Skip to main content

Electric Submersible Pumps Suppliers, UAE

Electric Submersible Pumps (ESPs) are multi-stage centrifugal pumps installed downhole to lift large volumes of fluid from oil and gas wells. The system consists of a motor, seal section, pump intake, multi-stage pump, and power cable running to a surface variable speed drive. ESPs are the dominant artificial lift method in the GCC for high-rate wells, with thousands deployed across ADNOC and Aramco operations.

0 suppliers found

CityAll CitiesDubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairah
Filters4 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:API CE Marking ISO 9001 20+ years Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about electric submersible pumps in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Electric submersible pumps are the workhorse artificial lift technology across the UAE and Saudi Arabia, deployed in thousands of wells to maintain the region's massive production output. ESPs can handle production rates from as low as 200 barrels per day to over 40,000 barrels per day, making them suitable for virtually any high-volume production scenario from onshore carbonate wells to offshore platforms.

An ESP system comprises a downhole motor (rated from 30 HP to 1,500+ HP), a protector/seal section, a gas separator or handler, a multi-stage centrifugal pump (30 to 500+ stages), and an armored power cable connected to a surface-mounted variable speed drive (VSD). Key specifications include pump capacity and head rating at the well's fluid viscosity, motor voltage and amperage, cable temperature rating, and gas handling capability. For GCC applications, operating temperature ratings of 150-250 degrees Celsius and abrasion-resistant materials are important due to the region's high bottomhole temperatures and sandy reservoirs.

Buyers should evaluate suppliers on system reliability data (MTBF), range of pump and motor sizes, availability of high-temperature and abrasion-resistant configurations, and the quality of their well monitoring and optimization software. Major ESP manufacturers — Baker Hughes (REDA brand), SLB (SUMMIT), and Weatherford — maintain significant GCC inventory, repair centers, and field engineering teams in Abu Dhabi, Dhahran, and Dubai. Frame agreements with performance-based pricing (cost per barrel lifted) are becoming standard practice for large operators.

Frequently Asked Questions — Electric Submersible Pumps

What ESP size do I need for my well?
ESP sizing depends on target production rate, total dynamic head (depth plus flowing wellhead pressure), fluid properties (gravity, viscosity, water cut), and gas-to-liquid ratio. Suppliers use software to model pump performance curves against your well conditions. Always provide accurate well data — inaccurate inputs are the leading cause of premature ESP failure.
What causes ESP failures in GCC wells?
The most common failure modes are motor burnout from overheating (often caused by low fluid flow past the motor), pump wear from sand and abrasive particles, scale buildup on pump stages, and cable insulation breakdown from high temperatures. Proper sizing, gas handling, sand management, and chemical treatment programs extend ESP run life.
How long does it take to install or replace an ESP?
Installing or pulling an ESP requires a workover rig and typically takes 3-7 days depending on well depth and complexity. In the GCC, workover rigs are in high demand, so scheduling pull-and-replace operations requires advance planning. Some operators maintain standby ESPs and workover rigs on dedicated contracts to minimize deferred production.
What monitoring systems should I use with ESPs?
All modern ESPs should be equipped with downhole gauges measuring intake pressure, temperature, motor temperature, and vibration. Surface monitoring includes VSD parameters (frequency, voltage, current) and production flow rates. Advanced systems use AI-driven analytics to predict failures and optimize pump speed in real time. Monitoring data should integrate with the field's SCADA system.