Slewing bearings in Saudi Arabia are the large slewing rings that let cranes, excavators, stacker reclaimers, drilling equipment and wind turbines rotate under combined load and tilting moment. This page lists Saudi slewing bearing suppliers and covers the main ring designs, what to send when ordering a replacement, wear and bolt checks in dust and heat, SABER import and Aramco requirements as of 2026, and why lead times are long.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified slewing bearings suppliers who quote for your order directly.
Tell us about slewing bearings in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Slewing bearings in Saudi Arabia turn the superstructures of mobile, crawler and port cranes, excavators and mining machines, stacker reclaimers at bulk terminals, pitch and yaw systems in wind turbines, and turntables in industry and water treatment. They are the largest items in the bearings category for Saudi Arabia, and each ring is usually tied to a specific machine and drawing.
| Slewing ring design | Saudi applications | What matters |
|---|---|---|
| Single-row four-point contact ball | Excavators, tower cranes, rope winches and small cranes | Load moment, gear type, bolt pattern |
| Double-row four-point or two-point ball | Wind turbine blade pitch, crane and conveyor slewing with limited space | Higher static capacity in the same diameter |
| Crossed roller | Excavators, machine tables needing stiffness | Preload, accuracy, sealing |
| Three-row roller | Mining excavators, large crawler and harbour cranes, offshore cranes, drilling rigs | Very high moment capacity, stiff mounting structure |
| Combined ball and roller, segmented rings | Very large rotating structures and special machines | Custom design, transport and assembly |
Liebherr notes that roller slewing rings transfer much higher forces than four-point ball rings in the same space but place higher demands on the stiffness of the structure they bolt to. Ordinary shafts use ball bearings or roller bearings instead, and conveyor shafts on the same terminals use pillow block units.
Send the original ring number and the machine's make, model and serial number first; dimensions alone are not enough to define a slewing ring. The raceway geometry, hardening and load rating are not visible from outside, and the ring is part of the machine's load path.
Liebherr builds rings from 800 to 7,500 mm in standard form, with segmented designs above that, and SKF has supplied custom rings up to about 14 m. Both describe induction hardened raceways and sealed, grease lubricated raceway systems.
In Saudi conditions slewing rings wear faster when dust reaches the raceway and open gear and when grease is not renewed, and bolts lose preload over time. Measuring wear and checking bolts on a fixed schedule catches both before damage spreads.
Measure tilting clearance or drop under a defined load at fixed intervals and plot the trend against the maker's limit. SKF integrates condition monitoring on stacker reclaimer and crane rings, using drop height and displacement trends to see wear rate and plan change-outs without lost production; this suits bulk terminals and mining sites in the Eastern Province.
Use only the bolt grade and pretension in the maker's manual, tighten with calibrated equipment in a cross pattern, and recheck at the stated intervals and after any overload event. A broken bolt means checking the neighbours; the load has moved onto them.
Desert dust on crawler cranes and excavators abrades seals and gear teeth. Regrease the raceway through every nipple while turning the ring, so fresh grease pushes old grease and dust out past the seals; clean and regrease the open gear and pinion, and pick a heat and water resistant grease from the greases range. The slew drive pinion and gearbox are covered under gears and gearboxes.
Slewing bearings imported into Saudi Arabia pass through SASO's SABER platform according to HS code, while design approval rests with the equipment maker and, for marine and offshore duty, a classification society. We checked this in October 2026.
| Requirement | Applies to | Authority |
|---|---|---|
| SABER product registration and shipment certificate | Imported slewing rings, by HS code | SASO |
| OEM drawing and approval of any alternative ring | Cranes, excavators and machines | Equipment manufacturer |
| Classification approval | Offshore cranes and marine propulsion rings | DNV, ABS, Lloyd's Register, Bureau Veritas |
| Third-party inspection after a ring change | Cranes returning to service | Owner and its inspection body |
| Aramco supplier registration | Supply to Aramco facilities and offshore assets | Saudi Aramco |
Read the SASO and SABER guide before importing a ring. Aramco registers Saudi and GCC suppliers through its e-Marketplace platform from Dhahran.
Saudi slewing rings are supplied through crane and equipment OEM dealers, the large-bearing divisions of bearing makers and their distributors, and specialist importers handling older or non-original fleets.
Makers include Liebherr, which has produced more than 350,000 large diameter bearings according to its brochure; SKF slewing bearings for cranes, excavators, wind turbines and stacker reclaimers; and INA slewing rings from Schaeffler for machinery. Crane owners should ask the crane maker whether only its original ring is approved.
Ring changes need lifting capacity of their own, usually planned with the mobile crane or excavator service provider. For quotes, post your requirement with ring and machine numbers, and use the supplier sourcing guide to vet importers.
Most slewing rings are made to order in batches, so Saudi lead times are measured in months for large crane and mining rings, and price rises with diameter, row count, gearing and certification. Small excavator rings are the exception and may be stocked.