Guardrails and barriers in Saudi Arabia are the steel, concrete and cable restraint systems that keep vehicles off hazards and out of opposing lanes on the Kingdom's highways, bridges and city roads, plus the temporary barriers used in work zones. This page lists Saudi suppliers and covers system types, GSO EN 1317 test classes, the Saudi Roads Code as of 2026, desert and coastal conditions, and what moves price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified guardrails & barriers suppliers who quote for your order directly.
Tell us about guardrails & barriers in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi roads use three families of permanent restraint: flexible wire rope fences, semi-rigid steel beam guardrails and rigid concrete barriers, plus crash cushions at ends and temporary barriers in work zones. They are the roadside safety line within road construction supplies in Saudi Arabia, bought by contractors on Roads General Authority (RGA), Ministry of Transport and municipal contracts, by giga-project developers, and by operators of roads in Jubail, Yanbu and the other industrial cities.
The scale is significant. In August 2025 the Ministry of Transport's road safety director told Okaz that the programme had installed about 154.7 km of concrete barriers and 120.7 km of metal barriers, alongside other measures such as warning rumble treatments and road studs, as part of a strategy to cut road deaths to under 5 per 100,000 people by 2030.
| System | Where it suits Saudi roads | What to check |
|---|---|---|
| Wire rope barrier | Wide medians on long intercity highways | Working width, rope tension, how quickly damaged runs can be repaired on remote routes |
| Steel W-beam or thrie-beam guardrail | Verges, embankments, curves, urban arterials | Containment level, post type in sand or rock, galvanising, terminals |
| Concrete barrier | Narrow medians in Riyadh, Jeddah and Dammam, bridge approaches | Profile, containment, sand and water drainage, emergency crossover gates |
| Bridge and viaduct parapets | Flyovers, interchanges, wadi crossings | Containment level, deck anchorage, pedestrian needs |
| Crash cushions and end terminals | Exit gores, barrier ends, toll and sign gantry supports | Test level for the speed, reusable or sacrificial design |
| Temporary barriers | Diversions, lane closures, event and pilgrim routes | Tested class for the speed, ballast, joining method |
Precast concrete barrier units are also listed with precast concrete product suppliers. On most contracts the barrier package is delivered with road marking materials and cat's eyes and traffic signs and overhead gantries, after the asphalt wearing course is complete. Cones, site fencing and pedestrian barriers are under safety signage and site barriers.
Choose by the hazard and the space behind the barrier first, then by traffic mix and maintenance access. A barrier is only justified where a hazard inside the clear zone cannot be removed, moved or made forgiving.
Flexible systems deflect more, which lowers the load on occupants but needs space. Wire rope suits wide desert medians; on narrow urban medians a semi-rigid or concrete barrier with a small working width class is the realistic choice.
Truck share is high on freight corridors linking Riyadh, Dammam, Jubail and the Red Sea ports. Where a crossover by a bus or truck would be catastrophic, such as medians on high-speed divided roads, bridge edges and next to rail or hazardous plant, specifiers move to higher containment classes.
Windblown sand builds up against concrete barriers and can change the effective barrier height or bury rope anchors, so plan clearance. Steel posts driven into rocky ground may need drilled sockets. On remote routes, the time to repair a damaged wire rope run matters, because a slack rope gives little protection.
Along the Gulf and Red Sea coasts, and near industrial plants in Jubail and Yanbu, specify hot-dip galvanising to ISO 1461 or ASTM A123 for beams, posts and fixings. The American Galvanizers Association notes A123 generally requires more coating thickness than ISO 1461 on most steel. Galvanising capacity is listed under hot-dip galvanizing services.
As of 2026, Saudi road owners work from the Saudi Roads Code, launched by the RGA in May 2024 with 25 codes that include traffic engineering and road safety, and the GSO adoption of EN 1317 gives a Gulf standard for testing barriers. The project specification decides which test standard the product must meet.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Saudi Roads Code | Road design, road safety and maintenance, including roadside safety | Roads General Authority |
| GSO EN 1317-1 and EN 1317-2 (approved 12 May 2022) | Test criteria and performance classes for safety barriers and vehicle parapets | GCC Standardization Organization |
| AASHTO MASH test levels | US-tested barriers, terminals and crash cushions, where specified | AASHTO |
| ISO 1461 or ASTM A123 | Galvanised steel components | ISO, ASTM |
| SABER conformity for imports | Imported products covered by SASO technical regulations | SASO; confirm whether barrier components are regulated |
EN 1317 grades a system by containment level (N classes for cars, H1 to H4b for heavier vehicles), working width (W1 at 0.6 m or less up to W8 at 3.5 m or less) and impact severity (A, B or C). The European Union Road Federation points out that the standard does not choose the class: the road owner sets the minimum for each location. Never mix a MASH test level and an EN 1317 class in the same comparison. For imported barrier components, our guide to SASO and SABER certificates explains customs conformity.
Permanent steel guardrail comes from roll-forming manufacturers and installers who hold the crash test reports for their systems; concrete barriers come from precast factories or slip-form contractors; crash cushions and terminals are often imported to order through agents.
For work zones and sites, Melba Swintex water-filled barriers and pedestrian guardrails and Oxford Plastics temporary road barriers cover channelising and pedestrian separation, and A-SAFE polymer barriers for warehouses and logistics yards protect people from forklifts and trucks off the public road.
Post your barrier requirement with lengths, containment class, terminals and the city to receive comparable offers. Our supplier vetting guide lists the documents to request.
Steel and zinc prices, containment class, the number of terminals, cushions and transitions, and site access drive cost. Standard beam guardrail is often made in the Kingdom with short lead times; tested parapets and crash cushions can take longer if imported.