Ground Anchors Suppliers, UAE
Ground Anchors (also called tiebacks or soil anchors) are pre-stressed or passive tensile elements installed into the ground to resist uplift, overturning, or lateral forces on retaining walls, basement structures, and foundations in the GCC. They are critical for deep basement excavations in urban areas where lateral bracing space is limited. Ground anchor design and installation is a specialist discipline requiring coordination between the geotechnical engineer, anchor supplier, and installation contractor.
0 suppliers found
No suppliers match these filters
Try clearing some filters — or post your requirement and let matching suppliers come to you.
Post your requirement, get quotes from multiple suppliers
Tell us about ground anchors in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.
Ground anchors are tensile structural elements drilled and grouted into soil or rock to provide resistance against pulling forces. Types include temporary anchors (for excavation support during construction, typically designed for 2-year service life), permanent anchors (for long-term retention of structures, designed for 50 to 100 years with corrosion protection), and passive anchors or soil nails (shorter, un-tensioned bars that develop load through ground movement). Anchor tendons are typically 7-wire prestressing strand or high-strength threaded bar, grouted into drill holes with cement grout.
In the UAE and Saudi Arabia, ground anchors are used for deep basement excavation support (combined with sheet piles or diaphragm walls), slope stabilisation, retaining wall tiebacks, anti-flotation anchoring of structures with high water tables, and tower foundation tension piles. Key specifications include anchor type (temporary or permanent), design load (typically 500 kN to 3000 kN per anchor), free length, bonded length, ground conditions in the bond zone, and corrosion protection class (single or double protection for permanent anchors per BS EN 1537 or PTI recommendations).
Anchor systems are supplied by specialist companies including DSI (Dywidag), Freyssinet, VSL, and BBR, with installation by foundation contractors such as Bauer, Keller, and Soletanche Bachy. Procurement managers should ensure that anchor design is verified by proof and suitability testing on site (typically 5 to 10 percent of production anchors are proof-tested to 1.5 times design load). Grouting records, tendon certificates, and stressing records must be maintained as part of the quality documentation. For permanent anchors, specify double corrosion protection with HDPE sheathing and grout encapsulation to ensure the required 50 to 100 year service life in the GCC's potentially aggressive ground conditions.