Coriolis flow meters measure mass flow, density and temperature in one device, and in Saudi Arabia they serve crude and product transfer, petrochemical batching, gas duties and food plants. This page explains the duties, how to choose for gas content, pressure and heat, which API, OIML and SASO requirements apply as of 2026, and which brands supply them.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified coriolis flow meters suppliers who quote for your order directly.
Tell us about coriolis flow meters in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Coriolis flow meters measure mass flow, density and temperature in one device by vibrating a tube and sensing its twist. In Saudi Arabia they serve crude and product transfer, LPG and NGL, chemical and petrochemical batching, fuel loading and food plants, and they are one principle within flow measurement instruments for Saudi Arabia. Their strength is direct mass measurement of non-conductive liquids where volume meters need compensation.
Emerson lists custody transfer and fiscal hydrocarbon measurement, CO2 capture and storage, hygienic food and beverage work, two-phase flows and high-pressure, cryogenic and high-temperature processes among the duties of its Micro Motion range, with ELITE models recommended for the hardest ones. For a Saudi buyer the practical result is a wide choice, and a need to state exactly which duty you have.
| Duty | Saudi example | Key question |
|---|---|---|
| Fiscal or custody transfer | Terminal loading, product pipelines, export metering | Which owner standard and witness test? Is a prover or in-situ verification used? |
| Process and blending | Petrochemical feed, additive injection, fuel blending | Pressure drop and accuracy at the low end of the range |
| Gas and high pressure | Fuel gas, CO2, hydrogen fuelling | Rated pressure, gas density, compensation |
| Hygienic | Dairy, juice and beverage plants in Riyadh and Jeddah | Cleaning method, drainable design, certificates for food contact and halal sites |
| Dosing and low flow | Water treatment chemicals, lube skids | Zero stability and minimum flow |
If the liquid conducts, compare electromagnetic flow meters. For large lines see ultrasonic flow meters, for steam vortex flow meters, for clean fuels turbine flow meters and for cheap local indication rotameters.
Choose a Saudi Coriolis meter by the fluid and the standard it must satisfy, then verify pressure drop, gas content and the ambient limits of the electronics.
If the meter is for custody transfer, Aramco, terminal operators or the contract will specify the metering standard, accuracy, proving and witness tests. API MPMS Chapter 5.6 gives guidance on specification, installation, verification and operation of Coriolis meters for liquid hydrocarbons, but the owner's documents control. Obtain them through the EPC contractor before quoting.
Emerson notes that with entrained gas a Coriolis meter keeps measuring the mixture but density reads low, and that its G-Series is not recommended for entrained-air two-phase use. Hydrocarbon transfer from tanks and wells can carry gas, so design for gas elimination and ask for a model suited to it.
Emerson lists high-pressure ELITE models, with limits of 250 bar for CMF300M, 260 bar for CMF400P and 320 bar for CMF400H depending on configuration and regulation; check the current data sheet of any model you intend to buy. Hot summer ambient and sun on transmitters in Jubail, Yanbu or Ras Tanura call for shades or remote electronics.
Give the supplier viscosity at operating temperature, flow range and available head. Coriolis sizing is not the same as pipe sizing, and heavy crude or fuel oil can bring high pressure drop.
In-situ verification checks the meter health without removal. Emerson says Smart Meter Verification takes under 90 seconds, though it may not replace calibration depending on quality procedures and regulation. Ask your client which is accepted and whether Saudi calibration facilities are available.
For Saudi Coriolis meters the controlling documents are the owner's metering standard, API and OIML publications for custody transfer and legal metrology, and the SASOEX certificate for electronics in explosive atmospheres. Checked as of October 2026; SASO's measurement and calibration pages were not opened for this page, so confirm which instruments are regulated with SASO.
| Requirement | Applies to | Authority |
|---|---|---|
| API MPMS Chapter 5.6, 2nd edition (December 2021) | Coriolis meters for dynamic measurement of liquid hydrocarbons | API, via Aramco and owner specifications |
| OIML R 117-1:2019 | Legal metrology of dynamic liquid measuring systems; class 0.3 for pipelines, class 0.5 for most other systems | OIML, applied through national metrology |
| SASOEX certificate | Electrical equipment, including transmitters, in explosive atmospheres; based on IECEx or ATEX documents | SASO |
| Aramco and SEC approved vendor and model lists | Meter makes and models on owner projects | Each owner |
| ISO/IEC 17025 calibration certificates | Quality or custody calibrations | Accredited laboratory |
OIML R 117-1 states that its accuracy classes are 0.3 for measuring systems on pipelines and 0.5 for all measuring systems not otherwise stated, in particular fuel dispensers, and that Coriolis, ultrasonic and electromagnetic meters do not undergo the endurance test applied to mechanical meters. SASO describes SASOEX as a certificate based on IECEx or ATEX test certificates and reports, and requires a Saudi commercial registration. Our SASO and SABER guide explains the shipment side.
Saudi Coriolis meters come from instrument makers' Saudi entities, authorised distributors and metering integrators in Dammam, Al Khobar, Jubail and Riyadh. Brands include Emerson Micro Motion, Endress+Hauser, KROHNE, Yokogawa and Foxboro from Schneider Electric.
Ask whether the supplier is the appointed channel for the brand in the Kingdom, whether the model is on your client's vendor list, and what field service, verification and calibration they offer in-Kingdom. Custody skids need an integrator with provers, flow computers and witness-test experience. Our sourcing guide covers agency and registration checks, and you can post your requirement with fluid data. Signals usually go to a DCS or SCADA system.
Size, pressure class, material and certification set price. Approved-vendor status and calibration slots set delivery.