Industrial rubber sheets in Saudi Arabia are rolls and cut panels of SBR, NBR, EPDM, neoprene, silicone and fluoroelastomer used for gaskets, wear liners, pads and seals in refineries, mines, water plants and factories. This page covers compound choice, SFDA and iktva checks as of 2026, buying by the roll or cut part, and what drives price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified industrial rubber sheets suppliers who quote for your order directly.
Tell us about industrial rubber sheets in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Rubber sheet is vulcanised elastomer supplied flat, in rolls or panels, in thicknesses from thin gasket stock to heavy wear plate. Saudi buyers include Aramco contractors, petrochemical shutdown teams, mines, desalination plants and workshops, who turn it into gaskets, liners, pads and seals. It belongs with the other lines described under industrial rubber products.
The polymer decides what the sheet will survive. Qualitative guidance from one hose maker puts the divide plainly: EPDM resists ozone and ultraviolet ageing and is used for heat and chemicals, but it absorbs oil, while NBR is well suited to oils and fuels but ages faster outdoors. Other compounds fill gaps around those two.
| Compound | Where Saudi buyers use it | Limits |
|---|---|---|
| SBR | General sheet, mats, low cost water and air gaskets | Not for oil or long outdoor exposure |
| NBR (nitrile) | Fuel, lube oil and hydraulic fluid gaskets | Ages faster in sun and ozone |
| EPDM | Cooling and process water, outdoor seals and covers | Swells in mineral oil and fuel |
| Neoprene | Weather and moderate oil exposure, marine | Compromise compound; check the fluid |
| Silicone | Food, pharma, hot air and clean areas | Weak in tear and abrasion |
| FKM | Hot hydrocarbons and aggressive chemicals in refineries | Highest cost; verify compound against the fluid |
| Natural rubber and wear sheet | Chute, hopper and slurry pump liners in mines and cement plants | Not for oil; specify hardness and thickness |
Ask for the Shore A hardness, thickness tolerance, colour, insertion (fabric cloth layers or plain) and any approvals. For the downstream gasket, see rubber seals and gaskets and gasket sheets and spiral wound gaskets.
Hot inland summers, desert dust and coastal humidity together are hard on rubber. Where in the Kingdom the sheet will work matters as much as what fluid it touches.
Rubber ages faster as temperature rises, and ozone and sunlight crack susceptible compounds such as NBR and SBR. In Riyadh and the interior, summer surface temperatures on outdoor installations are high enough that cheap, unprotected sheet hardens within a few seasons. Specify EPDM or a protected compound for exposed use, and cover stock rolls.
Phosphate, bauxite, limestone and aggregate handling wears steel quickly. A thick rubber liner on chutes, hoppers and skirting absorbs impact and extends the life of the plate behind it. Bonded or bolted rubber liners and the work of fitting them are covered under rubber lining services, and the belts that feed those chutes are on our page for conveyor belts.
Refineries and gas plants ask for FKM or special nitrile compounds with documented fluid resistance. Always check the compound against the process fluid at operating temperature, and ask the supplier for compatibility data, not a verbal assurance. Sheet used on Aramco work generally follows the project material specification.
Raw rubber sheet has no single Saudi certificate as of 2026. Buyers specify the compound by an international classification, then add the approvals that match the use: food, drinking water or an owner's vendor list.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Material classification, ASTM D2000 or BS 2752 style callouts | General sheet specified by type and class | Standard named on the order and the supplier datasheet |
| 21 CFR 177.2600 | Rubber articles for repeated food contact | US Food and Drug Administration rule used as reference by food plants |
| GSO 2231/2012 and SFDA oversight | Food contact materials and traceability | SFDA, with GCC standard adopted in Saudi Arabia per a published review |
| WRAS approval (BS 6920 tests) | Rubber and gaskets in drinking water contact | Water Regulations Advisory Scheme, often requested by consultants |
| Aramco supplier registration and iktva | Sheet and gaskets supplied to Aramco projects | Saudi Aramco |
The US rule sets extractive limits for rubber surfaces in contact with aqueous and fatty foods, and it explains why a food plant needs a compound-specific declaration. A GCC legal review states that rubber has no dedicated GCC food standard and that SFDA oversees food contact materials. The review is dated, so confirm present rules with SFDA. For certificate routes on regulated finished goods, read the guide to SASO and SABER certificates for industrial equipment in Saudi Arabia. Aramco describes iktva as a programme to retain 75 percent of its procurement spend in the Kingdom.
Most Saudi plants cut gaskets from sheet in the workshop, either with a hand punch and scissors for small items or through a supplier's die or water jet service for repeatable shapes. A cleanly cut edge matters, because a ragged inside diameter can shed pieces into the line and a rough outside edge starts tears. Cut the gasket to the flange face, not the bolt circle, so it does not extrude into the bolt holes under load.
Fit the gasket on clean, dry faces without sealant unless the maker allows it. Tighten bolts in a cross pattern in several stages, and recheck after the system has warmed up if the procedure calls for it. A rubber gasket that is overtightened squeezes out, thins and loses its sealing force, which is the usual cause of a joint that weeps after a few weeks.
Store sheet and cut gaskets flat, in the original wrap, in a closed room away from direct sun, heaters, electric motors and solvents. In Saudi summers, a hot container or yard can age rubber stock before it is used. Rotate stock by date, and mark the compound on every cut piece, because a bin of unlabeled black gaskets is a common cause of the wrong material going on a fuel line.
Stockists in the main cities suit routine maintenance, while manufacturers and compounders suit large wear lining orders and certificate-heavy work. Many buyers use both: a local stockist for emergencies and a manufacturer for planned shutdowns.
Rubber and gasket stockists operate in Dammam, Jubail, Jeddah and Riyadh industrial areas. To compare quotations from several suppliers at once, post your requirement with fluid, temperature, thickness and quantity.
Price depends on polymer, thickness, width and any special property such as flame retardance or an approval. SBR is the lowest cost, EPDM and neoprene are mid range, silicone and FKM cost the most. Fabric insertion and food or water grades add cost, and cut parts add cutting labour.
Lead time depends on whether the compound and width are held in stock. Common sheet is available in the main cities, while special compounds, large rolls and certified sheet are made to order and shipped to Jeddah Islamic Port or King Abdulaziz Port in Dammam. Large orders for mine or plant lining need time for installation planning as well as delivery. Related rubber lines include rubber hoses and rubber mounts and vibration dampers.