Acids and alkalis in Saudi Arabia are the mineral acids and bases, mainly sulfuric acid, hydrochloric acid, caustic soda, sodium hypochlorite and soda ash, that refineries, desalination plants, mines and factories buy in tankers, IBCs and bags. This page lists Saudi suppliers and covers grades, Kingdom production in Jubail and Ras Al-Khair, chemical import permits as of 2026, storage in inland heat, and price and lead time.
0 suppliers found
Skip the search. Post your requirement and we'll connect you with verified acids & alkalis suppliers who quote for your order directly.
Tell us about acids & alkalis in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Saudi demand for acids and alkalis centres on a few bulk chemicals used for neutralisation, regeneration, cleaning, metal processing and water treatment, priced by strength and grade. They belong to the industrial chemicals family for Saudi buyers, which covers the general permit and storage background. This page focuses on the individual acids and bases, how the Kingdom produces them and the equipment that holds them safely.
| Product | Where it goes in the Kingdom | Specification points |
|---|---|---|
| Sulfuric acid | Phosphate fertiliser, metal leaching, demineraliser regeneration, effluent neutralisation | Concentration, iron and arsenic limits, technical, electrolyte or reagent grade |
| Hydrochloric acid | Oil well acidising, pickling, membrane and exchanger cleaning, resin regeneration | Strength, inhibited or plain, iron content, tanker lining |
| Caustic soda | Alumina refining, refinery caustic treating, desalination pH, detergent plants | Lye strength or flake, chloride and chlorate limits, grade |
| Sodium hypochlorite | Seawater intake chlorination, potable water, cleaning | Available chlorine, delivery age, chlorate limit |
| Nitric and phosphoric acid | Passivation, fertilisers, food and metal pre-treatment | Strength, purity, restricted chemical status |
| Soda ash and hydrated lime | Softening, glass, neutralising acid wastewater, mining | Dense or light ash, available lime, bag or bulk |
Oil well stimulation acids are usually supplied as blended packages with inhibitors and additives; those are covered under oilfield specialty chemicals. Sites using hypochlorite to control fouling should also compare oxidising and non-oxidising options under biocides for Saudi water systems.
Saudi Arabia makes several of its own acids and alkalis, mostly in the Eastern Province, which shortens lead time for Gulf coast buyers. Central and Western region users still rely on road freight from Jubail and Dammam or on imports through Jeddah.
Ras Al-Khair, the mining and minerals industrial city north of Jubail, was planned with facilities to make phosphoric and sulfuric acid alongside phosphate fertiliser, so much of the Kingdom's sulfuric acid is made and consumed inside fertiliser complexes rather than sold on the merchant market. On the chlor-alkali side, thyssenkrupp nucera announced in June 2025 a contract for the next expansion phase of a chlor-alkali plant in Jubail Industrial City that makes caustic soda, sodium hypochlorite, hydrochloric acid and liquid chlorine, including chlorine for water treatment, following earlier plants in Dammam and Jubail. Even so, specialty strengths and high-purity grades are often imported, so ask each supplier where the material is made.
Storage design in Saudi Arabia has to cope with very hot, dry summers inland and humid, salty air on both coasts. Published carbon steel limits for concentrated caustic soda and sulfuric acid sit near 49 C, a temperature an unshaded steel tank in Riyadh or Qassim can pass in summer.
OxyChem's caustic soda handbook puts the ideal storage temperature in carbon steel at 80 to 100 F (about 27 to 38 C). Above 120 F (about 49 C) it reports faster corrosion, iron contamination and cracking risk in steel that has not been stress relieved, and it recommends epoxy lined steel or 304L or 316L stainless where iron matters. The same handbook notes that 50% caustic starts to crystallise at 54 F (about 12 C), which can happen on winter nights in the north and in Riyadh, so trace heat exposed caustic lines.
Rolled Alloys reports that carbon steel resists 88 to 99.5% sulfuric acid at low velocity and below 120 F because of a protective sulfate film, which is easily damaged as velocity increases, and that dilute acid below about 85% needs alloys instead. In practice that means desiccant vent dryers on steel tanks, shaded tanks and lined or alloy piping at pump discharges.
Sandstorms load open vents and day tanks with dust, which ends up in dosing pump valves. Hydrochloric acid stores need scrubbed vents, and their fumes corrode steel and switchgear quickly in Jubail, Dammam and Jeddah humidity. Lined tanks and bunded terminals for Saudi plants and HDPE pipe for dilute lines are common choices.
Every chemical import into Saudi Arabia needs a permit under the Law of Chemicals Import and Management, and the Ministry of Industry and Mineral Resources issues chemical clearances for industrial users through the Senaei platform, as of 2026. Restricted chemicals go through a separate permit.
| Requirement | Applies to | Authority |
|---|---|---|
| Import permit | All imported chemicals, by intended use | Competent ministry, in coordination with the Ministry of Interior |
| Chemical clearance (non-restricted) or restricted chemical permit | Chemicals for industrial facilities | Ministry of Industry and Mineral Resources, Senaei |
| Competence over water treatment chemicals | Acids and alkalis used to treat water and sewage | Ministry responsible for water |
| Transport permit | Moving chemicals by road | Ministry of Transport |
| Container specifications | Drums, IBCs and containers for chemicals | SASO |
An Arab News report in June 2026 said the ministry handled 763 chemical clearance requests in May, 727 for non-restricted imports and 36 restricted chemical permit applications. Acids used as drug or explosives precursors can fall into the restricted group, so ask the supplier whether your item is restricted and who files the request.
Pick the supplier by delivery route and paperwork, not only price: a producer in Jubail can be cheapest in the Eastern Province, while a Riyadh or Jeddah distributor with local tanks often wins on reliability for smaller users.
Crews unloading acid need face protection and acid gas respirators. Our guide to checking Saudi suppliers explains commercial registration checks, and you can post your requirement for acids or caustic to collect offers on one basis. Water plants buying acid and caustic usually also buy coagulants for Saudi water treatment.
Price follows sulfur, salt and energy markets, then concentration, packaging and distance. Delivery from Jubail to Riyadh or Jeddah adds hazardous road freight, and imports add sea freight and clearance time.
Domestic commodity grades often deliver within days in the Eastern Province. Imported grades and anything restricted take weeks, so hold a safety stock sized for summer.