AC induction motors in Saudi Arabia drive pumps, fans, compressors, crushers and conveyors across industry, utilities and buildings. SASO 2893/2018 sets the IE3 level for single-speed three-phase cage induction motors. This page explains types, nameplates, heat and humidity derating, inverter duty, and how Saudi buyers should compare suppliers as of 2026.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified ac induction motors suppliers who quote for your order directly.
Tell us about ac induction motors in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi plants use cage induction motors for most pump, fan and compressor duties, wound-rotor motors for heavy starts, and medium-voltage machines for large pumping and process loads. They are the main product in motors and drives for Saudi Arabia, and they are normally bought together with the starter or drive that controls them.
| Type | Where Saudi buyers use it | What to specify |
|---|---|---|
| Low-voltage cage motor, TEFC | Water pumps, HVAC fans, cooling towers, conveyors | kW, poles, voltage and frequency, IE class, IP55, frame |
| Inverter-duty cage motor | Variable-speed pumps in water and process plants | Insulation system, insulated bearing, torque loadability |
| Geared motor | Material handling, cement, mixers, ports | Ratio, output torque, service factor, mounting |
| Slip-ring motor | Mills, crushers, heavy-start machines | Rotor resistor or starter, brush maintenance |
| Medium-voltage motor | Large water transfer, compressors, power plant auxiliaries | Voltage level, cooling, RTDs, vibration monitoring |
| Hazardous-area motor | Refineries, gas and petrochemical plants; see explosion proof motors | Ex marking and SASOEX certificate |
For speed control, see variable frequency drives and soft starters; precision machine axes use servo motors and drives. Where an old plant still has direct-current machines, DC motors explains what to do.
A motor's speed, torque and rating depend on supply frequency, so a datasheet must name the voltage and frequency of the site. Saudi sites are commonly supplied at 60 Hz, unlike many neighbouring grids, but confirm the supply with the plant electrical engineer or the utility for each project.
Check output power, speed, voltage, frequency, efficiency class, protection degree, duty, insulation class, temperature rise and ambient. Any gap between nameplate and datasheet is a reason to hold the delivery.
IEC 60034-30-1, second edition published on 1 December 2025, covers single-speed motors from 0.12 kW to 1,000 kW and 50 V to 1,000 V, with 2, 4, 6 or 8 poles. It bases efficiency values on a 25 degrees C ambient and 1,000 m altitude and excludes the efficiency of drive systems and converter losses.
Interior summers push winding temperature above catalogue assumptions, Eastern and Western coasts add humidity and salt, and dust affects bearings and cooling. Specify for site conditions.
As of 2026, SASO 2893/2018 sets the efficiency level at IE3 for single-speed, three-phase cage induction motors, and the IEA lists it as in force. It replaced SASO IEC 60034-30:2013. Confirm current editions and exemptions with SASO.
| Requirement | Applies to | Authority |
|---|---|---|
| SASO 2893/2018, IE3 | Single-speed three-phase cage induction motors | SASO |
| SABER conformity and shipment certificate | Regulated products imported into the Kingdom | SASO via SABER |
| IEC 60034-30-1:2025 | IE classes for line-operated AC motors | IEC |
| SASOEX certificate | Motors for explosive atmospheres | SASO |
| Aramco, SEC and other owner approved vendor lists | Motors on owner projects | Project owner |
The guide to SASO and SABER certificates explains how conformity works for imports.
Motors are supplied by manufacturer offices in Riyadh, Dammam and Jeddah, authorised distributors with stock and repair capability, pump and fan OEMs, and rewind shops. Brands with induction motor ranges:
Starters sit in motor control centers. In-Kingdom rewinding and repair capacity matters for spares strategy. The guide to vetting industrial suppliers covers checks on distributors.
A quotation should list the full rating, the efficiency evidence and the options on one datasheet per motor, so the buyer can check it against the specification line by line. Quotations that quote only kW and price invite substitutions at delivery.
Price rises with power, efficiency, voltage and protection, and lead time depends on stock.
To get quotes from Saudi suppliers, post your requirement with kW, poles, voltage, frequency, IE class and site ambient.