0 suppliers found · Compare and connect directly.
Skip the search. Post your requirement and we'll connect you with verified power supplies & converters suppliers who quote for your order directly.
Tell us about power supplies & converters in Riyadh, KSA and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Power supplies and converters in Saudi Arabia are the 24 V DC switch mode units, DC/DC converters and redundancy modules that power PLCs, instruments and control circuits in plants from Jubail to Jeddah. This page explains which types Saudi buyers specify, why input voltage and 60 Hz matter, how heat changes sizing, which SASO rules (SABER, SASOEX, Saudi RoHS) apply as of 2026, and how to buy.
Riyadh buys electronics and industrial automation for three audiences: factories in the industrial estates, building and security systems integrators, and data centres. A market study names Riyadh, Dammam and Jubail as the dominant automation hubs in the Kingdom, but it groups them together and does not break out Riyadh alone, and the heaviest process automation is in Eastern Province oil, gas and petrochemical plants. In the capital, food, packaging, electrical and building-materials plants are the likelier buyers of controls, drives and sensors.
Factories order programmable logic controllers, industrial automation panels, proximity sensors and inverters and rectifiers. Buildings and campuses buy CCTV and IP surveillance cameras, access control systems, structured cabling and UPS systems. Data hall projects are a separate buyer type: EDGNEX announced a 17,720 square meter data centre with 20 MW of IT load at Industrial City 2 in Riyadh, though that announcement dates from 2021 and its timetable should be checked.
Electrical and electronic goods sold in the Kingdom need SASO conformity, and wireless devices need approval from the communications regulator, so ask for the certificate with the quote. Control panels installed in industrial buildings also sit under Civil Defense and building code rules. Panel builders in the city assemble PLC and motor control cabinets, so a local integrator can shorten commissioning.
Ask for panel temperature ratings: cabinets in uncooled plant rooms see high summer temperatures. Standardise on one PLC family so spare cards are shared across lines. Check firmware support, local training and spare stock, and ask how quickly the supplier can replace a failed module when a line is stopped. Keep a small set of critical spares on site rather than relying on air freight. Our SASO and SABER guide explains the conformity paperwork, and post a requirement helps you collect comparable quotes.
Riyadh is a capital before it is an industrial centre, so its factories sit in planned estates on the edge of the built-up city rather than in the middle of it. The authority behind most of them is the Saudi Authority for Industrial Cities and Technology Zones, known as MODON, which also leases ready-to-use factory units. Riyadh Second Industrial City, to the south along the Al-Kharj road, is the long-standing manufacturing district; a 2013 report on the opening of ready-made small factories there shows how early MODON used it for small and mid-size manufacturers. Next to it, Al-Tatweer Private Industrial City, licensed in 2007 and renamed in 2020, targets electrical, food and building-materials plants. Sudair City for Industry and Businesses in the wider Riyadh region is one of the cities MODON named as a leading food and beverage manufacturing location in 2023.
Inside the city, older trading and workshop districts handle spare parts, tools and small fabrication, while warehouse stock has grown to about 28.9 million square meters, according to a Knight Frank review reported in October 2025.
Riyadh has no seaport, so imports arrive through Dammam, Jubail or Jeddah and then move inland. The Riyadh Dry Port, run under a concession by Saudi Global Ports, is linked by rail to King Abdulaziz Port in Dammam, King Fahd Industrial Port and Jubail Commercial Port, and Ras Al-Khair Port. In April 2024 Mawani reported the first container shipment by rail from Jubail Commercial Port to the dry port, 78 containers on one train. Trucks carry the remainder along the main highways, and air freight moves through the capital's airports. Ask your forwarder which leg is faster for your cargo, since customs clearance by ZATCA can happen at the port or at the dry port.
MODON and the Ministry of Industry and Mineral Resources deal with factory land and licences. The Royal Commission for Riyadh City leads the city's large programmes, including the Riyadh Metro and the main road axes. Building permits follow the Saudi Building Code through the municipality, and fire and life safety approvals come from the General Directorate of Civil Defense. Medical devices must be authorised by the Saudi Food and Drug Authority. Confirm the current steps on each authority's own platform before you sign a contract.
Construction leads, driven by the metro, King Salman Park and the New Murabba downtown, which was announced with a completion target of 2030. Healthcare follows, with three public health clusters. Food, packaging and electrical plants buy machinery for the estates, and data centres, offices and hotels buy cooling, power and facilities services. Heavy oil, gas and petrochemical demand is stronger in the Eastern Province.
