Aluminium sheets and plates in Saudi Arabia are flat rolled aluminium products, plain, chequered or embossed, bought for cladding, ducting, enclosures, transport and machined parts. This page explains which alloys and tempers suit which job, how sheet differs from plate, how Saudi rolling capacity and imports fit together, what certificates to ask for as of 2026, and what drives price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified aluminum sheets & plates suppliers who quote for your order directly.
Tell us about aluminum sheets & plates in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order flat aluminium by alloy, temper, thickness and size, as plain sheet, chequered plate, embossed sheet and heavier plate. The product sits inside the aluminium products category for Saudi Arabia, whose parent page covers alloy and temper naming. Here the focus is the flat product and how to buy it.
| Alloy family | Character | Typical Saudi use |
|---|---|---|
| 1xxx (1100) | Soft, formable, low strength | Flashing, reflectors, trim, electrical and chemical equipment liners |
| 3xxx (3003) | Formable, moderate strength | HVAC duct jackets, housings, roofing accessories |
| 5xxx (5005, 5052, 5083, 5754) | Magnesium alloys, salt resistant, weldable | Facades, tanks, signage, marine and coastal structures |
| 6xxx (6082) | Heat-treatable, strong | Machined parts, frames, structural plate |
| 7xxx (7075) | Very high strength, poor corrosion resistance | Tooling and high-load machined parts |
A Dubai stockist lists 1100, 3003, 5005, 5052, 5083, 6082 and 7075 alongside chequered plate, stucco embossed sheet and DNV-certified marine sheet, which is a useful reference list when you write an enquiry for a Saudi supplier. Neighbouring products are on aluminium coils, aluminium bars and rods and aluminium extrusions. Painted laminate panels are covered under aluminium composite panels, and roll-formed sheeting under metal roofing sheets.
Saudi Arabia has an integrated aluminium complex, but public pages do not say which flat products it sells. Ma'aden's aluminium business describes smelting and rolling aluminium at its Ras Al Khair facility, states production of over 1 million tons per year of premium-grade aluminium, and names the automotive, aerospace and renewable energy sectors among its markets. Its page does not list sheet, plate or can sheet as products, so a general sheet buyer should not assume a Saudi source and should ask suppliers where the rolled material is made.
Most general-purpose sheet and plate in Saudi service centres in Riyadh, Jeddah and Dammam is imported, through King Abdulaziz Port, Jeddah Islamic Port and Jubail. Ask each supplier for the mill, the cast number and the cut-to-size services on offer.
Sheet is thinner flat aluminium, plate is thicker, and chequered plate carries a raised tread on one face. The dividing thickness depends on the standard, so state the thickness in millimetres. EN 485 treats sheet, strip and plate as one family; Part 2 covers mechanical properties of wrought aluminium and aluminium alloy sheet, strip and plate for general engineering and excludes reroll stock, corrugated or painted sheet, and aerospace and can stock. The GSO adoption, GSO EN 485-2:2016+A1:2024, was approved on 25 April 2024. Chemical limits are in EN 573-3 and tempers in EN 515.
Plain sheet takes paint, powder coating or anodising. Embossed stucco sheet reduces glare and hides scratches, a benefit in strong sun. Chequered plate gives grip for platforms, ramps and truck floors. Standard sheet sizes quoted by a Gulf stockist are 1220 by 2440 mm, 1250 by 2500 mm and 1500 by 3000 mm.
Heat, UV, dust and coastal humidity decide alloy, finish and gauge. On the Red Sea at Jeddah and Yanbu and on the Gulf coast at Jubail and Dammam, magnesium alloys such as 5052 and 5083 resist salt better than 1100 or 3003. Inland at Riyadh, dust and temperature swings matter more, so thicker gauge and stiffeners help avoid oil-canning on wide panels. Stockist guidance for the distance from the sea at which marine alloys are needed varies between 1 km and 2 km, so fix the exposure class in the specification.
For exterior facades, choose outdoor architectural powders designed to resist UV fading, or anodising on clean stock such as 5005, and keep protective film on until installation. Leave expansion gaps at joints.
As of 2026, flat aluminium is bought against the mill test certificate and the product standard in the specification (EN 485, ASTM or GSO equivalents), and no Saudi rule published specifically for aluminium sheet was found. SASO's Building Materials Part 1 notice names steel products and does not list aluminium sheet, so confirm the SABER position of your HS code with SASO or an accredited body.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Mill test certificate with cast number | Structural, marine and project sheet and plate | Specification, inspector |
| EN 485 or GSO EN 485-2 | General engineering sheet, strip and plate | Purchase specification |
| SABER product and shipment certificates | Regulated products, by HS code | SASO via accredited bodies |
| Marine class certificate | Shipbuilding and offshore plate | Classification society |
| Facade finish standard | Anodised and coated exterior sheet | Facade specification |
The SASO and SABER certificate guide shows how certificates are issued for an import.
Flat aluminium reaches Saudi buyers through importers, distributors and service centres that shear, route and cut to size. There are no aluminium sheet and plate brands in our directory with a verified rolled-product range, so rely on mill names and certificates in the quotation. Ask for the mill of origin, cast number, temper, film type and cutting services, and compare on how quickly exact blanks can be delivered.
For fabrication, see sheet metal fabrication. The sourcing guide for the Gulf explains how to vet a distributor, and you can post your requirement with alloy, temper, thickness and quantity.
Price follows the London Metal Exchange aluminium price plus a conversion premium, then alloy, temper, thickness, size, finish and cutting; lead time follows stock. Common alloys in standard sizes are usually in Saudi yards. Marine and heat-treatable plate, thick plate and special tempers are imported to order, with sea freight and SABER clearance on top.
Cutting, film and finishing add days. Compare delivered prices per usable kilogram and confirm what is on the ground in the Kingdom.