Skip to main content

Gate Valves Suppliers, UAE

Gate valves provide full-bore, bidirectional isolation in pipelines by raising or lowering a wedge-shaped gate across the flow path. They are the most common isolation valve in oil and gas, water, and process piping systems across the GCC. Regional stockists carry extensive inventories of gate valves in carbon steel, stainless steel, and alloy grades to API 600, API 602, and API 603 standards.

0 suppliers found

CityAll CitiesDubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairah
Filters6 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:API ASME ISO 9001 CE Marking ISO 45001 5+ years Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about gate valves in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Gate valves are linear-motion valves designed to provide tight shut-off for on/off isolation service. The gate disc moves perpendicular to the flow, offering a full-bore passage with minimal pressure drop when fully open. Designs include rising stem, non-rising stem, flexible wedge, and solid wedge variants in cast, forged, and fabricated body constructions. Pressure classes typically range from 150 to 2500 in line with ASME B16.34.

In the UAE and Saudi Arabia, gate valves are installed across upstream oil and gas pipelines, refinery process piping, water transmission mains, district cooling networks, and power plant steam systems. Buyers should specify pressure class, body and trim materials per the piping material class, end connections (flanged, butt-weld, or socket-weld), and compliance with relevant standards such as API 600 for cast steel or API 602 for forged steel valves.

Procurement considerations include supplier inventory depth for common sizes, material test certificates to EN 10204 3.1, third-party inspection capability, and compliance with Aramco or ADNOC engineering standards where required. Dubai and Dammam are the primary valve stocking hubs for the GCC, and many distributors offer valve modification services including special coatings, extended bonnets for cryogenic service, and locking devices.

Frequently Asked Questions — Gate Valves

When should I use a gate valve versus a ball valve?
Gate valves are preferred for large-bore, infrequent-operation isolation duties where full-bore passage and low pressure drop are required. Ball valves offer faster quarter-turn operation and are better for frequent cycling. In GCC pipeline applications, gate valves dominate in sizes above 6 inches.
What are the most common gate valve standards in GCC projects?
API 600 for cast steel gate valves and API 602 for forged steel are the primary standards. ASME B16.34 governs pressure-temperature ratings. Saudi Aramco and ADNOC typically add supplementary requirements through their engineering standards (SAES and ADES respectively).
How do I verify gate valve quality before shipment?
Request material test certificates to EN 10204 3.1, hydrostatic shell and seat test per API 598, and dimensional verification. For critical service, third-party inspection by agencies such as TUV, Bureau Veritas, or Lloyds is standard practice in GCC projects.
Are slab gate valves available from GCC stockists?
Yes, slab (through-conduit) gate valves are stocked by major pipeline valve distributors in Dubai and Dammam, particularly for pipeline pigging and oil and gas mainline applications where a full-bore unobstructed path and double block and bleed capability are required.