Investment casting, or lost wax casting, makes precise metal parts in Saudi Arabia by pouring metal into a ceramic shell formed around a wax pattern. It is used for valve trim, pump impellers, wellhead and instrument parts, and turbine components. This page covers the process steps, tolerances, ASTM grades, local content and what drives price and delivery.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified investment casting suppliers who quote for your order directly.
Tell us about investment casting in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Investment casting builds a ceramic shell around a wax pattern, melts the wax out and fills the shell with metal. It belongs to the casting and forging family in Saudi Arabia and fits small and medium parts with fine detail and difficult alloys. Buyers sit in the energy chain: valve, pump and compressor makers in the Eastern Province, wellhead and instrument suppliers, power equipment repairers and shipyards.
| Part | Where Saudi plants use it | Points to settle |
|---|---|---|
| Valve trim, balls, discs and wedges | Refinery and gas valves; see industrial valves | Alloy, tolerance, hardness, NDT |
| Impellers and diffusers | Seawater and water injection pumps; see centrifugal pumps | Duplex or bronze grade, vane finish, balance |
| Wellhead and instrument parts | Oil and gas production; see wellhead valves | Pressure class, material certificate, owner specification |
| Marine and offshore hardware | Red Sea and Gulf vessels and platforms | Corrosion-resistant grade, polish |
| Turbine parts | Power plant hot-section repair | Nickel or cobalt alloy, grain structure, NDT |
Choose sand casting for large and heavy parts, die casting for aluminium or zinc in volume, centrifugal casting for round hollow parts, and open die forging for forged strength in heavy simple shapes.
The Investment Casting Institute lists these steps, and its typical tolerances are a linear tolerance of 1 inch plus or minus 0.010 inch with 0.005 inch added per extra inch, roundness of 0.015 inch on a 1 inch diameter, and surface roughness of 125 RMS maximum.
The Institute advises designers to consult the foundry, since capability varies from caster to caster. For critical Saudi orders, ask each foundry for capability data on your alloy and shape rather than relying on general figures.
Local capacity for energy-grade investment castings is limited, and many parts are imported or made by agents of overseas foundries, so confirm each supplier's actual plant. Saudi Aramco's iktva programme aims to keep 75 percent of its procurement spend in the Kingdom, and the programme page invites companies that want to localise materials for the Aramco supply chain to submit an investor screening form. Local status changes quickly, so ask foundries what is in production and which parts are approved.
Machine shops and finishers in Dammam, Jubail, Riyadh and Jeddah can complete parts from imported castings, using CNC machining services and surface treatment providers.
Saudi buyers combine an ASTM material standard with the owner's specification and vendor approval. As of 2026 the usual references are below and current editions should be confirmed.
| Requirement | Scope | Who sets it |
|---|---|---|
| ASTM A351/A351M | Austenitic and duplex stainless castings for pressure-containing parts | ASTM International |
| ASTM A890/A890M and A995/A995M | Duplex stainless steel castings | ASTM International |
| ASTM A957/A957M | Investment castings in carbon and alloy steel for general industrial use | ASTM International |
| ISO 8062-3 | General tolerances for castings | ISO |
| Owner material and inspection specifications | NDT, PMI, hardness, repair and heat treatment | Saudi Aramco, SABIC and other owners |
| iktva | Local content scoring in Aramco procurement | Saudi Aramco |
For valves and equipment that contain castings, certificates may also be needed under SASO and SABER; the SASO and SABER guide explains which products need what. Valve selection context is in the valve selection guide for the GCC.
Choose on alloy capability, process control and inspection. A supplier should be able to tell you its wax, shell, melting and heat treatment steps and which ones are subcontracted.
Use post your requirement to compare Saudi and overseas foundries on one drawing, with alloy, quantity and test scope.
Pick the alloy from the fluid, temperature and corrosion environment before you pick the process. Investment casting is chosen when the alloy is expensive or hard to machine, so material waste matters.
Alloy, wax tooling, part weight and testing set the price. Tooling and shell cycles set the first delivery, and imports add shipping and customs.