Melting furnaces in Saudi Arabia are induction, resistance and gas-fired units that melt aluminium, copper, brass, iron and other metals for casting, extrusion billet and recycling. This page covers the furnace types Saudi foundries specify, cooling and power needs in desert heat, the standards and SABER steps as of 2026, and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified melting furnaces suppliers who quote for your order directly.
Tell us about melting furnaces in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
A melting furnace takes solid metal to liquid at a controlled temperature and holds it ready for pouring. It belongs to the family of industrial furnaces and ovens in Saudi Arabia and supplies the casting processes listed under casting and forging, such as sand casting and centrifugal casting. Buyers include iron and steel foundries, aluminium extrusion and billet casters, pump and valve casting shops serving oil and gas, copper and brass fabricators, and scrap recyclers around Dammam, Jubail, Riyadh and Jeddah.
Inductotherm, a melting equipment maker whose product lines were reviewed here, names heavy steel shell, small capacity steel shell, mini-melt, rollover and tilt-pour melting furnaces, and coreless and channel holding furnaces. Nabertherm offers electrically heated or gas-fired tilting and bale-out furnaces, plus a customer test centre where trials can be run.
| Furnace type | Typical Saudi use | What to specify |
|---|---|---|
| Coreless induction furnace | Iron, steel, copper alloy and aluminium batch melting | Crucible capacity, power, frequency, cooling circuit, tilt or lift-out |
| Channel holding furnace | Large volume holding of aluminium or copper alloys | Capacity, inductor life, holding temperature |
| Bale-out resistance furnace | Aluminium or zinc melting and holding for small castings and die casting | Crucible volume, element or SiC rod heating, ladle access |
| Gas-fired tilting furnace | High volume aluminium melting with gas supply | Burner, flue route, tilt drive, energy recovery |
| Special size melting furnace | Non-standard jobs and trial melts | Custom dimensions, test melt before purchase |
Downstream, castings may need heat treatment furnaces, and firing of ceramic moulds or cores relates to kilns. Linings are bought as refractory materials.
Desert heat limits the cooling water plant, and dust threatens the electrical room. Ask the maker for the cooling flow and the highest inlet water temperature, then size the plant for the worst summer afternoon in Riyadh or Dammam.
With ambient temperatures high for months, an open air cooler may not hold the inlet temperature that an induction power supply needs. Closed loop circuits with a chiller or a heat exchanger on a plant water loop are common, and water treatment prevents scale in the coil.
A furnace of several megawatt class can be a large share of a site load, so confirm supply capacity, voltage and frequency with the utility before ordering. Keep transformers and power supplies in a cool, dust protected room, because sand and grinding dust shorten the life of electrical parts.
Jubail, Yanbu and Jeddah have humid air, which wets stored scrap and moulds. Water in molten metal can cause violent steam bursts, so keep scrap covered, dry and preheated where the process permits. Fume capture and filtration options are listed under dust collection systems.
Plan maintenance around the heat as well. Lining wear, coil insulation and water hose condition all deteriorate faster in a hot shop, so set inspection intervals with the maker and keep a log of lining thickness and coil water temperature. A furnace that runs two or three shifts through summer should have a spare crucible or a relining kit on site, because waiting for a shipment during a breakdown halts every downstream casting and machining step.
As of 2026, Saudi buyers combine international furnace safety standards in the contract with the SASO and SABER process for regulated products, and with plant level permits. Confirm the status of your furnace with an approved certification body.
| Requirement | Applies to | Authority or source |
|---|---|---|
| ISO 13577-1, general safety | Industrial furnaces and associated processing equipment in its scope | ISO |
| EN ISO 13577-2:2023 | Combustion and fuel handling on fuel-fired furnaces | ISO and CEN |
| SABER PCoC and SCoC | Products covered by a SASO technical regulation, before shipment | SASO and approved certification bodies |
| Civil Defense approval | Fuel storage, gas pipework and plant fire protection | Saudi Civil Defense |
| Environmental permit | Emissions, fume, slag and dross handling | National Center for Environmental Compliance and the Royal Commission in Jubail and Yanbu |
See the SASO and SABER guide for industrial equipment for how certificates work. Whichever route applies, ask the supplier to cite the standards in the offer.< For plants inside Jubail or Yanbu industrial cities, the Royal Commission may add its own environmental and safety conditions, so check with the city authority early, and confirm the permit steps with the relevant authorities as of 2026. A risk assessment file and an operating manual in a language your crews read should also be part of the delivery.
Pick the supplier who can size the furnace to your alloy and melt rate, supply the power and cooling package, and provide lining and service within the Kingdom. Distance between cities makes local spares and a commissioning team a real selection criterion.
Direct purchase from the manufacturer suits large induction systems and special builds. An authorised distributor suits smaller electric and gas furnaces and carries crucibles, elements and wear parts. A stockist may offer used furnaces, so ask for coil tests and lining records. Check who holds the SABER certificate if the furnace is regulated.
Prepare alloy, hourly melt rate, holding time, gas and power availability, then post your requirement. Use the guide to sourcing industrial suppliers for supplier checks. Holding furnace control upgrades connect to temperature controllers, where Eurotherm is one of the makers.
Capacity, melt rate, fuel or power, auxiliaries and freight set the price, and made-to-order induction systems take longer than catalogue crucible furnaces.
Fix delivery, installation scope and first lining in the written order. Ask also about training: operators who charge, skim and tap the furnace need instruction on safe charging, alloy additions and emergency procedures, and a supplier that includes a training visit and a spare parts list with the offer is easier to rely on than one that ships the furnace and leaves. For repeat orders of consumables such as crucibles and refractory mixes, agree a stock arrangement so that a failed lining does not stop the line for weeks.