO, standards listed in Annex 1 of the regulation |
| Wire rope care, inspection and discard to the ISO 4309 series adopted by SASO | Wire rope hoists in service | SASO, Annex 1 |
| SASOEX certificate issued on IECEx or ATEX evidence | Products for potentially explosive atmospheres; confirm with SASO for your hoist model | SASO |
| Arabic labelling and instructions | All products in the regulation's scope | SASO |
SASO's certificates page lists the documents a SASOEX application needs: for IECEx products the certificate of conformity, the test report and the quality assessment report; for ATEX products the ATEX certificate, the manufacturer's declaration and the quality assurance notification. Large owners such as Aramco and SABIC add their own lifting procedures, inspector approvals and vendor lists, so read the project lifting standard before you order. Where a contract gives no examination interval, UK HSE guidance (12 months for lifting equipment, 6 months for accessories) is a common benchmark. The guide to SASO and SABER certificates for industrial equipment walks through registration, and the overhead crane buying guide covers hoist duty on cranes.
Choose a supplier that can register the exact hoist model on SABER, hold spares in the Kingdom and service and recertify the hoist after installation. That usually means the maker's Saudi branch or authorised distributor for production and Ex hoists, and a stockist only for standard chain hoists used for occasional lifts.
Brands supplied to Saudi plants include Konecranes (Finland) and Demag, now part of Konecranes; STAHL CraneSystems for explosion-protected wire rope and chain hoists; Kito electric chain hoists; Columbus McKinnon CM, Yale and Coffing hoists; Verlinde including its explosion-protected range; ABUS; Street Crane; HADEF; LIFTKET; and GIS.
To compare offers from several Saudi suppliers against one datasheet, post your hoist requirement with load, lift, duty and site conditions.
In Saudi Arabia the price of an electric hoist follows capacity, duty group, controls and environment options, plus SABER certification and the post-installation inspection; delivery depends heavily on whether the model already holds a valid certificate.
Standard chain hoists are often available from Saudi stock; wire rope hoists, Ex hoists and special designs are factory orders.
How the PCoC and SCoC work on SABER, who must register, which machinery regulations apply, and the documents to ask your supplier for before shipping.
What to specify when buying an overhead EOT crane in the UAE or Saudi Arabia, from girder type and duty class to heat ratings, third-party inspection and spares.