Industrial springs in Saudi Arabia are the compression, extension, torsion, disc and leaf springs used in valves, machinery, mining equipment, vehicles and pipe supports, made to a stated load, rate and free length. This page lists Saudi spring suppliers and explains types, wire materials, desert heat and coastal corrosion, EN 13906 design rules as of 2026, SABER checks, and what drives price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified industrial springs suppliers who quote for your order directly.
Tell us about industrial springs in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers specify springs for valve and actuator internals in refineries, crusher and conveyor equipment at mines, press and machine tooling, truck suspensions and spring hangers on hot piping. The family sits in industrial fasteners and hardware for Saudi Arabia. A spring is ordered by the load it must give at a working length, not by its outline.
| Type | Typical Saudi use | What to specify |
|---|---|---|
| Compression spring | Valves, clutches, tooling, vibrating screens | Wire and outside diameter, free length, rate, load at length, end finish |
| Extension spring | Hatches, counterbalances, return mechanisms | Initial tension, hook type, maximum extension |
| Torsion spring | Hinges, latches, actuator returns | Torque and angle, wind direction, legs, arbor |
| Disc (Belleville) spring | Bolt preload, press and clutch loads in tight space | Load and deflection, stack layout, material |
| Leaf spring | Trucks, trailers, mining haulers | Leaf count, camber, eye type, rating |
| Spring hangers | Steam and process piping in plants | Pipe load, travel, load variation |
For relief valve springs see safety relief valves; pipe load springs belong with pipe supports and hangers, and rubber options with rubber mounts and vibration dampers. Springs are usually retained by bolts and nuts and guided by washers and pins.
Carbon or alloy spring steel suits ambient dry duty, stainless steel suits damp and corrosive duty, and nickel alloys suit hot service. The wire grade follows operating temperature, corrosion and the number of cycles.
Hot service makes springs lose load, dust wears coils on exposed equipment, and salty coastal air starts pits that become fatigue cracks. Specify real operating temperature and corrosion protection.
Give the load at the working length, not just the dimensions. Two springs with the same outline can differ in rate by a factor of two, and the wrong rate is the usual reason a replacement valve or press spring fails to perform.
State the load at two lengths if the spring moves, with the tolerance you can accept. Say how it is guided (on a rod, in a bore), because the spring grows in diameter under compression and may rub. Give the end type: closed and ground ends sit flat, open ends do not. Add the operating temperature and any chemical contact, such as oil, hydrocarbons or washdown. For valve springs, quote the valve model and set pressure so the maker can match the original. Keep one sample of any critical spring as a reference, and record the supplier and batch in the maintenance file.
Saudi spring orders follow the drawing and standards named by the owner or Aramco, and imports may need SABER certificates if the HS code falls under a SASO technical regulation. There is no separate Saudi mark for springs as such, as of 2026.
| Requirement | Applies to | Who sets it |
|---|---|---|
| EN 13906-1 | Design and calculation of helical compression springs | CEN, cited on the drawing |
| EN 10270 series | Wire for mechanical springs, including stainless | CEN, in the material specification |
| Valve and hanger codes in the piping class | Springs in valves, actuators and hangers | Aramco and EPC specifications |
| SABER PCoC and SCoC | Products under a regulated HS code | Saudi Standards, Metrology and Quality Organization (SASO) |
| EN 10204 type 3.1 certificate | Traceability of critical springs | Project quality plan |
The SASO and SABER certificates guide explains who can request them. EN 13906-1 is under revision, so confirm the edition cited.
Use stockists for catalogue compression and extension springs, and use a manufacturer that can coil to drawing and test load for custom, high-cycle or hot springs. Avoid ordering by size only.
For spring hangers on piping, E&S Tec makes variable and constant spring hangers. To compare quotes, post your requirement with the drawing.
Price follows wire size, material, quantity and tolerance, and lead time follows stock versus custom coiling and any SABER step. No fixed prices are given.