Kaolin and clay in Saudi Arabia are aluminium silicate minerals mined in the Kingdom and imported for ceramic tile and sanitary ware, refractories, paint, plastics and rubber. This page explains grades, the Az Zabirah deposit, how to specify and test them, which licences and import rules apply, and what drives price and lead time for Saudi buyers.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified kaolin & clay suppliers who quote for your order directly.
Tell us about kaolin & clay in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers order kaolin for brightness and clay for plasticity, and they sit within the Saudi industrial minerals category. Kaolin (china clay) is mostly kaolinite and goes into paint, plastics, rubber and white ceramic bodies; ball and other plastic clays go into tile, sanitary ware and brick. The table shows how the grades map to Saudi uses.
| Grade | Where Saudi buyers use it | Properties fixed in the order |
|---|---|---|
| Washed kaolin | Emulsion paint, rubber, cable and plastic compounds | Brightness, particle size, grit, moisture |
| Calcined kaolin | Premium coatings, insulation, ceramic additives | Brightness, oil absorption, abrasion |
| Ceramic kaolin | Porcelain and sanitary ware bodies, glazes | Alumina, iron and titanium, fired colour, shrinkage |
| Ball and plastic clay | Floor and wall tile, sanitary ware | Plasticity, dry strength, fired colour |
| Refractory and fire clay | Furnace linings, kiln furniture | Alumina content, refractoriness |
| Common clay | Brick, block, cement raw meal correction | Composition, moisture |
US statistics show the pattern: about 54 per cent of kaolin goes to fillers, extenders and binders and 23 per cent to ceramics, while 61 per cent of ball clay goes to floor and wall tile. Tile buyers can read ceramic and porcelain tiles in Saudi Arabia and glass and ceramics, and for swelling clays used in drilling and piling there is a separate bentonite page. Competing fillers are calcium carbonate and talc.
Saudi Arabia produces kaolin at the Az Zabirah mine in the north, and the Kingdom's clay deposits are mostly kaolinite. The USGS Minerals Yearbook for 2016 reports Saudi kaolin output of 106,000 tonnes in 2016, down from 120,000 tonnes in 2015, and kaolin resources at Az Zabirah and the Central exploration licence of 386 million tonnes at the end of 2016. Those figures are dated, so confirm current production and grades with suppliers.
Not every Saudi kaolin suits every buyer. A tile plant needs low iron and titanium and consistent fired colour, a paint plant needs brightness and fine particle size, and a fertiliser or industrial user may accept lower grades. Ask a producer for the data sheet of the actual product, not the deposit name. Where local grades do not meet a specification, buyers import washed and calcined kaolin and ball clay, shipped through Jeddah Islamic Port, King Abdulaziz Port in Dammam and Jubail Commercial Port.
State the process and the property that matters, and ask for the test method. Plants rarely accept a clay on name alone.
Run a pilot or bench trial before approving a new source, and keep a retained sample from each lot.
Clay is stable when dry and troublesome when wet. Coastal humidity at Jeddah and Dammam raises moisture in bagged powder, while inland dust and wind contaminate open piles in Riyadh and Qassim. Tile plants in the Eastern Province and Riyadh therefore keep raw materials under cover and check moisture at the weighbridge.
As of 2026 raw kaolin enters Saudi Arabia on standard customs documents, and the product-specific rules apply to finished goods. Producers need a mining or quarry licence under the Mining Investment Law, whose regulator is the Ministry of Industry and Mineral Resources. SASO's SABER platform issues product conformity and shipment certificates for goods under technical regulations; whether raw clay needs one depends on its tariff code, so check with a customs broker.
| Requirement | Applies to | Authority |
|---|---|---|
| Mining or quarry licence | Kaolin and clay producers | Ministry of Industry and Mineral Resources |
| Commercial invoice, bill of lading, certificate of origin, Fasah filing 48 hours before arrival | Imported kaolin and clay | Saudi customs |
| SABER product and shipment certificates where a technical regulation applies | Regulated products | SASO |
| Palletised containerised imports from 8 May 2025 (phased, with exemptions) | Container cargo at ports | Saudi customs |
| Certificate of analysis per lot | Tile, paint and plastics plants | Buyer's approval procedure |
For the SABER process read the SASO and SABER certificate guide. For vetting suppliers use the supplier sourcing guide.
Compare a producer, an authorised distributor and a stockist on the same specification. A producer controls grade and can offer contract volume from mine to plant. A distributor brings imported branded grades with documents. A stockist offers small lots and speed.
Decide using lot certificates, trial results, consistency between shipments, and a quoted delivery date. Post your grade and tonnage on the post your requirement page to receive comparable offers.
Grade and haulage set price. Washed, calcined and ceramic-grade kaolin cost more than raw clay, and tight iron and titanium limits raise cost further. Mine-to-plant distance across a large country matters for a heavy mineral, so a plant near the deposit has an advantage.