Plastic extrusion lines in Saudi Arabia melt polyethylene, polypropylene or PVC in a screw extruder and form it into film, pipe, profile or sheet. This page shows which line suits each product, how heat and 60 Hz power affect the machine, which safety standard and SASO rules apply as of 2026, and how to compare suppliers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified extrusion lines suppliers who quote for your order directly.
Tell us about extrusion lines in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
The product decides the line. Blown film lines make sacks, liners, stretch and shrink film; pipe lines make water, irrigation and duct pipe; profile lines make trunking and window profile; sheet lines feed thermoformers. Within plastic processing machinery, extrusion serves Saudi construction, agriculture and packaging buyers. It is a different family from food extrusion equipment.
| Line | Products for the Saudi market | Resin | Key specification |
|---|---|---|---|
| Blown film | Heavy-duty sacks, agricultural film, liners, shrink and stretch film | LDPE, LLDPE, HDPE | Die size, layers, width, kg per hour, dosing |
| Cast film and sheet | Barrier and packaging film, sheet for trays and cups | PP, PET, PS | Die width, chill roll, thickness range |
| Pipe | Irrigation, water, sewer and duct pipe | HDPE, PP, PVC | Diameter range, screw type, vacuum tank, haul-off |
| Profile | PVC trunking, window profile, edge strip | PVC, PE | Calibrator, cooling length, co-extrusion |
Output is sold as HDPE pipes, PVC pipes and fittings, PP-R pipes or plastic sheets and films. Dies belong to mold and die making, scrap goes to plastic recycling machines, and sheet goes on to thermoforming machines.
Saudi film plants tend to buy multilayer blown film lines with printing and bag or sack conversion alongside. Windmöller & Hölscher reports that the Al Jawad group, with units in Saudi Arabia and the UAE, installed a NOVOFLEX II flexographic press and was preparing an OPTIMEX II blown film line, and it reports an OPTIMEX II at Hotpack with a maximum film width of 2600 mm and output of 800 kg per hour. Treat these as examples of scale rather than a norm. A smaller plant that makes agricultural film or refuse bags will often run a three-layer line with lower output.
Ask every supplier for output at your thickness and resin blend, whether the line has gravimetric dosing and automatic gauge control, and how fast it changes format. Long runs of sacks favour a stable, high-output line; short runs favour fast changeover.
In the Kingdom, three practical limits apply: cooling capacity in summer, resin cleanliness, and power frequency. A line rated in a cool European hall may not hold the same output in a Riyadh or Dammam shed at summer peak without a correctly sized cooling system.
The Saudi grid runs at 60 Hz, and the wider GCC grid operates at 50 Hz according to the GCC Interconnection Authority, so motors, drives and heater control on an imported line need to be specified for 60 Hz. Size process chillers and cooling towers for peak summer temperature and ask what water temperature the rated output assumes.
Dust from the central and eastern regions contaminates film and sheet unless resin and regrind are kept in closed silos and conveyors. Humidity on the Red Sea and Gulf coasts adds moisture to hygroscopic resins and recycled flake. See plastic raw materials and masterbatch and additives for the resin side.
Extruders are specified against EN 1114-1 for machine safety, imported machines go through SABER, and film products are subject to the SASO degradable plastics regulation. As of 2026 the applicable SASO regulation for the machine depends on its classification and HS code, so confirm it with the certifier.
| Requirement | Applies to | Authority |
|---|---|---|
| EN 1114-1:2011 safety requirements for extruders | Screw extruders in plastics and rubber lines | CEN, written into the contract |
| SABER product registration and shipment certificate | Imported machines, through the importer of record | SASO |
| SASO technical regulation for degradable plastic products | Disposable PE and PP products of 250 microns or less, imported or made locally | SASO |
| Product certification for pipes and potable water products | Pipe output, by product | SASO, by product |
Intertek reported in 2017 that SASO enforces the rule for PE and PP disposable products of 250 microns or less, that such products must be oxo-biodegradable and carry the SASO logo, and that it covers locally made goods as well as imports. Product lists have been revised since, so confirm the current scope. A film line making thin disposable bags must dose the additive accurately. The SASO and SABER guide for industrial equipment explains the technical file for the machine itself.
Lines come through offices and agents of European builders, Asian manufacturers, and used-machine dealers. Film line builders on this site:
Pipe, profile and sheet lines come through agents of other builders. Printing on the film is covered under printing and labeling machinery.
Quote the same scope from every supplier: extruder, die, cooling, haul-off, winder or cutter, dosing, controls, 60 Hz electrical design, installation and training. Ask for a test run with your resin, local references, spare parts stock in Riyadh, Jeddah or Dammam, and the agency letter. The guide to sourcing industrial suppliers explains how to verify commercial registration and agency rights, and you can post your requirement for comparable quotes.
Price follows extruder size, layers and downstream equipment; lead time follows build to order, die making, SABER and shipping.