Knife gate valves in Saudi Arabia are on-off valves with a thin blade that cuts through sludge, slurry, fibre and dry solids, used in wastewater plants, desalination, mining, cement and power stations. This page explains designs, MSS SP-81, uni and bi-directional seats, actuation, the SABER pressure equipment rule and how to buy.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified knife gate valves suppliers who quote for your order directly.
Tell us about knife gate valves in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order wafer and lugged knife gate valves for wastewater and slurry, metal-seated types for hot or abrasive solids, and stainless flanged valves for corrosive duty. They are specialist members of the industrial valves category in Saudi Arabia, built for full-open or full-closed isolation of media that would jam other valves.
| Type | Saudi application | What to state |
|---|---|---|
| Wafer uni-directional, resilient seat | Wastewater, sludge and process water in Riyadh, Jeddah and Dammam plants | Flow arrow, seat, pressure, size |
| Bi-directional slurry valve | Mining, mineral processing and tailings lines | Bi-directional seal, abrasion-resistant blade and seat |
| Lugged or flanged body | Dead-end service and equipment isolation | Flange drilling, tapped lugs |
| Metal-seated knife gate | Cement, ash and dry bulk in hot dusty duty | Seat hardness, temperature |
| Stainless bonnetless flanged valve | Chemical and corrosive slurry lines | MSS SP-81, NPS 2 to 36 |
| Pneumatic or hydraulic actuated | Automated hoppers, chutes and remote isolation | Cylinder, stroke time, air supply |
Related isolation valves include gate valves for clean liquids and gas and butterfly valves for large water lines, while globe valves handle throttling.
Choose bi-directional where the line can see back pressure or the valve isolates a dead end, and uni-directional only where flow direction is fixed and the arrow can be respected. Bray describes its slurry knife gates as bidirectional for zero leakage shutoff, and Stafsjo says its bi-directional range seals independently of pressure direction. Uni-directional designs rely on upstream pressure; backpressure can push the blade off the seat.
For knife gate valves in Saudi Arabia, abrasive slurry in mining and mineral processing, sulfides in wastewater, and dust and heat in desert plants set material and seat choice. The media description matters more than the line pressure.
Abrasive tailings wear blades and seats quickly, so specify hardened or coated blades, replaceable seats and a design that scrapes the blade clean on closing. Provide particle size, concentration and pH.
Wastewater plants for municipal and industrial use, such as wastewater treatment and sewage treatment plants, expose valves to sulfides and chlorides. Choose 316 stainless or coated bodies, and an elastomer suited to the fluid. Process water in desalination plants adds salinity.
Pneumatic cylinders need clean dry air, so fit compressed air filters on the supply. Use pneumatic actuators with solenoid valves, or electric actuators for remote sites, and protect cylinder rods from sand with boots.
Knife gate valves are bought to maker standards and MSS SP-81 for stainless flanged types, and imported valves above 0.5 bar maximum allowable pressure fall under the SASO Technical Regulation for Pressure Equipment, which lists customs heading 8481. As of 2026 that means a SABER product certificate and shipment certificate for most industrial valves, but water supply network valves are excluded, so confirm classification.
| Requirement | Scope | Authority |
|---|---|---|
| SASO Technical Regulation for Pressure Equipment | Valves under heading 8481 above 0.5 bar; PCoC per product, SCoC per shipment | SASO via SABER |
| MSS SP-81 | Stainless or lined bonnetless flanged knife gate valves, NPS 2 to 36, not for shock loading | MSS |
| Flange drilling standard | Named in the line class | ASME, EN or owner |
| Aramco or SABIC material approval | Valves on company projects | Owner |
Standards checked in October 2026. The SASO and SABER certificate guide sets out the steps and the industrial valve selection guide covers valve selection in general.
A complete enquiry states the medium, solids content and particle size, pH and chemistry, temperature, line pressure, size and flange drilling, flow direction, and the actuation and air supply available. Without these the supplier quotes a standard resilient-seated valve that may not survive the duty.
Supply comes from slurry valve makers and their distributors, industrial valve stockists and water-works suppliers in the main cities. Bray lists knife gate and slurry valves in its range. Ask who holds the SABER certificate, whether stock is cleared in the Kingdom and whether spare seats and packing sets are included. To compare offers, post your knife gate valve requirement with media, size, pressure and actuation.
Size, materials, bi-directional design, abrasion-resistant parts and actuators set price. Lead time depends on Saudi stock and certification; made-to-order and large valves are imported through King Abdulaziz Port in Dammam, Jubail Commercial Port or Jeddah Islamic Port, so check that the SCoC and document approval fit inside the delivery date. Order spare seals with the first valves.