Water Aeration Systems Suppliers, Saudi Arabia
Water aeration systems in Saudi Arabia are the pond aerators, blowers and diffusers, injectors and pure oxygen equipment used by Red Sea and inland fish farms, shrimp ponds, hatcheries, reservoirs and treatment lagoons. This page lists Saudi suppliers and covers type selection, design for hot saline water, SASO motor efficiency and SABER rules, and the factors behind price and delivery.
0 suppliers found
No suppliers match these filters
Try clearing some filters — or post your requirement and let matching suppliers come to you.
Post your requirement, get quotes from multiple suppliers
Tell us about water aeration systems in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
What are water aeration systems and where are they used in Saudi Arabia?
Water aeration systems dissolve oxygen into water and keep it moving, either mechanically at the surface, with compressed air through diffusers, or with pure oxygen. They are grouped with aquaculture equipment for Saudi farms, because oxygen supply is central to the Kingdom's growing fish and shrimp sector, but the same products serve irrigation reservoirs, landscape lakes and wastewater lagoons.
Saudipedia reports that MEWA targets 600,000 tonnes of marine species by 2030 and that the Kingdom farms in sea cages and inland systems, including hatcheries, shrimp farms and closed recirculating systems. Each of those needs a different aeration approach.
| System | Typical Saudi application | Main selection points |
|---|---|---|
| Paddlewheel aerator | Coastal shrimp ponds and earthen fish ponds | Units per pond, paddle speed, motor efficiency, gearbox life |
| Propeller-aspirator aerator | Ponds and lagoons needing deeper mixing | Motor speed, angle, depth, debris tolerance |
| Blower and fine bubble diffusers | Inland tank farms, RAS, hatcheries, activated sludge basins | Air flow and pressure, diffuser membrane, blower redundancy, dust filtration |
| Venturi injector or hydro-ejector | Tanks with existing pumps, small reservoirs | Pump duty, air draw, maintenance access |
| Oxygen cone, low head oxygenator or ceramic diffuser | High-density RAS, broodstock and transport tanks | Oxygen source (generator or liquid), transfer efficiency, control loop |
Shrimp-specific pond gear is covered on shrimp farm equipment for Saudi farms; tanks, cages and RAS on fish farm equipment in Saudi Arabia. Air supply is listed under rotary lobe blowers and side channel blowers, and gas under oxygen suppliers.
How should aeration be designed for Saudi heat and water?
Design for the hottest water you will see, because oxygen solubility falls as temperature and salinity rise while oxygen demand climbs. Inland farms on saline groundwater and Red Sea farms both face this, so peak summer conditions should drive the sizing.
Sizing
Request a written oxygen balance: biomass and feed rate (or treatment load), the saturation concentration at site temperature and salinity, and the delivered transfer rate of the offered units. The USGS DOTABLES calculator covers 0 to 40 degrees Celsius and 0 to 40 parts per thousand salinity, which spans most Saudi conditions; hotter or more saline sites need specialist data. For shrimp ponds, Claude Boyd (Global Seafood Alliance, 2020) cites the industry allowance of 1 hp per 300 to 500 kg of production as a rough guide only.
Motors and energy
Aeration runs most of the day, so motor efficiency counts. SASO 2893/2018, which the IEA lists as in force, sets the IE3 class for single-speed three-phase cage induction motors. Boyd notes that motors waste energy when lightly loaded and run best near 75 percent load, so avoid oversizing. An FAO paper on pond aeration recommends totally enclosed fan-cooled motors for units in spray.
Dust, sand and corrosion
Blower inlets need filters sized for sandstorms, and diffuser grids need a cleaning or replacement plan. Coastal units need corrosion-protected frames, plastic floats and sealed bearings.
Monitoring and backup
Fit online dissolved oxygen analyzers with alarms, and keep standby blowers and diesel generator backup on remote sites.
Which standards and rules apply to aeration systems in Saudi Arabia?
In Saudi Arabia the motors in aeration equipment fall under SASO energy efficiency rules, imported regulated machinery needs SABER conformity, and performance is compared using international oxygen transfer test standards. The table reflects sources checked as of 2026.
| Rule or standard | Applies to | Authority |
|---|---|---|
| SASO 2893/2018, minimum energy performance (IE3) for single-speed three-phase cage induction motors | Aerator, blower and pump motors in scope | SASO |
| Product conformity and shipment certificates | Regulated imported machinery and electrical products | SASO through SABER |
| EN 12255-15, clean water oxygen transfer test in aeration tanks | Diffused and mechanical aeration in treatment basins | CEN (BSI lists the UK edition as current, under review) |
| ASCE clean water oxygen transfer standard | Manufacturer oxygen transfer data | ASCE; confirm the current edition |
| Aquaculture project licence | The farm using the aeration | MEWA |
Read our guide to SASO and SABER certificates before importing blowers or aerators, and ask the notified body which items your HS codes cover.
Who supplies water aeration systems in Saudi Arabia?
Saudi buyers source aeration from aquaculture equipment importers, blower and diffuser specialists, wastewater contractors and industrial gas companies, depending on the job. Large farms often buy aerators direct from overseas factories and keep spares on site.
Brands with relevant product lines include Faggiolati submersible aerators and hydro-ejectors, Kaeser rotary blowers and Gardner Denver blower ranges. Municipal and industrial basins are usually part of sewage treatment plant packages. When you compare Saudi suppliers, ask:
- What oxygen transfer is guaranteed at site temperature, and to which test standard.
- Motor efficiency class and SABER documents.
- Which spares (membranes, paddles, gearboxes, filters) are held in Riyadh, Jeddah or Dammam.
- Who commissions the system and trains the operators.
Buyers who want comparable quotes can post a requirement with volumes, stocking or load, and power supply.
What affects the price and lead time of aeration systems in Saudi Arabia?
Price scales with the oxygen to be delivered and the system type, and running cost with energy, so efficiency and controls matter over a project's life. Lead time is driven by overseas manufacturing, SABER registration and freight into Jeddah Islamic Port or King Abdulaziz Port, Dammam.
- Peak oxygen demand and redundancy.
- Aerator or blower type and the pipework or floats that go with it.
- Motor efficiency class and variable speed control.
- Site remoteness, which raises installation and spares cost.
- Certification time for regulated items.
Sources
- Saudipedia: Fish farming in the Kingdom
- IEA policy database: SASO 2893/2018 minimum energy performance standards for electric motors
- Global Seafood Alliance: Energy use in aquaculture pond aeration, part 1 (Claude E. Boyd, January 2020)
- FAO: A search for a viable fishpond aeration system (aquaculture engineering consultation paper)
- USGS: DOTABLES dissolved oxygen solubility tables
- BSI: BS EN 12255-15:2003, measurement of oxygen transfer in clean water in aeration tanks