Laboratory centrifuges in Saudi Arabia are used by hospital labs and blood banks, university research centres, pharmaceutical QC and refinery labs to separate samples at controlled g-force and temperature. This page covers the types and rotor choices, the RCF calculation, which SFDA, SASO and safety standard requirements apply as of 2026, how Saudi heat and remote sites affect them, and how to compare Saudi suppliers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified centrifuges suppliers who quote for your order directly.
Tell us about centrifuges in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi labs use centrifuges from palm-sized micro units to floor-standing machines, chosen by tube format, volume, speed and temperature. They sit within the laboratory equipment family in Saudi Arabia; this page goes further into rotors, safety and service, which decide whether a centrifuge stays in use.
| Centrifuge type | Where it is used in Saudi Arabia | What to specify |
|---|---|---|
| Clinical benchtop | Hospital and polyclinic labs separating serum and plasma, urine sediment | Swing-out rotor for primary blood tubes, adapters per tube brand, short programmes, quiet running |
| Blood bank and large capacity | Blood banks preparing components, high-volume hospital labs | Floor-standing, refrigerated, bag cups and balancing system, temperature control during the run |
| Micro-centrifuge | Genomics and molecular diagnostics, university labs | RCF in small tubes, PCR strip rotors, refrigerated version for enzyme work |
| Refrigerated research | Biotechnology, pharmaceutical QC and research centres in Riyadh, Jeddah and Thuwal | Interchangeable rotors, plate carriers, sealed buckets, cooling performance at rated ambient |
| Heated petroleum centrifuge | Refinery, terminal and third-party inspection labs in Jubail, Ras Tanura, Yanbu and Rabigh | Heating to the method temperature, cone-tube rotor, lab hazardous area rating |
Refinery and terminal labs usually test water and sediment by ASTM D4007 (crude oil, centrifuge method) and ASTM D1796 (fuel oils, centrifuge method). Specify the method and edition in the purchase order so the supplier confirms the centrifuge meets its speed, heating and tube requirements.
Relative centrifugal force (RCF) is the force on the sample expressed as a multiple of gravity, and it is what methods and tube makers specify. It depends on both speed and radius: RCF = 1.118 x 10 to the power -5 x radius in cm x rpm squared.
So at 3,000 rpm a rotor with a 20 cm radius gives about 2,010 x g, while one with a 10 cm radius gives about 1,010 x g. Two quotes showing the same maximum rpm can therefore deliver very different separation. Ask each supplier for the maximum RCF of each rotor and adapter quoted, and check it against the rating of your tubes under lab consumables and reagents. Molecular labs should also match micro-centrifuge rotors to the tubes and strips used on their PCR instruments, and labs handling solvents in sample preparation should keep that work in a tested fume hood, not beside the centrifuge.
As of 2026, a centrifuge labelled for in vitro diagnostic use is a medical device and needs an SFDA Medical Device Marketing Authorization (MDMA); a general lab centrifuge is not, but as electrical equipment it may need SASO conformity through SABER. Both are built to the IEC 61010-2-020 safety standard.
| Requirement | Applies to | Authority |
|---|---|---|
| Medical Device Marketing Authorization (MDMA) and an authorised representative licence | Centrifuges labelled for IVD use in hospital and blood bank labs | Saudi Food and Drug Authority (SFDA) |
| SASO technical regulations and SABER certificates, where a regulation applies | Electrical lab equipment that is not a medical device | SASO |
| IEC 61010-2-020:2026 with IEC 61010-1 | Electrically powered laboratory centrifuges | IEC; replaces the 2016 edition |
| Aerosol containment certification of rotors and lids | Work with infectious or high-risk samples | Maker test reports; some certified at Porton Down (UK) |
| ISO/IEC 17025 and ISO 15189 | Accredited testing and medical labs: speed and temperature verification | Saudi Accreditation Center (SAAC) |
SFDA's MDMA requirements apply to manufacturers and their authorised representatives in the Kingdom, so the Saudi distributor of a diagnostic centrifuge should be able to show the MDMA for the exact model. Non-medical electrical items are cleared on SASO certificates; the guide to SASO and SABER certificates explains the process. For biological work, Yale EHS guidance is that sealed buckets and aerosol-tight rotors are loaded and opened inside a biosafety cabinet when samples are high risk. For accredited methods, plan annual checks of speed and temperature with tools from calibration equipment suppliers in Saudi Arabia.
High summer temperatures limit refrigerated centrifuges, and distance from service centres turns a broken rotor or lid lock into weeks of downtime for plant and remote labs.
Saudi labs buy from scientific distributors with service teams in Riyadh, Jeddah and Dammam, while government hospital labs and blood banks often buy through NUPCO tenders. Choose on rotor availability, regulatory paperwork and engineer coverage.
Makers carried here include Cryste (refrigerated high-speed benchtop, multipurpose and micro centrifuges with swing-out and angle rotors), BIOBASE (mini, low-speed and high-speed centrifuges) and Infitek (benchtop and refrigerated centrifuges). Hospital buyers comparing whole lab packages may also look at diagnostic equipment suppliers that bundle centrifuges with analysers. Ask each bidder for the MDMA or SABER certificate that applies, the rotor and adapter list with part numbers and RCF, locally held spares, and the cost of preventive maintenance after warranty. To compare offers, post your requirement with sample types and tube formats.
The rotor set, refrigeration and certification add more to the price than the base unit. Sealed buckets, plate carriers, extra adapters and certified aerosol-tight lids each add cost, and a heated petroleum centrifuge or a floor-standing blood bank unit sits at the top of the range.
Stocked micro and benchtop models can arrive quickly from Saudi distributors. Floor-standing units and non-standard rotors are factory orders shipped through Jeddah or Dammam. A diagnostic model without an MDMA, or an electrical item without its SABER certificate, will not clear customs, so check regulatory status before placing the order.