Aluminium extrusions in Saudi Arabia are profiles pressed from aluminium billet for facades, windows, doors, solar structures, transport and industrial frames. This page covers alloys, tempers and finishes, how Saudi metal supply and SASO building-material rules affect orders, and how to compare extruders, importers and fabricators.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified aluminum extrusions suppliers who quote for your order directly.
Tell us about aluminum extrusions in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
How to specify powder coating for aluminium and steel in the Gulf: powder chemistries, QUALICOAT and AAMA, licensed coaters in the UAE and Saudi Arabia, colour control and a coater audit checklist.
Aluminium extrusions in Saudi Arabia are constant cross-section profiles pressed from heated billet, sold as architectural systems, industrial sections and general shapes. They are one form in the aluminium products category for Saudi Arabia, with aluminium bars and rods, aluminium coils and aluminium sheets and plates. Saudi demand follows housing, hospitality and giga-project construction, plus solar farms, transport and electrical enclosures.
| Type | Saudi application | Details to state |
|---|---|---|
| Window and door systems | Residential towers, villas, hotels, hospitals | System profile, thermal break, finish, alloy and temper |
| Curtain wall and facade | Office towers, malls, airports | Mullion and transom sections, load calculations, coating |
| Industrial sections | Machine frames, enclosures, conveyors | Drawing, tolerance, cut length, machining |
| Solar and structural | Mounting rails and frames | Alloy, temper, corrosion protection |
Saudi Arabia has a domestic aluminium chain. Ma'aden states it smelts and rolls aluminium at its Ras Al Khair facility and produces over 1 million tons a year of aluminium, with bauxite mined at Al Ba'itha. The Ma'aden page does not break that output into billet, sheet and coil, so ask a supplier which product form its metal comes in. Ask any extruder whether its billet is domestic or imported.
For a Saudi extrusion order, ask whether the billet is domestic or imported, because Gulf supply has been uneven in 2026 after the Al Taweelah smelter in the UAE was damaged. CRU reported full recovery there could take up to a year. Brand names present in the region include Gulf Extrusions in the UAE, whose company page states 90,000 metric tons of capacity, and Hydro for extruded products and building systems.
State alloy, temper and finish together, and cite the current standard. EN 515 gives temper designations for wrought aluminium and was confirmed in September 2022. EN 755-2 sets mechanical properties for extruded rod, bar, tube and profiles; its 2016 edition is withdrawn from July 2025 and superseded by EN 755-2:2025.
QUALICOAT's specifications set minimum requirements for plant, materials and finished products in architectural applications. For projects, ask the coater for approval documents and a warranty suited to desert and coastal exposure.
Inland Riyadh has wide temperature swings and abrasive sand, while Jeddah, Dammam, Jubail and Yanbu add salt-laden humidity. Aluminium does not rust, but poor coatings chalk and fade, and chlorides pit damaged surfaces. Large daily temperature changes move long frames, so detailing must allow for expansion. Clean facades with methods approved by the coater, since abrasive cleaning of sandy surfaces removes finish.
Extrusions for buildings may fall under SASO rules. SASO's Technical Regulation for Building Materials, Part 1, aims to define basic requirements for metals or their alloys designed for construction work, with mandatory application from 26 June 2020 and the Saudi Quality Mark for suppliers and manufacturers. The SASO page lists steel products as examples and does not mention aluminium, so do not assume either way. A SASO notification dated 1 February 2026 moved certain tariff codes into regulated status in SABER, with the code list in a linked PDF.
| Requirement | What it covers | Who applies it |
|---|---|---|
| SASO building materials regulation, Part 1 | Metals and alloys for buildings and construction | Importers, manufacturers, via the SASO and SABER guide |
| SABER PCoC and SCoC | Product and shipment conformity for regulated codes | Importers with a Saudi commercial registration |
| EN 515 and EN 755-2 | Tempers and mechanical properties | Engineers, consultants |
| Coating approval | Architectural coating quality | Facade consultants |
Confirm applicability with SASO or your importer before shipping, as of 2026.
Match the supplier to the work: a local extruder for custom dies and repeat runs, an importer for system profiles from a European or Gulf mill, a stockist for common sections. Ask for die ownership terms, batch test certificates and coating approvals. Post your requirement with drawings to compare.
Receiving checks catch most disputes before fabrication begins. Compare the delivery against the order line by line, because wrong temper and wrong die are the two errors that are hardest to see once profiles are stacked.
Keep one retained sample per batch with the batch number, so any later colour or strength question can be settled against the original material.
Metal price, conversion charge, die cost, finish and order size drive the price. Lead time is short for stocked mill finish and longer for new dies and coated custom runs. Imports arrive through King Abdulaziz Port, Jeddah Islamic Port or Jubail, and SABER documentation should be ready before shipment.