Spray Foam Insulation Suppliers, UAE

Spray Foam Insulation is a liquid-applied polyurethane foam system that expands on contact with surfaces to create a seamless, air-tight insulation layer on roofs, walls, and irregular substrates in GCC buildings. Open-cell and closed-cell formulations offer different performance characteristics. Spray foam's ability to conform to complex geometries and seal air leaks makes it effective for retrofit insulation and hard-to-insulate areas.

0 suppliers found

Active:3.5+ stars ASME ISO 9001 API 20+ years Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about spray foam insulation in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Spray polyurethane foam (SPF) insulation is applied as a two-component liquid that reacts and expands on the substrate surface, forming a rigid or semi-rigid foam layer. Closed-cell SPF (density 30 to 60 kg/m3) provides high thermal resistance (lambda 0.022 to 0.028 W/mK), acts as a vapour barrier, and adds structural rigidity. Open-cell SPF (density 7 to 15 kg/m3) provides good thermal and acoustic performance at lower cost but requires a separate vapour barrier. Application thicknesses typically range from 25mm to 100mm in a single pass.

In the UAE and Saudi Arabia, spray foam insulation is used for metal roof underside insulation in existing warehouses and factories (avoiding costly roof replacement), cold store and freezer insulation (seamless coverage eliminating thermal bridges), tank and vessel insulation at industrial facilities, retrofit insulation of existing buildings, and complex geometry areas where board insulation cannot be fitted. Key specifications include foam type (open-cell or closed-cell), target R-value or U-value, density, fire classification (SPF must be protected by a thermal barrier such as gypsum board in occupied spaces), and compliance with ASTM C1029 for SPF quality.

Major spray foam system suppliers in the GCC include BASF (Elastospray), Huntsman, Dow, and Lapolla. Application is performed by specialist spray foam contractors using proportioning equipment that mixes and heats the two chemical components before spraying. Procurement managers should select contractors with documented experience in the specific application type, verify that the foam system carries the required fire classification, and ensure that occupied spaces adjacent to the spray area are evacuated during application due to chemical fumes. Post-application fire testing and thickness verification should be specified for quality assurance. Lead times for mobilisation are typically 1 to 3 weeks.

Frequently Asked Questions — Spray Foam Insulation

Is closed-cell spray foam better than open-cell for GCC buildings?

Closed-cell SPF offers higher R-value per millimetre (approximately R-6 per inch versus R-3.7 for open-cell), acts as its own vapour barrier, and adds structural rigidity. It is preferred for most GCC applications where moisture resistance and maximum thermal performance in minimum thickness are important. Open-cell SPF is useful for acoustic applications and situations where breathability is desired, but requires a separate vapour barrier in air-conditioned Gulf buildings.

Can spray foam be applied to an existing metal roof without removing it?

Yes, this is one of the most common applications in the GCC. Closed-cell spray foam is applied directly to the underside of the existing metal roof from inside the building, creating a seamless insulated layer that eliminates condensation, improves thermal performance, and seals air leaks. This retrofit method is far less disruptive and costly than replacing the roof assembly. A protective coating or cladding must cover the foam for fire compliance and UV protection.

What fire protection is required over spray foam insulation?

In occupied building spaces, spray foam insulation must be covered by a thermal barrier — typically 12.5mm gypsum board — to delay foam ignition and protect occupants. In non-occupied spaces such as attics, a less stringent ignition barrier may be acceptable. The specific requirement depends on the building code and Civil Defence authority. Intumescent coatings are sometimes used as an alternative thermal barrier in industrial and warehouse applications.