Fiber Cement Boards Suppliers, Saudi Arabia
Fiber Cement Boards are flat or profiled panels made from cement, cellulose fibers, and sand, used as external cladding, soffit lining, partition walls, and floor substrates in GCC construction. These boards offer excellent fire resistance, moisture stability, and durability in the Gulf's harsh climate, making them a versatile alternative to gypsum in wet areas and exterior applications. Major manufacturers supply the GCC through regional distributors and project-specific shipments.
0 suppliers found
No suppliers match these filters
Try clearing some filters — or post your requirement and let matching suppliers come to you.
Post your requirement, get quotes from multiple suppliers
Tell us about fiber cement boards in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Fiber cement boards are manufactured by combining Portland cement, ground sand, cellulose fibers, and water using autoclave curing or air-curing processes. The resulting panels are non-combustible (Class A1 fire rated), dimensionally stable in humid conditions, and resistant to termites and rot. Standard board sizes include 1200 x 2400mm and 1220 x 2440mm in thicknesses from 4.5mm to 25mm. Textured, painted, and through-coloured facade boards are also available for architectural applications.
In the UAE and Saudi Arabia, fiber cement boards are specified for external wall cladding and rain-screen facades, bathroom and kitchen partition walls (replacing standard gypsum board in wet areas), ceiling soffits in covered parking and outdoor corridors, floor underlayment for tile installations, and fire-rated shaft and duct lining. Key specifications include board density, flexural strength, moisture movement, fire classification per BS EN 13501-1, and surface finish requirements.
Leading fiber cement board manufacturers in the GCC market include James Hardie, Etex (Equitone and Siniat), SCG (Smartboard), and Knauf. Buyers should verify that the specified product has local municipality approval — Dubai DCGL listing and Saudi SASO certification are commonly required. For cladding applications, the fixing system (concealed or visible), joint treatment, and movement joint detailing must be specified in coordination with the manufacturer's technical team. Typical lead times from regional stock are 2 to 4 weeks, with project-specific colours or textures requiring 8 to 12 weeks from the factory.