Slewing Bearings Suppliers, Saudi Arabia

Slewing bearings (slewing rings) are large-diameter bearings designed to handle combined axial, radial, and moment loads while allowing 360-degree rotation between two structures. They are used in cranes, excavators, wind turbines, turntables, and stackers. GCC construction and port equipment relies heavily on slewing bearings for tower cranes and material handling machines.

0 suppliers found

Active:CE Marking ASME ISO 45001 ISO 9001 Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about slewing bearings in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Slewing bearings are large rolling-element bearings with gear teeth machined on the inner or outer ring to provide both load support and rotational drive between two structures. Types include single-row ball, double-row ball, cross-roller, and three-row roller configurations. Diameters range from 200 mm to over 5,000 mm. Materials are typically through-hardened or surface-hardened alloy steel with corrosion-resistant coatings available.

In the UAE and Saudi Arabia, slewing bearings are installed in tower cranes, mobile cranes, and aerial work platforms, excavator upper-carriage rotation, port container handling equipment, solar panel tracking systems, and industrial turntables and positioners. Buyers should specify load capacity (axial, radial, and tilting moment), rotation speed, gear module and type (internal or external), bolt pattern, and expected service life.

Procurement lead times for standard slewing bearings range from 4 to 12 weeks, with custom sizes requiring 12 to 20 weeks. Regional suppliers stock common crane and excavator replacement slewing bearings for rapid MRO service. Buyers should verify heat treatment quality, gear tooth accuracy, and raceway hardness certificates. Installation requires precise bolt torquing and regular re-greasing at intervals suited to GCC conditions.

Frequently Asked Questions — Slewing Bearings

How often should slewing bearings be re-greased in GCC conditions?

Re-greasing intervals depend on load, speed, and temperature. In GCC heat, intervals may be shorter than standard recommendations, typically every 100 to 250 operating hours for crane applications. Use EP grease rated for high temperatures and verify greasing reaches all rolling elements through properly positioned grease nipples.

What causes slewing bearing failure on GCC construction equipment?

Insufficient lubrication in high temperatures, bolt relaxation leading to ring deformation, overloading beyond the rated capacity diagram, and sand contamination through damaged seals are the primary causes. Regular bolt torque checks and condition monitoring extend service life.

Can slewing bearings be refurbished?

Yes, specialised bearing service companies can regrind raceways, replace rolling elements, renew seals, and re-harden gear teeth. Refurbishment typically costs 40 to 60 percent of a new bearing and is a practical option for large, expensive slewing rings on GCC crane and port equipment.