Skip to main content

Blowout Preventers Suppliers, UAE

Blowout Preventers (BOPs) are critical safety devices installed at the wellhead to seal, control, and monitor the well in the event of an unexpected influx of formation fluids (a kick) during drilling or workover operations. BOPs consist of annular preventers and ram-type preventers assembled in a stack configuration. In the GCC, where well control is paramount to both personnel safety and environmental protection, BOP reliability and regulatory compliance are non-negotiable requirements.

0 suppliers found

CityAll CitiesDubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairah
Filters3 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:API ASME 10+ years Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about blowout preventers in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Blowout preventers are the most important safety equipment on any drilling or workover rig operating in the UAE and Saudi Arabia. These high-pressure sealing devices provide the last line of defense against uncontrolled releases of hydrocarbons, protecting personnel, the environment, and the wellbore itself. Following the Macondo incident, BOP specifications and testing requirements have become significantly more stringent worldwide, including in the GCC.

BOP stacks consist of annular preventers (which seal around any tubular or open hole) and ram-type preventers including pipe rams, blind rams, and shear rams (which can cut through drill pipe to seal the well in an emergency). Standard GCC drilling BOP configurations include a four-ram stack with one annular preventer, rated for 10,000 to 15,000 psi working pressure. Key specifications to evaluate include bore size (typically 13-5/8 inch or 18-3/4 inch for surface stacks), ram sizes matching drill pipe and casing dimensions, and shear ram cutting capacity.

Procurement requires strict adherence to API 53 (well control procedures), API 16A (BOP specifications), and operator-specific requirements. Both Aramco and ADNOC mandate specific BOP testing intervals, typically weekly pressure testing and daily function testing. Buyers should verify that BOPs carry current API monogram certification, have documented maintenance and test histories, and are serviced by manufacturer-approved technicians. Major suppliers — Cameron, NOV Shaffer, and Hydril (GE) — maintain overhaul and certification centers in the GCC. Lead times for new BOP stacks can reach 20-30 weeks.

Frequently Asked Questions — Blowout Preventers

How often must BOPs be tested on GCC rigs?
Aramco and ADNOC typically require weekly pressure testing and daily function testing of all BOP components. Additional testing is required after any BOP maintenance, after drilling out casing shoes, and before commencing any critical well control operation. Testing must be documented and witnessed per API 53 standards.
What shear ram cutting capacity is required?
Shear rams must be able to cut the largest drill pipe in the hole at maximum expected wellbore pressure. Modern BOP stacks in the GCC include super shear rams or casing shear rams capable of cutting through 5-7 inch drill pipe and heavy-wall pipe. Cutting capacity should be verified by the manufacturer for the specific pipe grade and weight in use.
What is the difference between annular and ram preventers?
Annular preventers use a donut-shaped rubber element to seal around any size tubular or close on an open hole, providing versatile but lower-pressure sealing. Ram preventers use steel-faced rams to seal around a specific pipe size (pipe rams) or close off the entire bore (blind rams). A BOP stack uses both types in combination for redundant well control.
Can BOPs be refurbished and recertified?
Yes, BOPs are regularly refurbished and recertified by manufacturer-authorized service centers. A complete overhaul includes disassembly, inspection, replacement of seals and wear parts, reassembly, and full-pressure testing to API 16A requirements. Recertification can extend BOP service life significantly and costs 30-50% of new unit pricing.