Industrial clutches in Saudi Arabia engage and release drives for presses, cranes, winches, engine-driven pumps and conveyors, and torque limiters stop jams from reaching gearboxes. This page lists Saudi clutch suppliers and explains the main designs, how to size them for desert heat, which certificates matter, and how cost and delivery work.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified industrial clutches suppliers who quote for your order directly.
Tell us about industrial clutches in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi buyers specify friction, fluid-actuated, electromagnetic, centrifugal and one-way clutches, plus torque limiters, each for a different trigger. Together they form the on and off side of couplings and clutches for Saudi industry.
| Design | Trigger | Common Saudi application |
|---|---|---|
| Spring or manual friction clutch | Operator lever | Engine-driven firewater and irrigation pumps, workshop equipment |
| Air or hydraulic multi-disc clutch | Control valve | Drilling rig auxiliaries, cranes, presses, marine drives |
| Electromagnetic clutch | Electrical signal | Packaging lines, conveyors, vehicle air conditioning compressors |
| Centrifugal clutch | Rotational speed | Engine-driven compressors and pumps |
| Overrunning clutch and backstop | Direction of rotation | Inclined mine conveyors, standby drives, elevators |
| Torque limiter | Torque above a set value | Crusher feeds, mixers, conveyor heads |
Flender states that its ARPEX disengaging safety couplings give overload protection with complete disengagement and high repeat accuracy. That is the torque-limiter function, separate from simple joining of shafts by flexible couplings.
Clutches turn slip energy into heat, so desert ambient reduces what a given size can absorb. Check thermal rating at your site temperature, not only the torque in the catalogue.
As of 2026 we could not confirm a dedicated SASO scheme for mechanical industrial clutches, so specifications from the end user and project govern. Electrical parts and hazardous area gear follow SASO rules.
| Requirement | Applies to | Authority or user |
|---|---|---|
| SASOEX certificate | Electrical equipment in explosive atmospheres, based on IECEx or ATEX | SASO |
| SABER and shipment certificate | Regulated electrical products, such as drive motors or coils where covered | SASO |
| ATEX Directive 2014/34/EU | Non-electrical clutches in explosive atmospheres | Plant owner, EPC |
| Vendor approval | Supply to Aramco and large operators | End user |
The guide to SASO and SABER certificates for industrial equipment explains how shipments clear. Ask your clearing agent whether the specific clutch or its electrical parts fall under a technical regulation.
You need a clutch for on and off control or overload disconnect, a fluid coupling for soft starting with continuous slip, and a rigid coupling where shafts are exactly aligned and always connected.
Decide the function first. A backstop prevents reverse rotation, a centrifugal clutch lets an engine start unloaded, a torque limiter disconnects on a jam, and a multi-disc clutch gives controlled engagement. Mixing these up is a frequent cause of re-orders.
Supply comes from manufacturer subsidiaries, power transmission distributors in Riyadh, Jeddah and Dammam, marine suppliers at Jeddah and Jubail, and workshops that rebuild clutch packs. Engineered units are built to order.
On ListGCC, Flender offers disengaging safety couplings. For vetting steps, see the supplier sourcing guide for the UAE and Saudi Arabia.
To collect quotes, post your requirement for industrial clutches with torque, speed, cycle rate, actuation and site ambient.
State the function, torque, speed, cycle rate, actuation, ambient, shaft sizes and mounting, and attach the datasheet if one exists. A supplier cannot size thermal capacity from torque alone, and a vague enquiry returns quotes that cannot be compared.
Inspect lining thickness, release clearance and the condition of the air or oil supply at every planned stop, and log engagement time. Clutches usually warn before they fail: engagement gets slower and hotter.
Drilling and oilfield service, mining at Ma'aden sites, port cranes at Dammam and Jeddah, and engine-driven firewater and irrigation pumps all use clutches. Packaging and food plants in Riyadh and Jeddah favour electromagnetic types, and inclined conveyors in mines rely on backstops.