Hospital furniture and infrastructure in Saudi Arabia covers hospital beds, medical gas pipeline systems, nurse call, modular operating theatres and cleanroom equipment for government and private hospitals. This page lists Saudi suppliers and explains the rules that shape each package: SFDA national provisions on 60 Hz power and gas cylinder colours, the current adult bed standard, medical gas design codes, NUPCO tender practice, and what drives cost and delivery.
0 suppliers found · 5 subcategories
Skip the search. Post your requirement and we'll connect you with verified hospital furniture & infrastructure suppliers who quote for your order directly.
Tell us about hospital furniture & infrastructure in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
In Saudi Arabia, hospital furniture and infrastructure is the equipment built into or placed in clinical rooms that lets a hospital admit patients: beds, medical gas pipeline systems, nurse call, modular operating theatres and cleanrooms. It belongs to the healthcare and medical equipment sector in Saudi Arabia, and it is bought for new government hospitals, private hospital expansions and clinic fit-outs across Riyadh, Jeddah, the Eastern Province and the regions.
Government facilities often buy beds and furniture through NUPCO tenders, while medical gases, nurse call and theatres are usually delivered by specialist contractors under the building contract. Private operators buy both routes directly.
| Item | Typical Saudi buyer and use | What to specify |
|---|---|---|
| hospital beds | Ministry and private hospitals, ward and ICU expansions | Electric functions, safe working load, rails, CPR release, battery, 60 Hz supply, test report to the current bed standard |
| medical gas systems and pipelines | New hospitals, ICU and theatre extensions | Design code named by the owner, source plant and backup, alarms, terminal unit type, cylinder colour marking |
| nurse call systems for wards | Inpatient units, emergency departments, long-term care | Device schedule by room, speech, fire alarm link, mobile alerts, Arabic and English displays where wanted |
| modular operating theatres | Surgical suites, cardiac and hybrid rooms | Panel system, air canopy, pressure regime, pendants, control panel, validation |
| cleanroom equipment | Hospital pharmacy compounding, IVF, sterile preparation | Target class to ISO 14644, HEPA filters, pass boxes, monitoring, certification |
Operating tables and surgical lights are listed under surgical equipment in Saudi Arabia, imaging rooms that share the medical gas and power backbone under diagnostic equipment, and ward disposables under medical consumables for hospitals.
As of 2026 the Saudi rules come from three places: SFDA for products that are medical devices (marketing authorisation is explained on the sector page, and the SFDA National Provisions add local technical requirements), the owner's design brief or Ministry of Health requirements for the building, and the international standards those documents cite.
| Requirement | Applies to | Authority or source |
|---|---|---|
| Design for a 60 Hz supply at 230 V or 400 V nominal, SASO-2203 plug where relevant | Electric beds and other mains powered devices | SFDA National Provisions, Article Seven |
| Conductor colours to SBC part 401 and SFDA.MD/IEC 60601-1 | Electrical medical devices | SFDA National Provisions, Article Six |
| Medical gas cylinders coloured by content to SFDA.MD/ISO 32, visible at the valve end | Cylinders on manifolds and portable cylinders | SFDA National Provisions, Article Seventeen |
| Performance under local temperature and humidity, stated in IFU and label | All medical devices | SFDA National Provisions, Article Thirteen |
| IEC 80601-2-52:2026 for adult medical beds | Electric and manual hospital beds | IEC |
| ISO 7396-1 for pipeline systems for compressed medical gases and vacuum | Medical gas supply, pipework and alarms | ISO |
| HTM 02-01 or NFPA 99 as the medical gas design basis | Medical gas pipeline design | Named in the owner or Ministry design brief; confirm per project |
IEC published IEC 80601-2-52:2026 on 5 May 2026 as the standard for basic safety and essential performance of adult medical beds, replacing IEC 60601-2-52. Children's beds and stretchers are outside its scope. Because Saudi tenders written before mid 2026 will still cite the older number, state in the tender which edition you accept and ask the manufacturer which one its test report covers. Also check that electric beds are configured for 60 Hz as SFDA Article Seven requires.
A Saudi medical gas installation has two halves. The pipeline (plant, copper distribution, zone valves, area alarms and terminal units) follows the design code the owner names, commonly HTM 02-01 or NFPA 99, and ISO 7396-1 for safety, alarms and non-interchangeable connections. The gas supply (bulk liquid oxygen, cylinders or on-site generation) comes from a gas producer, and every medical gas cylinder must carry the colour marking set by SFDA.MD/ISO 32. Producers of industrial and medical gases in Saudi Arabia and suppliers of cylinders, manifolds and regulators usually quote the supply side; the pipeline goes to a contractor with medical references, not to an industrial gas distribution installer.
Facility design requirements in Saudi Arabia depend on who owns the hospital: Ministry of Health projects follow the Ministry's design brief, and private hospitals follow the owner's brief and the licensing conditions of the health authority. Ask the owner or the Ministry which document and edition governs the project before specifying theatres, cleanrooms and nurse call, and confirm it again if the design started several years ago.
Dust in Riyadh and the central region, humidity in Jeddah and Dammam, and long summer peaks are what Saudi hospital infrastructure has to survive. SFDA Article Thirteen asks manufacturers to show devices perform under local temperature and humidity, but plant rooms and gas compounds are the owner's responsibility.
Choose bed and furniture suppliers on SFDA status, local service and spare parts, and choose infrastructure contractors on comparable completed hospitals and their testing method. For NUPCO tenders, the supplier must be registered and qualified with NUPCO, and the technical committee checks specification match, terms, samples within three days on request, and references from recognised healthcare providers.
NUPCO may split an award among several suppliers and quotes three to six months from start of evaluation to preliminary announcement, so plan bed deliveries accordingly. Our guide to sourcing suppliers in Saudi Arabia and the UAE explains supplier verification and fair quote comparison. To reach several Saudi suppliers, post your requirement with the bed count and drawings.
Quantities, design code and testing scope set the price; factory slots, sea freight and commissioning set the timeline. Ask every bidder to price the same schedule and the same tests.
Beds held in Saudi warehouses can be delivered in weeks, while ICU beds, theatre panels and gas plant usually need months once sea freight into King Abdulaziz Port in Dammam or Jeddah Islamic Port and SFDA port clearance are added. Commissioning and gas purity testing come last and should have their own slot in the programme.
