Rivets and anchors in Saudi Arabia are the fixings that join sheet metal and secure equipment, cladding and services to concrete on plants, towers and warehouses. This page explains blind rivet and anchor types, the approvals and SABER points buyers should check, how Riyadh dryness and Eastern Province or Red Sea salt change the specification, and where Saudi supply comes from.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified rivets & anchors suppliers who quote for your order directly.
Tell us about rivets & anchors in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order two families: blind and structural rivets for joining thin material, and cast-in, mechanical and chemical anchors for fixing to concrete. They belong to the wider industrial fasteners and hardware range in Saudi Arabia, and the use decides the type.
| Product | Typical Saudi application | Key points to state on the order |
|---|---|---|
| Aluminium or steel blind rivet | Panel work, HVAC duct, enclosures, light cladding in Riyadh and Jeddah | Material pair, diameter, grip, head, mandrel retention |
| Stainless blind rivet | Coastal cladding, food and wash-down areas, marine equipment | A2 or A4 body, mandrel material, ISO 15983 where specified |
| Lockbolt or structural blind fastener | Mining trucks, rail, bridges, solar racking | Shear and tension values from the maker, tooling |
| Wedge or sleeve expansion anchor | Plant skids, cable tray and pipe supports on slabs | Size, embedment, cracked concrete rating, spacing |
| Injection mortar with threaded rod or rebar | Retrofit dowels, facade brackets, tower and tank connections | Resin type, hole size, cure time, temperature range |
| Cast-in anchor bolt or J-bolt | Foundations for columns, tanks and rotating machines | Grade, length, thread projection, template |
Tie-back and rock anchors for shoring are a separate product, described under ground anchors, and foundation anchor bolts for steel frames are described with structural bolts and fasteners. Related general fixings are in bolts and nuts.
Saudi sites split into dry inland locations, where ordinary zinc finishes last well, and coastal or sabkha locations in the Eastern Province and along the Red Sea, where salt attacks fixings quickly. Pick material by the exact site, not by the country.
Sabkha ground and saline groundwater are found along the Gulf and Red Sea coasts, and chlorides migrate into foundations and slabs. Anchors set into base slabs there should be stainless, hot dip galvanized or otherwise protected as the engineer specifies, and bare carbon steel rods in a cast-in pocket are a common cause of staining and corrosion. Check the corrosion class stated on the drawings rather than assuming.
Riyadh and Dammam summers push base material and cartridges well above comfortable installation limits. Resin anchors have installation and service temperature ranges in their assessments, and the mechanical fastener assessment document sets a working-life range of minus 40 to plus 80 degrees Celsius. Store cartridges in shade, and ask the supplier for the data sheet limit for your resin.
Aluminium rivets with a steel mandrel are fine inland. On the coast, specify stainless rivets or sealed-end types so that the mandrel stub does not become the first rusting point. ISO 15977 describes aluminium and steel open-end rivets from 2.4 mm to 6.4 mm and ISO 15983 the stainless version from 3 mm to 5 mm.
Rivets and anchors are bought to the project specification, and imports may also need a SABER product certificate when their customs code falls under a SASO technical regulation. As of 2026, a SABER notice brought further codes for metals in construction under the Building Materials Part 1 regulation, including at least one line under heading 7318 for screws and bolts, so check the exact code before each shipment.
| Requirement | Scope | Authority |
|---|---|---|
| SABER PCoC and SCoC | Regulated product codes; PCoC per product, SCoC per shipment | SASO via SABER |
| European Technical Assessment (EAD 330232-01-0601) | Mechanical anchors in cracked and uncracked concrete, seismic C1 and C2 | EOTA and approval bodies |
| ACI 355.2, ACI 355.4 and ACI 318 chapter 17 | Qualification and design of post-installed anchors | American Concrete Institute |
| ISO 15977 and ISO 15983 | Open-end blind rivets in aluminium and stainless | ISO |
| Aramco or SABIC material approval | Fixings on plants under company specifications | Owner |
Standards were checked in October 2026. Our guides on SASO and SABER certificates explain the certificate steps. If the sources disagree on a code or edition, confirm with the certification body or the project engineer.
Buy engineered anchors from the manufacturer or an authorised distributor, and buy general rivets from a stockist if the pack carries the maker marking. The difference matters because an assessment document is tied to a named product, and a look-alike anchor of a different make does not inherit it. Hilti sells anchoring systems with its tools through direct sales, Fischer supplies mechanical anchors and injection mortars through distribution, and Huck supplies structural blind rivets and lockbolts. Ask who holds the SABER certificate and whether stock is cleared in the Kingdom. To compare offers, post your rivets and anchors requirement with sizes and approval documents.
Price follows material, qualification and quantity; lead time follows stock and customs clearance. Stainless and galvanized items cost more than zinc plated ones, and seismic or fire-qualified anchors cost more than basic expansion bolts. Stock sizes ship from Riyadh, Jeddah and Dammam warehouses; special lengths and coatings are imported through Jeddah Islamic Port, King Abdulaziz Port in Dammam or Jubail Commercial Port, so allow for the SCoC. Order matching washers and pins and threaded rods and studs at the same time.