Breakwater materials in Saudi Arabia are the armour rock, concrete armour units, underlayer stone and filter fabrics that protect ports, resort islands, marinas and seawater intakes on the Red Sea and Arabian Gulf. This page lists Saudi suppliers and covers the material types, how rock is graded and tested, which environmental and port authorities are involved, and what sets cost and delivery on remote coastal sites.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified breakwater materials suppliers who quote for your order directly.
Tell us about breakwater materials in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Breakwater materials are the stone and precast concrete elements that form rubble mound breakwaters, revetments and groynes, plus the geotextiles that keep fine soil from escaping beneath them. In Saudi Arabia they shelter Mawani port basins, industrial harbours at Jubail and Yanbu, Red Sea resort marinas, and intake and outfall works for desalination plants. They are one of four product groups in the Saudi marine and coastal construction category.
Saudi designers build a breakwater in layers. Quarry run fills the core. Underlayers of selected rock filter between the core and the outer face. The armour layer, either large armourstone or concrete units, absorbs the waves. Toe stones stop the armour sliding off the seabed, and a filter fabric separates the mound from the seabed or fill.
| Element | Function | Specification points for Saudi tenders |
|---|---|---|
| Quarry run core | Bulk of the structure | Grading limits, fines content, end-tipping or barge placement |
| Underlayer stone | Filter and bedding for the armour | EN 13383-1 mass class, layer thickness, compatibility with core grading |
| Armour rock | Wave protection on the exposed face | Heavy mass class, block shape, density and breakage resistance results |
| Toe rock | Supports the armour at the seabed | Mass class, scour allowance, placement tolerance below water |
| Concrete armour units | Armour where heavy rock is short or a single layer is preferred | Unit type and volume, concrete mix for chloride and sulphate exposure, licence, placement method |
| Filter geotextile | Separates the mound from seabed or reclamation fill | Properties tested under EN 13253, robustness for rock placement, overlaps |
The same coastal programme usually buys dredgers and dredge pumps for basins and reclamation to deepen the sheltered area and win fill, floating pontoon systems for marinas and ferry landings once the water is calm, and piling for jetties and quays. Filter fabric is available through suppliers of geotextiles and geomembranes.
Saudi Arabia has two coasts with different demands. Red Sea sites often lie in deeper, clear water near coral reefs, so rock must be clean and placement controlled, while Gulf sites are shallow with soft seabeds where toe and filter design matter most.
Dusty or weathered rock releases fines when dropped into water, and plumes near reefs draw scrutiny from environmental regulators. Ask quarries how they screen out fines and wash armour stone, and plan placement methods that limit turbidity.
Rock on the waterline wets and dries twice a day under strong sun. The Rock Manual sets out the laboratory and field tests used to judge whether a source will crack or wear. Ask for results that match the current quarry face, because rock quality can change from bench to bench.
Eastern Province soils and seawater both carry chlorides and sulphates, so armour unit concrete needs a mix designed for that exposure and careful curing in summer. Large units crack if lifted too early or cured too hot, and damaged units are rejected at placement.
On soft Gulf seabeds, a filter fabric and a well-graded bedding layer stop the mound punching into the mud or losing fines. Settlement monitoring after construction is common on these sites.
Saudi breakwater projects work to international material standards named in the contract, mainly EN 13383-1 for rock and EN 13253 for geotextiles, while the National Center for Environmental Compliance, port authorities and, on the Red Sea, developer and authority rules govern the works.
| Requirement | Scope | Authority or source |
|---|---|---|
| Environmental licences and permits | Coastal construction, reclamation and dredging | National Center for Environmental Compliance (NCEC) |
| Port and marine licences | Works inside Mawani ports such as King Abdulaziz Port, Jeddah Islamic Port, Jubail and Yanbu | Saudi Ports Authority (Mawani) |
| Marine tourism and marina rules | Tourist marinas in the Saudi Red Sea area | Saudi Red Sea Authority |
| EN 13383-1 | Armourstone mass classes and test properties | CEN standard; confirm the edition named in the contract |
| The Rock Manual (CIRIA C683) | Rock structure design, quality control and monitoring | Industry guidance from CIRIA, CUR and CETMEF |
| BS EN 13253:2016 | Geotextiles in coastal protection and revetments | BSI adoption of the CEN standard |
NCEC was set up by Council of Ministers decision in 2019 and issues environmental licences and permits. Mawani manages the Kingdom's commercial seaports outside economic cities, and works inside a port boundary need its approval. The Saudi Red Sea Authority, created in 2021, regulates marine tourism in the Red Sea area and has issued a Marina Design and Operations Regulation. Steps and timelines change, so confirm them as of 2026 with your environmental consultant and the port or authority.
Concrete armour shapes can carry licences. Core-Loc may only be used outside the USA under licence from CLI, and Accropode units are produced by licensed contractors who receive the designer's technical support. Check whether the tender names a proprietary unit or allows an equivalent shape.
Pick rock suppliers on their ability to produce the heavy classes at the rate the marine crew places them, and armour unit suppliers on licence, moulds and casting yard control. A cheaper rate per tonne is no saving if the heavy class runs short mid-season.
To compare quarries and casting yards on the same basis, post your breakwater rock requirement with tonnage per class and delivery point. Our supplier sourcing checklist for Saudi and UAE buyers covers licence and reference checks.
Distance from quarry to coast and the share of heavy armour in the section are the main cost drivers for Saudi breakwaters; quarry yield of large blocks and marine placement windows set the schedule.