FRP Pipes & Ducts Suppliers, Saudi Arabia
Covers FRP and GRP piping systems and duct systems manufactured by filament winding and hand layup for corrosive-service, water transmission and ventilation applications. FRP pipes offer a compelling alternative to alloy steel, stainless steel and lined carbon steel in GCC desalination, oil and gas, chemical processing and HVAC sectors. Procurement managers source by diameter, pressure class, media compatibility and joining method.
0 suppliers found
No suppliers match these filters
Try clearing some filters — or post your requirement and let matching suppliers come to you.
Post your requirement, get quotes from multiple suppliers
Tell us about frp pipes & ducts in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.
FRP pipes and ducts are composite piping systems manufactured primarily by filament winding, offering outstanding corrosion resistance, long service life and competitive installed cost for fluid conveyance and air handling across the UAE and Saudi Arabia. FRP piping is the standard material for sea-water intake and brine discharge in desalination plants, cooling-water circuits in power stations, process piping in chemical and petrochemical plants, and effluent lines in wastewater treatment facilities. FRP ducts serve fume-extraction and HVAC systems in corrosive industrial environments.
The GCC's more than 300 desalination plants represent one of the world's largest concentrated markets for FRP piping, with pipe diameters reaching 3000 mm for sea-water intake risers. In oil and gas, FRP is used for fire-water networks, produced-water lines, injection-water systems and utility piping on onshore and offshore facilities, reducing weight and eliminating the corrosion maintenance burden associated with carbon steel.
Procurement managers should specify pipe diameter, pressure class (PN6 to PN32 for typical applications), stiffness class (SN2500, SN5000 or SN10000 for buried installations), resin system (isophthalic polyester, vinyl ester or epoxy), liner type (C-glass veil or synthetic veil), and joining method (adhesive-bonded bell-and-spigot, laminated butt-and-strap, or mechanical coupling). Verify compliance with AWWA C950, ISO 14692 (oil and gas), BS 7159, or ASTM D2996/D2997. Evaluate manufacturers on winding-machine capacity for large diameters, in-house testing (hydrostatic, stiffness, axial tensile), and installation supervision and jointing services available on site.