Skip to main content

Solenoid Valves Suppliers, Saudi Arabia

Solenoid valves are electromechanically operated valves that open or close when an electrical coil is energised, providing fast-acting on/off control for gases, liquids, and steam in automated systems. They are integral to process control, safety instrumented systems, pneumatic actuation circuits, and water treatment dosing across GCC industrial facilities.

0 suppliers found

CityAll CitiesRiyadhJeddahDammamKhobarMeccaMedina
Filters5 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:3+ stars API ASME CE Marking ISO 45001 Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about solenoid valves in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Solenoid valves use an electromagnetic coil to actuate a plunger that opens or closes a valve orifice, providing rapid switching action in milliseconds. Types include direct-acting (for small orifices and low flows), pilot-operated (for larger flows using system pressure to assist opening), and semi-direct-acting designs. Body materials include brass, stainless steel, and engineered polymers with NBR, FKM, or PTFE seals.

In the UAE and Saudi Arabia, solenoid valves serve pneumatic panel and actuator pilot circuits, emergency shutdown systems, water and wastewater treatment chemical dosing, HVAC control, irrigation systems, and beverage dispensing equipment. Buyers should specify voltage and frequency (24VDC, 110VAC, or 220VAC/50Hz for GCC), media compatibility, pressure range, orifice size, enclosure rating (IP65 minimum for outdoor GCC installations), and ATEX or IECEx certification for hazardous areas.

Procurement considerations include coil power consumption, response time, duty cycle rating (continuous versus intermittent), and the availability of replacement coils and seal kits from regional distributors. Low-power latching solenoid valves are gaining traction in GCC solar-powered irrigation and remote pipeline applications where power consumption must be minimised.

Frequently Asked Questions — Solenoid Valves

What voltage should I specify for solenoid valves in GCC installations?
24VDC is standard for process control and safety systems. 220VAC at 50Hz is used for HVAC and general utility applications. Always verify that the coil voltage matches the control system output and that the solenoid includes appropriate surge suppression for the supply type.
How do I select between direct-acting and pilot-operated solenoid valves?
Direct-acting solenoid valves work at zero differential pressure and any flow direction, ideal for small orifices. Pilot-operated valves require a minimum pressure differential to open and offer larger flow capacity at lower coil power. For GCC compressed air and water applications with adequate line pressure, pilot-operated types are cost-effective.
What IP rating is recommended for outdoor GCC installations?
IP65 is the minimum for outdoor industrial solenoid valves in the GCC to protect against dust and water jets during washdown. For coastal or extremely dusty desert environments, IP67 or higher with UV-resistant cable glands provides additional protection.