Skip to main content

Socket Weld Fittings Suppliers, Saudi Arabia

Socket-weld fittings are forged components including elbows, tees, couplings, crosses, and unions designed for small-bore (NPS 1/2 to 2 inches) high-pressure piping connections. Manufactured per ASME B16.11 in pressure classes 3000, 6000, and 9000 from materials conforming to ASTM A105 (carbon steel) and A182 (alloy/stainless). GCC process piping and instrumentation systems use socket-weld fittings extensively, with comprehensive stocks maintained by industrial piping distributors.

0 suppliers found

CityAll CitiesRiyadhJeddahDammamKhobarMeccaMedina
Filters4 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:API ASME CE Marking ISO 9001 Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about socket weld fittings in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Socket-weld fittings are forged small-bore piping components used throughout the UAE and Saudi Arabia in high-pressure process piping, instrumentation lines, and utility systems. Manufactured to ASME B16.11 in pressure ratings of 3000 lb, 6000 lb, and 9000 lb, they provide reliable connections for pipe sizes from 1/2 inch to 4 inches (predominantly up to 2 inches).

Common fitting types include 90-degree and 45-degree elbows, equal and reducing tees, full and half couplings, crosses, and unions. Material grades include ASTM A105/A105N for carbon steel, A182 F11/F22 for alloy steel, and A182 F304/F316 for stainless steel. Socket-weld connections offer superior strength compared to threaded joints for process piping.

GCC refineries, gas processing plants, and petrochemical complexes use socket-weld fittings for high-pressure drain, vent, instrument, and sampling connections. Procurement managers should specify material grade, pressure class, nominal size, and ensure compliance with project specifications for heat treatment, hardness limits, and testing. Leading piping distributors in Jebel Ali and Dammam stock socket-weld fittings from manufacturers approved by Saudi Aramco, ADNOC, and international EPC contractors, with full material traceability from raw material to finished product.

Frequently Asked Questions — Socket Weld Fittings

What is the advantage of socket-weld fittings over threaded fittings?
Socket-weld connections provide higher pressure integrity and better fatigue resistance because the fillet weld creates a permanent, leak-tight joint. Threaded connections rely on thread engagement and sealant, making them more prone to leakage in high-pressure or vibrating service.
What pressure classes are available for socket-weld fittings?
ASME B16.11 defines three pressure classes: 3000 lb, 6000 lb, and 9000 lb. The 3000 lb class is most commonly used in GCC process piping. The 6000 lb class serves high-pressure applications, while 9000 lb is specified for extreme-pressure services.
How is the socket-weld gap maintained during installation?
A gap of approximately 1.6 mm (1/16 inch) must be maintained between the pipe end and the fitting shoulder before welding. This gap allows for thermal expansion during welding and prevents residual stresses. Spacer tools or marking the insertion depth on the pipe ensure consistent gap control.