Intumescent fire coatings in Saudi Arabia are reactive paints that expand into a protective char in a fire so structural steel holds its load for a rated period. This page lists Saudi suppliers and covers cellulosic and hydrocarbon products, how film thickness is calculated, the Saudi Building Code, test evidence and plant owner specifications as of 2026, and what sets price and delivery time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified intumescent fire coatings suppliers who quote for your order directly.
Tell us about intumescent fire coatings in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A fact-checked comparison of Jotun and National Paints for Gulf buyers: where each makes paint, their decorative, fire, floor and marine ranges, support and the approvals to ask for.
Intumescent fire coatings are reactive coatings for structural steel that foam up in a fire into an insulating layer, delaying the point at which steel loses strength. In the Kingdom they form part of the range of industrial paints and coatings in Saudi Arabia and are specified on two very different kinds of project: buildings such as the steel-framed offices, malls, stadiums and transport hubs in Riyadh, Jeddah and the giga-projects, and process plants run by Aramco, SABIC and others in Jubail, Yanbu and Ras Tanura.
The fire scenario decides the product. A building fire burns contents and follows the cellulosic standard curve; a plant fire burns hydrocarbons in pools or pressurised jets and reaches high temperatures within minutes.
| Product group | Where it is used in the Kingdom | What to fix in the specification |
|---|---|---|
| Thin-film acrylic, waterborne | Air-conditioned interiors: offices, retail, schools, hospitals | Rating in minutes, dry interior exposure, topcoat colour |
| Thin-film acrylic, solventborne | Fabrication shop coating, semi-open structures | Drying time, durability category, outdoor topcoat |
| Epoxy intumescent, cellulosic | Exposed external steel, long ratings, offsite application | Film build per coat, impact resistance, rating limit of the product |
| Epoxy intumescent, hydrocarbon | Pipe racks, equipment supports and skirts in Eastern Province and Yanbu plants | UL 1709 hours, ISO 22899-1 jet fire, reinforcement mesh, owner approved list |
An intumescent is one layer of a system. The primer underneath, often from the maker's anti-corrosion coatings, and the topcoat, often a polyurethane from its protective coating range, must both be ones the fire assessment includes. Related categories are fire protection systems in Saudi Arabia, fire-rated doors for compartment walls, and structural steel fabrication, where much intumescent is applied before the steel ships to site.
Saudi conditions affect intumescents mostly through exposure and application: inland heat and dust in Riyadh, and humidity and salt on the Gulf and Red Sea coasts. The fire performance comes from the thickness schedule, but the coating has to survive years of service to deliver it.
The manufacturer turns the required rating into a dry film thickness for each member, using the section factor (heated perimeter divided by cross-section area) and the design temperature agreed with the structural engineer. Slender members and hollow sections need more coating. Ask for the member-by-member schedule and the test standard it relies on before you accept a quantity.
European assessments grade durability in categories set by EAD 350402-00-1106, from X for full outdoor exposure, through Y for semi-exposed, to Z1 and Z2 for humid and dry interiors. Waterborne thin films belong indoors. Steel in Jeddah, Dammam, Al Khobar and Jubail that sees humid air, morning condensation or sea spray needs a product assessed for the harsher category and a sealing topcoat. Inland, large day and night temperature swings and dust are the main stresses.
Intumescent is built up in several thick coats, so heat, wind and dust between coats show up as defects. Many fabricators in Riyadh, Dammam and Jeddah coat steel in enclosed shops and protect it during transport, leaving only connections for site work. Record dry film thickness on every member and use third-party coating inspection in Saudi Arabia on major structures.
In Saudi Arabia fire resistance requirements for buildings come from the Saudi Building Code, including the general building code SBC 201 and the Saudi Fire Code SBC 801, while plant fireproofing follows Aramco, SABIC and other owner specifications. The test evidence for the coating itself comes from international fire tests. We reviewed these in October 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| Saudi Building Code SBC 201 and Saudi Fire Code SBC 801 | Fire resistance of building elements and fire safety in buildings | Saudi Building Code National Committee; inspection by accepted bodies listed by SASO |
| Civil defence review | Fire safety of buildings and approval of fire safety works | General Directorate of Civil Defense |
| EN 13381-8:2013 | Reactive coatings on steel beams and columns under the EN 1363-1 standard curve | CEN, through European Technical Assessments |
| BS 476 Parts 20 and 21 | Fire resistance of protected steel, often third-party certified | BSI test methods |
| UL 1709 and ISO 22899-1 | Hydrocarbon pool fire and jet fire protection of steel | UL Solutions and ISO |
| Aramco and SABIC fireproofing standards, approved lists | Passive fire protection at their facilities | The plant owner |
| SASO Technical Regulation for Paints and Varnishes | Paints for buildings and public facilities; scope for intumescents to be confirmed | SASO, certificates via SABER |
SASO's list of accepted inspection bodies, updated 6 September 2026, names bodies accepted for SBC 201 and SBC 801 inspection, which is a practical way to see who checks building work. EN 13381-8 applies directly to I, H and hollow sections and does not cover beams with web openings, which need a separate assessment. Whether a given intumescent needs a SASO certificate under the paints regulation depends on its scope, so ask the importer for the certificate or a written scope statement, and confirm civil defence requirements for your building, as of 2026. The SASO and SABER certificate guide walks through import certification.
Intumescent coatings reach Saudi projects through manufacturers' Saudi companies and their authorised distributors and applicators. Owners and consultants normally name approved products, so the real choice is between approved systems and the applicators qualified to apply them.
Brands with fire protection coatings include Jotun (SteelMaster thin films and Jotachar hydrocarbon epoxies), Hempel (Hempafire XTR 100 for pool and jet fires), PPG (Steelguard products from 30 minutes up to 4 hours of cellulosic protection), Sherwin-Williams (the Firetex range) and Promat, whose fire boards are the usual alternative when a coating would be too thick.
When you compare offers, ask for:
Applicators appear under painting and coating contractors in Saudi Arabia. To receive comparable prices, post your intumescent coating requirement with member lists, ratings, exposure and owner specification. Our guide to sourcing industrial suppliers explains how to verify an agent.
Intumescent cost in Saudi Arabia follows film thickness, which rises with the fire rating and with slender steel sections, plus the fire type and exposure. Price per litre says little; compare price per tonne or per member at the scheduled thickness.
Standard thin films are usually held in Saudi warehouses. Thickness calculations wait for steel drawings, and hydrocarbon epoxies, special ratings or products arriving through King Abdulaziz Port or Jeddah Islamic Port without certificates take longer.
How to specify intumescent fire protection for steel in the Gulf: product types, fire curves and test standards, thickness schedules, inspection, and civil defence and SBC questions to ask.
Which paint and coating brands make paint in the UAE and Saudi Arabia, how to specify decorative, epoxy, anti-corrosion and fire coatings, and the MoIAT, Dubai and SASO rules that apply.