Christmas trees in Saudi Arabia are the valve assemblies fitted above oil and gas wellheads, not festive decorations. Operators such as Saudi Aramco specify them to API Spec 6A and their own approved vendor lists. This page covers tree configurations, how pressure, sour gas and duty change the choice, standards, API licence checks, suppliers and what moves price and delivery in the Kingdom.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified christmas trees suppliers who quote for your order directly.
Tell us about christmas trees in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A Christmas tree is the valve assembly fitted above the wellhead that lets a Saudi operator open, throttle, test and shut in a producing or injection well. The term is oilfield slang and has no connection with seasonal decorations, though search engines often mix the two. In the Kingdom, trees are bought mostly by Saudi Aramco and its contractors for onshore fields, causeway and offshore platforms, and by a smaller group of independent and joint operating companies. This page sits inside wellhead equipment for Saudi wells, and it deals with the tree as an assembly. The valve level detail is in wellhead valves for Saudi Arabia.
Think of the tree as a stack with a clear order of operations. The master valves at the base isolate the well. The wing valves above them route flow to the flowline or let fluid be pumped in. A swab valve and cap at the top allow tools to enter the well under pressure. Hydraulic actuation on selected valves allows closure from a safe distance, and a pressure sensor on the tree reports to the control room.
| Configuration | Where it appears in Saudi Arabia | Selection points |
|---|---|---|
| Manual surface tree | Low pressure oil wells on mature onshore fields, water injectors | Valve count, flange class, hand wheel or lever, gauge ports |
| Hydraulically actuated surface tree | Gas wells, high pressure and sour wells, wells near people or roads | Fail-closed actuators, control panel, remote shutdown link |
| Solid block tree | Wells where height, leak paths and weight matter | Forged body, bore size, valve cartridges that can be replaced |
| Composite (assembled) tree | Fields with standardised spares and frequent valve changes | Flange compatibility, interchangeability with existing valves |
| Subsea tree | Offshore developments with seabed wells | Vertical or horizontal type, control interface, API Spec 17D |
Choose the tree from the well data sheet, not from the catalogue size. Shut-in pressure, flowing temperature, hydrogen sulphide, carbon dioxide and chlorides, sand and the planned workovers decide the rating, the materials and how many valves are actuated.
The ratings that matter are the working pressure, temperature class, material class, product specification level and performance requirement defined in API Spec 6A. Saudi non-associated gas fields often carry sour or very sour fluid, so material class and sour service marking should be read against the calculated H2S partial pressure on the data sheet. Our wellhead equipment family page explains how to read these ratings, so this section keeps to how they change tree choice: higher levels mean more forged material, more inspection and often a longer queue at the plant.
A tree for stimulation or injection duty sees pumping pressure and surge loads that production trees do not. State on the enquiry whether the tree will be used for fracturing, acidising or water injection, because that affects valve type, seat design and the working pressure you need. Wells that will be worked over often benefit from block trees with easy access for tools, while wells with scale or sand problems need erosion resistant chokes.
Summer ground temperatures in the Eastern Province and the Empty Quarter margins are high enough to cook a hydraulic hose in a season. Outdoor panels, tubing and gauges should be specified for direct sun and salt-laden air at coastal fields, and stem covers keep blown sand out of actuators. These are protective details more than design drivers, but they decide whether the tree is still working at the next shutdown.
Trees for Saudi wells are bought to API Spec 6A, equivalent to ISO 10423, and to the operator's own engineering standards and approved vendor lists. As of 2026, a tree is a project item and is not normally covered by consumer-style product certificates. Check with the operator whether the SASO SABER route applies to any accessory part you import, and read our guide to SASO and SABER certificates for industrial equipment before shipping.
| Document | Applies to | Who sets it |
|---|---|---|
| API Spec 6A / ISO 10423 | Surface wellhead and tree equipment | API, referenced by operator specifications |
| API Spec 17D | Subsea trees and tubing hangers | API, for offshore projects |
| API Spec Q1 and Monogram licence | Manufacturing quality system and product marking | API, with a public directory of licensees |
| Operator approved manufacturer list and material specifications | Saudi Aramco and other operators | The operator, usually in the purchase order |
| Local content scoring | Tenders with in-Kingdom value targets | The operator and national localisation programmes |
The API Monogram is described by API as a voluntary licensing programme for manufacturers whose quality system meets API Spec Q1, and the mark may be applied only to new conforming product made at the licensed facility. A licence number on the nameplate that does not appear in API's directory, or a Monogram on refurbished equipment, is a reason to stop the receipt inspection.
Saudi Christmas trees are supplied by the global wellhead makers through their Dammam, Dhahran and Jubail service bases, with local assembly, test and repair for standard designs. Operators usually standardise on one manufacturer per field, because the hanger profile, seals and actuators must match the existing wellhead.
Buy new trees and any actuated valve from the maker or its approved Saudi service centre. Use a stockist only for small accessories and spares that the operator allows from open stock. Wells that sit in the same completion programme usually also need casing and tubing and, during drilling, blowout preventers. When you compare quotes, ask each bidder for the API licence number of the plant, the repair level of any refurbished tree and the local test and service capability. Post your requirement to receive quotes with a common data sheet.
Lead time on a Saudi tree depends first on whether the design and size are held in the Kingdom. A standard manual tree can leave a regional stock position within weeks. An engineered block tree, an actuated tree with a control panel or a sour service tree in a special material goes into the manufacturer's production line and then through factory acceptance tests and document review.
Prices are not published here. Send the full data sheet, the intended duty and the delivery site with the first enquiry, and ask for a delivery schedule that separates manufacturing, testing and documents. For the wider range of items on a completion, see upstream oil and gas equipment in Saudi Arabia.